Tag Archives: Spindle Speeds

1998

By Surplus Record | Published: June 5, 2013, 12:13 PM

Want to Sell Mori Seiki SH-500 HMC, Full 4th-Axis, New: 1998 http://machnet.com/buy/detail.cfm?inventoryid=29448 Mori Seiki SH-500/40 Full 4th Axis, Horizontal Machining Center New: 1998 S/N: 782 Specifications: Travels: 24.8" x 23.6" x 25.6" Pallet size: 19.7" x 19.7" Max. workpiece swing dia.: 28.7" x 26.8" Surface to spindle center: 2.0-25.6" Center to spindle: 5.9-31.5" Max. table [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged | Comments closed

FADAL VMC 2216HT, 88HS CNC CONTROL, 10,000 RPM SPINDLE, CAT-

By Surplus Record | Published: May 15, 2013, 7:09 AM

Want to Sell FADAL VMC 2216HT, 88HS CNC CONTROL, 10,000 RPM SPINDLE, CAT- X-AXIS TABLE TRAVEL: 22" Y-AXIS SADDLE TRAVEL: 16" Z- AXIS SPINDLE HEAD TRAVEL: 20" MAXIMUM DISTANCE SPINDLE TO TABLE: 24" RAPID TRAVERSE RATE: 700IPM SPINDLE TAPER: CAT-40 SPINDLE SPEEDS: 10-10,000 RPMS SPINDLE DRIVE MOTOR: 15 HP AUTOMATIC TOOL CHANGER Contact: Chase Thornton, [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged , | Comments closed

5’12″ CINCINNATI-BICKFORD “SUPER-SERVICE” RADIAL DRILL

By Surplus Record | Published: May 7, 2013, 2:16 PM

Want to Sell 5'12" CINCINNATI-BICKFORD "SUPER-SERVICE" RADIAL DRILL 5'12" CINCINNATI-BICKFORD "SUPER-SERVICE" RADIAL DRILL Model 3E, New 1953 Serial No 3E1399 Power Arm and Elevation Power Clamping to (Head, Arm & Column) Arm Length: 5' Column Diameter: 12" Horizontal Head Travel on Arm: 3' Vertical Arm Travel on Column: 2'7" Vertical Spindle Travel in Head: 16" [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged | Comments closed

DRILLS. RADIAL

By Surplus Record | Published: April 4, 2013, 8:45 AM

Want to Sell DRILLS. RADIAL AMERICAN 7' x 19" RADIAL ARM DRILL with GIANT 48" x 60" BOX TABLE INVENTORY # 5614-K MODEL: 7' x 19" S/N: 77848 MADE IN THE USA EQUIPPED WITH PRE-SELECTIVE HYDRAULIC POWER SHIFT HEAD (SPINDLE SPEEDS & FEEDS) SPECIFICATIONS: ARM LENGTH: 7' COLUMN DIAMETER: 19" SPINDLE SPEEDS: (32) 15-1200 RPM [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged , , | Comments closed

DRILLS, RADIAL

By Surplus Record | Published: March 27, 2013, 10:02 AM

Want to Sell DRILLS, RADIAL AMERICAN 7' x 19" RADIAL ARM DRILL INVENTORY # 5614-K MODEL: 7' x 19" S/N: 77848 MADE IN THE USA EQUIPPED WITH PRE-SELECTIVE HYDRAULIC POWER SHIFT HEAD (SPINDLE SPEEDS & FEEDS) SPECIFICATIONS: ARM LENGTH: 7' COLUMN DIAMETER: 19" SPINDLE SPEEDS: (32) 15-1200 RPM MORSE TAPER IN SPINDLE: # 5 DIAMETER [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged , , | Comments closed

Cegielski Radial Arm Drill

By Surplus Record | Published: March 25, 2013, 5:43 AM

Want to Sell Cegielski Radial Arm Drill Cegielski Radial Drill 8' x 17" Serial #1855 Year 1975 220/440, 3 Phase 15 HP Spindle Spindle Taper # 5 Spindle Speeds 30-1700 Feed Range .003" to 0.125" All Feeds and Speeds Functionable Runs and Sounds Like New 8' Arm, good condtion 17"Column Cleaned, and cycled Adjusted Spindle [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged | Comments closed

Homach Gap Bed Engine Lathe, 18″/22″ x 48″cc distance

By Surplus Record | Published: March 7, 2013, 1:56 PM

Want to Sell Homach Gap Bed Engine Lathe, 18"/22" x 48"cc distance Homach Gap Bed Engine Lathe/ Ref.#61-296 Model No. KM-1800S Serial No. 4747 Swing Over Bed Ways: 18" Swing In Gap: 22-3/4" Swing Over Cross Slide: 9-3/4" Maximum Distance Between Centers: 48" Width of Gap: 8" Spindle Speeds, (16): 12 – 1500 RPM Hole [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged , | Comments closed

FUTURMILL OPENSIDE PLANO MILL

By Surplus Record | Published: February 26, 2013, 8:56 AM

Want to Sell FUTURMILL OPENSIDE PLANO MILL FUTURMILL OPENSIDE PLANO MILL S/N: 530084 YEAR: 1966 TABLE: CLAMPING AREA 22��€šÂ¬ï¿½€žÂ¢ X 4��€šÂ¬ï¿½€žÂ¢ (OVERALL LENGTH: 23.3��€šÂ¬ï¿½€žÂ¢) Table Travel ……………………. 264" Maximum Milling Width ……………. 48" HEIGHT UNDER RAIL: 48" BOTH SPINDLES SPEEDS: 53-900 RPM Spindle Speeds (18) ……………… 56-890 RPM Spindle Taper …………………… #50 MMT EQUIPPED WITH: [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged , | Comments closed

OPEN SIDE PLANO MILL

By Surplus Record | Published: February 26, 2013, 8:54 AM

Want to Sell OPEN SIDE PLANO MILL FUTURMILL OPENSIDE PLANO MILL S/N: 530084 YEAR: 1966 TABLE: CLAMPING AREA 22€™ X 4€™ (OVERALL LENGTH: 23.3€™) Table Travel ……………………. 264" Maximum Milling Width ……………. 48" HEIGHT UNDER RAIL: 48" BOTH SPINDLES SPEEDS: 53-900 RPM Spindle Speeds (18) ……………… 56-890 RPM Spindle Taper …………………… #50 MMT EQUIPPED WITH: [...]

Posted in Daily Wanteds/For Sale Listings | Also tagged , | Comments closed