Surplus Record Machinery

GEAR REDUCERS, Without Driving Unit

GEAR REDUCERS, Without Driving Unit Surplus Record
 Turbine Services with Engineering Support
There are 562 listings in this category
File update: Mon, Feb 6, 2012 01:50
Advanced Search
Sort by:
Original Sort

4.43 HP @ 1750 RPM, Falk #4E3 concentric reducer, 57.66:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

5 HP @ 1740 RPM, Louis Allis, 159:1 ratio, vari-speed 3.7-11 RPM out (#0517607) rfq

Plantex Equipment Co, Stafford, TX 713-723-9181 (Fax 713-723-9048) Steve Kay

5 HP @ 1750 RPM, Falk #1080F3, concentric shaft, 195.5:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

5 HP @ 1750 RPM, U.S. Hercules Syncrogear, R.A.Helical bevels,#2303-50-1-184TC (12) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

5 HP @ 1765 RPM, U.S. #VEUEVHG, vari-speed 188-1595 RPM output (#0749400) rfq

Plantex Equipment Co, Stafford, TX 713-723-9181 (Fax 713-723-9048) Steve Kay

5 HP @ 1800 RPM, Falk Radicon, AUD 10-R/L-d-1800-1, 1 FRPM rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

7.5 HP @ 1750 RPM, Falk #1040FZ2A, 17.37:1 ratio, 100 RPM Output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

7.57 HP @ 1750 RPM, Falk #1020FC2, 2.658:1 ratio, concentric rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

8 HP @ 1800 RPM, Morse, 5:1 ratio, 30RW, rt.& left 1, -3 rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

8 HP @ 1800 RPM, Westinghouse T-7, 101.4:1 ratio, parallel shaft (4)   rfq

Rubber City Machinery Co, Akron, OH 330-434-3500 (Fax 330-434-2244) R.J. Westfall

10 HP @ 900 RPM, Fessler, size 350X-3, 251:1 ratio, offset par., unused rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

10 HP @ 1170 RPM, Falk #5C2, 25.66:1 ratio, 45 RPM Output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

10 HP @ 1745 RPM, U.S. #VEU-TF-GH, 2.29:1 ratio, v-spd 200-1595rpm out (#0546509) rfq

Plantex Equipment Co, Stafford, TX 713-723-9181 (Fax 713-723-9048) Steve Kay

10 HP @ 1750 RPM, Dodge R.A. WG40A,CG40,CM40, 13-1,40-1,120-1,162-1,surplus (6) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

10 HP @ 1750 RPM, Falk #1425WJM, 5:1 ratio,1.5 SF,vertical input right angle,new (2) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

10 HP @ 1750 RPM, Falk #5APC, Sewage clarifier, 4 shaft design, new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

10 HP @ 1750 RPM, Falk Ultramite #09UCBN2-40-1, 23:1, 55:1, C-faces, surplus (5) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

10 HP @ 1750 RPM, Falk, Size 4EZ, w/scoop mount, 13.59:1 ratio, par (2) rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

10 HP @ 1750 RPM, U.S. #CBN2502, 10:1 ratio, 280 TC input, base mtg. rfq

Dreisilker Electric Motors In, Glen Ellyn, IL 800-922-1882 (Fax 630-469-0155) Paul Condos

11.2 HP @ 1750 RPM, Foote Jones #734YSL concentric reducer, 57.5:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

15 HP @ 58 RPM, Hub City #801-30-1 Worm, R.A. 8"C.D., C-face, surplus (6) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

15 HP @ 174 RPM, Falk #09UCBNZA10N, 10:1 ratio, Ultramite rfq

Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Fax 419-244-8887) Jim / Dave

15 HP @ 600 RPM, Falk #2135Y4S, 401.4:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

15 HP @ 1750 RPM, Cyclo #H19160-319-1, H4225D354-1, new surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

15 HP @ 1750 RPM, Foote Jones #821, 823, 8345SL, 47:1, 11:1, 7.59, new (4) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

15 HP @ 1750 RPM, Hub City #801, 8" C.D., 30-1, R.A., C-face,new (6) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

15 HP @ 1750 RPM, Sumitomo Cyclo, V3275, vert.,very large 551000 in-lbs tq.,new (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

15 HP @ 1755 RPM, Falk #152-7E23-06A, 47.77:1 ratio, 37 RPM out, shovel mount (#0925900) rfq

Plantex Equipment Co, Stafford, TX 713-723-9181 (Fax 713-723-9048) Steve Kay

15 HP @ 1765 RPM, Reeves, size 442 assembly 105, vari-speed 24-190 RPM out (#0536117) rfq

Plantex Equipment Co, Stafford, TX 713-723-9181 (Fax 713-723-9048) Steve Kay

15 HP @ 1800 RPM, David Brown Worm, AA2002/U-25-1, 68 FRPM rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

15 HP @ 1800 RPM, Eurodrive, R8LOP-254TC, 9.65:1 ratio, par (7) rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

15 HP @ 1800 RPM, Falk #1050FC2A, 13.48:1 ratio, 125 RPM output rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

15 HP, Hub City model 1010, 2:1 ratio, R.A. rfq

Alfred L Brown Assoc Inc, Auburn, MA 508-754-5382 (Fax 508-754-2049) Paul Boudas

15 HP, SEW Eurodrive, 18.19:1 ratio,right angle,flange mount,KF96LP254TC (2) rfq

Electric Motors & Drives Inc, Anderson, SC 864-224-6623 (Fax 864-226-2856) Dave Cothran

15.8 HP @ 1750 RPM, Falk #1050F2, concentric shaft, 25.22:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

16 HP @ 1800 RPM, Horsburgh & Scott #110-T, 267.09:1 ratio, new rfq

Rubber City Machinery Co, Akron, OH 330-434-3500 (Fax 330-434-2244) R.J. Westfall

16.5 HP @ 1750 RPM, Falk #4C2, concentric shaft, 9.277:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

16.7 HP @ 1750 RPM, Falk #1070FC3A, 71.15:1 ratio, inline   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

17 HP @ 1800 RPM, Eberhardt, right & left 1, 20:1 ratio, 70 RW rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

17.1 HP @ 1750 RPM, Falk #1040F2, concentric shaft, 11.2:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

18 HP @ 1750 RPM, Boston #H-27, ratio, used rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

19.3 HP @ 1750 RPM, Falk #2040F2, 19.81 ratio concentric rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

20 HP @ 58 RPM, FMC/Link-Belt, worm gear, shaft up, 29.9 ratio (3) rfq

Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Fax 419-244-8887) Jim / Dave

20 HP @ 1150 RPM, Horsburgh & Scott #110TSP, 106.5:1 ratio, 1.06 SF (2) #939 Show item detail rfq

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

20 HP @ 1450 RPM, Link-Belt, Size BT-4200-62, 264:1 ratio, offset par (2) rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

20 HP @ 1750 RPM, Cyclo Sumitomo #H3215, HV4215, 174-1, 59-1, 87-1 (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

20 HP @ 1750 RPM, Falk #1070FZ2AA, 20.54:1 ratio, 84 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

20 HP @ 1750 RPM, Falk #1100FZ3, 102:1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

20 HP @ 1750 RPM, Falk #2090YBX, 143:1 ratio, right angle rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

20 HP @ 1750 RPM, Falk #2307J, shaft mount, 9.0:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

20 HP @ 1750 RPM, Falk #RK2050F2A, 25.27:1 ratio, par, 69 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

20 HP @ 1750 RPM, Flender #DR121K-26-1, vertical mixers (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

20 HP @ 1750 RPM, Foote Jones #725, 7255, 734SL, 57:1, 25:1, 31:1 (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

20 HP @ 1750 RPM, Hercules Syncrogear 50GM-64-1 Concentric,Helical Planetary (4) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

20 HP @ 1750 RPM, Philadelphia PTE10 Mixer, 21-1, 38-1 surplus (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

21 HP @ 1750 RPM, Falk #1030FC2, 5.201:1, concentric rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

21.7 HP @ 870 RPM, Cone-Drive,size HU8270A,CD-12,70:1 ratio,rt.& left angle (3) rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

23 HP @ 1750 RPM, Falk #1040FC2, 7.479:1 ratio, concentric rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

24 HP @ 1750 RPM, Falk #50BULA, 5.167:1 ratio, 10.5 RPM Output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

24 HP @ 1750 RPM, Falk #60BULA, 9.75:1 ratio, 180 RPM Output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

24 HP @ 1800 RPM, Falk #8GDFT, 70.34:1 Ratio, Par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

24.3 HP @ 1750 RPM, Falk #70F2, concentric shaft, 31.08:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

24.4 HP @ 1750 RPM, Falk #1100FC3A, 155.6:1 ratio, inline   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

25 HP @ 1750 RPM, Cyclo Sumitomo #H3190, 87-1, 29-1, 102-1, 35-1, surplus (8) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

25 HP @ 1750 RPM, Falk, Size 5EZ, w/scoop mount, 14.2:1 ratio, par rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

25 HP @ 1750 RPM, Grove 8" C.D. Worm R.A. Surplus, 20:1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

25 HP @ 1750 RPM, Link-Belt #HTS1500-105-1, surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

25 HP @ 1750 RPM, Mercury Rexnord planetary, diff. ratios, surplus (5) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

25 HP @ 1750 RPM, Rexnord Neptunes, new surplus, 741-1, 159-1, 100-1 (4) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

25 HP @ 1800 RPM, Falk #1060FC2A, 13.49:1 ratio, 125 RPM output rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

25 HP, Grove Worm 8" C.D., 20-1, R.A. Shield Worm rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

25.8 HP @ 1750 RPM, Falk #1060F2, concentric shaft, 31.42:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

27 HP, Falk #2110YB3, right angle, 60.82:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

28 HP @ 3.8 RPM, Foote Jones, large, double worm, 16"CD, new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

30 HP @ 650 RPM, Falk #2175YN4S, 349.1:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

30 HP @ 1250 RPM, #1050GHB1-K, 5.08:1 Ratio, 246 RPM output, new, unused rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

30 HP @ 1750 RPM, Dorris #5829, 29:1 ratio, new surplus (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

30 HP @ 1750 RPM, Falk #2050Y1-LD, 3.074:1 ratio, 569 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

30 HP @ 1750 RPM, Falk #2130Y3-B, 206.4:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

30 HP @ 1750 RPM, Falk #284,305,300,400AFX/MDX, 24:1, 81:1, 47:1, 71:1, 17:1 (9) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

30 HP @ 1750 RPM, Flender #DR142K-26-1, vertical mixers (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

30 HP @ 1750 RPM, Paramax, Sumitomo 8055P4, 8065P4, 8075R4 (5) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

30 HP @ 1750 RPM, Philadelphia #3803-S, 3809-S, 3833-S, 3835-S, 21-1 thru 438-1 (8) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

30 HP @ 1800 RPM, Jones, 63.7:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

30 HP, Falk #RK2040F2A, 5.083:1 ratio, new, never used rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

30 HP, Falk, 36.65:1 ratio rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

30.3 HP @ 360 RPM, #1080FCB3AS, 360 RPM, 3.1784:1 ratio, 113 RPM output (4) rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

32.55 HP @ 580 RPM, Xtek #510, 30.8:1 ratio, parallel, 19 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

33 HP @ 1750 RPM, Falk #2060GHB, 5.083:1 ratio, right angle rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

34.64 HP @ 29.1 RPM, Link-Belt, 60:1 ratio, right angle, size 250 rfq

Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Fax 419-244-8887) Jim / Dave

36 HP @ 125 RPM, Foote Jones #823SL-FFU22015, 14:1 ratio rfq

Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Fax 419-244-8887) Jim / Dave

36 HP @ 1750 RPM, Cleveland, 10.33:1 ratio, Size 70ESC, rt or left or up-4 rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

36.2 HP @ 1150 RPM, Cone-Drive,size HU8270A,CD-12,70:1 ratio,rt.& left angle (3) rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

39 HP, Falk #2060Y2, 30.92:1 ratio, new   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

39.7 HP @ 1750/56 RPM, Falk, 31.08:1 ratio, scoop rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

40 HP @ 1200 RPM, U.S. #VEU, vari-speed 470-1880 RPM output (#0522602) rfq

Plantex Equipment Co, Stafford, TX 713-723-9181 (Fax 713-723-9048) Steve Kay

40 HP @ 1750 RPM, Cyclo Sumitomo H1905-29-1, surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

40 HP @ 1750 RPM, Dodge Maxum, Sizes DCR 3, 4, 5, 6 - 5:1, 11:1, 17:1, 6:1 (5) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

40 HP @ 1750 RPM, Dorris 8300 Series, 7:1, 29:1 ratios, new surpus (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

40 HP @ 1750 RPM, Falk #1060FZ2A, 9.110:1 ratio, 190 RPM out, parallel rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

40 HP @ 1750 RPM, Falk #2050, 1050 FZ, FC, qty (9) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

40 HP @ 1750 RPM, Falk #2060Y2, parallel shaft, 31.98:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

40 HP @ 1750 RPM, Falk #2100Y3C-85-1, new surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

40 HP @ 1750 RPM, Falk #2177YN4-S, 772:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

40 HP @ 1750 RPM, Falk #3407J-25, 26:1 ratio, shaft mount rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

40 HP @ 1750 RPM, Paramax, Sumitomo 7050P4-130-1, surplus (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

40 HP @ 3600 RPM, Lufkin #NITOC, 8.743:1 ratio, 3.0 S.F., reconditioned rfq

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

40.2 HP @ 1750 RPM, Falk #5CB3, right angle, 9.397:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

40.4 HP @ 1750 RPM, SM Cyclo #6195, parellel shaft,43:1 ratio,surplus rfq

B & M Electric Motor Service Inc, Hickory, NC 828-267-0829 (Fax 828-267-0874) Shannon McDonald

41.3 HP @ 1750 RPM, Falk #1080FC3, concentric shaft, 39.6:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

41.4 HP @ 1750 RPM, Westinghouse #78D concentric reducer, 36.94:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

45 HP, Falk #2080Y2, 45.84:1 ratio, New   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

46 HP @ 1750 RPM, Falk #1070FC2, 25.12:1 ratio, concentric rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

46.8 HP @ 1750 RPM, Falk #1050F2, concentric shaft, 7.584:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

48 HP @ 1750 RPM, Brooks Hansen #QHPJ4RLK560, 581.7:1 ratio, parallel power gear reducer Show item detail rfq

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Fax 520-836-1944) Dan/Nate

48 HP, Falk #2080Y2-LS, 40.865:1 ratio, new   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

49 HP @ 1750/19.7 RPM, Falk, 93.24:1 ratio, offset par rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

50 HP @ 1200 RPM, Falk, 7.645:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

50 HP @ 1250 RPM, Falk #2179ZN4-S, 768.7:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

50 HP @ 1750 RPM, Dodge #TCR7-31-1, new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

50 HP @ 1750 RPM, Falk #1050FCB3-14-1, 14:1 ratio, new, surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

50 HP @ 1750 RPM, Falk #2177YN4-S, 772:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

50 HP @ 1750 RPM, Foote Jones #833SL, 38-1 ratio, New rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

50 HP @ 1750 RPM, Venus Rexnord planetary, diff ratios, surplus/rebuilts (6) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

50 HP, Falk #100YZ-S, 8.47:1 ratio (2) rfq

Weeks Marine Inc, Cranford, NJ 908-272-4010 (Fax 908-272-4740) Vinnie Lynch

50 HP, Falk #75CB3-12A7-39-1 Helical Bevel rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

50 HP, Philadelphia #3409 BT Thru 3421BT, surplus, cool tower (6) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

50.4 HP @ 1150 RPM, Cone #120HV, worm gear, 50:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

52.2 HP @ 1750 RPM, Falk #4315J, 25:1 ratio, shaft mount rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

53 HP @ 153 RPM, Falk #GC202A5, concentric, unused rfq

Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Fax 419-244-8887) Jim / Dave

56 HP, Falk #2070Y2, 31.32:1 Ratio, New   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

57.8 HP @ 1750 RPM, Foote #1725Y, 20.83:1 ratio,84 rpm out,shovel mount [#0551306] rfq

Plantex Equipment Co, Stafford, TX 713-723-9181 (Fax 713-723-9048) Steve Kay

58 HP @ 1750 RPM, Philadelphia #6HL2, concentric shaft, 6.218:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

60 HP @ 1750 RPM, Cone #HU8200x 15-1 , vertical shaft down, 12"C.D. (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

60 HP @ 1750 RPM, Falk #1070FZ2A, 8.996:1 ratio, 190 RPM out, parallel rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

60 HP @ 1750 RPM, Falk #2070YBX3, 18:1, 26:1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

60 HP @ 1750 RPM, Falk #425A4-A, 126.2:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

60 HP @ 1750 RPM, Marley, Cool Tower, Sizes 22, all ratios, qty (8) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

60 HP @ 1750 RPM, Philadelphia #PTE20 Mixer, 21-1, 26-1 rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

60 HP @ 1750 RPM, U.S. Motors #CBN2302 thru CBN2903, Surplus (7) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

60.6 HP @ 1750 RPM, Falk #2080Y2L, 38.82:1 ratio, parallel (5)   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

62 HP @ 1750 RPM, Foote Jones #0902BHE, 16.795:1 ratio, 104 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

63 HP, Falk #2090Y2-LS, 46.49:1 ratio, new rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

65 HP @ 1800 RPM, Dodge, TMX-600, 5.07:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

65 HP @ 1800 RPM, Link-Belt #HS-800-65, 8.4:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

67 HP @ 692 RPM, Falk #2135Y2A, 38.71:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

67 HP, Falk #2080Y2, 35.16:1 Ratio, New   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

68 HP @ 1750 RPM, Philadelphia #3409-BT, right angle, 3.38:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

70 HP @ 550 RPM, Falk #2195YN3-S, 173.9:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

70 HP @ 1150 RPM, Lufkin #D220C, 18.9:1 ratio, 2.0 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

70 HP @ 1750 RPM, Dodge #TXM500, 6.333:1 ratio, parallel, 276 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

70 HP @ 1800 RPM, D.O. James, 18.2:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

73 HP @ 1750 RPM, Lufkin #D195C, 19.4:1 ratio, 2.0 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

74 HP @ 1750 RPM, Falk #60YB2, right angle, 7.654:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

75 HP @ 1150 RPM, Western, 12.7:1 ratio, off set par, Size D56 rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

75 HP @ 1170 RPM, Philadelphia #115HP3, 16.6:1 ratio, 25 RPM output, surplus rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

75 HP @ 1255 RPM, Falk #2090Y1-LD, 6.786:1 ratio, 185 RPM out, parallel rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

75 HP @ 1750 RPM, Cyclo #HV3225, H4225, 354-1, 29-1, surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Cyclo Sumitomo #H3255-43-1, low hours rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Cyclo #HV3235-59-1 and H3235-15-1, new (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Earths Rexnord Planetary,diff.ratios,new surplus/rebuilt (14) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Falk #2060GHB1-KB, 2.261:1 ratio,right angle,774 RPM output (2) rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

75 HP @ 1750 RPM, Falk #2060YB2, 11:1 & 9:1 ratios, qty (8) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Falk #8C2, 3, 4, 14:1, 57:1, 196-1 (7) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Falk, #2080GHB1-A, 5.083:1 ratio, 344 RPM Output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

75 HP @ 1750 RPM, Foote Jones #210SHC 9.51-1, 270DHA 57-1 Herring Bone Cut rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Foote Jones #8345SL, 47:1 ratio, New rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Hercules Syncrogear #45GTM , 87:1, 47:1, 31:1, new (10) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Link-Belt #HT3000-31-1, others rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1750 RPM, Paramax, Sumitomo 9015P2, 9030R3, 9035P2, surplus (4) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1800 RPM, Dodge #TCR12-194-1, surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

75 HP @ 1800 RPM, Falk #6EZ, 4.1:1 ratio, par, 420 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

75 HP @ 1800 RPM, Falk #752-100FZ2A, 13.76:1 ratio (3) rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

75 HP, Falk #2135Y3-C, 118.10:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

76 HP, Falk #2080Y2-LS, 31.08:1 Ratio, new   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

78.9 HP @ 860 RPM, Foote Bros.,size 150DX,16:7 ratio,52 RPM out,offset par (4) rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

81 HP @ 1750 RPM, Falk #80F2, concentric shaft, 11.55:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

82.5 HP @ 1750 RPM, Falk #7CB3-12B5, 21.03:1 ratio, right angle   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

82.5 HP @ 1750 RPM, Falk #7CB3-12B5, 21.03:1 ratio, right angle rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

83 HP @ 1750 RPM, Falk #11090F2A, 30.42:1 ratio, concentric rfq

Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Fax 503-285-8075) Paul Hansen

89 HP @ 1730 RPM, Falk #2060YIA,5.056:1 ratio,1.43 SF (2) rfq

Rotation Power & Equipment, Neilburg, SK 877-823-4818 (Fax 306-823-4811) Mel Dueck

94.5 HP @ 1750 RPM, Falk #2070GHB, right angle, 2.765:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

97 HP, Falk #2100Y2-LS, 47.189:1 Ratio, new   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

100 HP @ 670/8.46 RPM, Falk, 79.279:1 ratio, offset par rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

100 HP @ 1200 RPM, Lufkin #T350CS, 52.6:1 ratio, parrallel shaft rfq

Erie Mill & Press Co Inc, Erie, PA 814-454-1581 (Fax 814-454-7913) John A. Nowak

100 HP @ 1750 RPM, Eurodrive #R163, 63:1, 97:1 , ratios, new (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

100 HP @ 1750 RPM, Morse Bevel, 1:1 ratio, right angle #12 rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

100 HP @ 1750 RPM, Falk #2100Y2-L, 32.17:1 ratio, 54.4 RPM out, parallel (2) rfq

U S Equipment, Huntington, WV 304-525-0002 (Fax 304-525-5739) Jamie Elk

100 HP @ 1750 RPM, Amarillo #1311, 13:1, 14:1 ratio, #1008 9:1 ratio cooling twr drive (10) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

100 HP @ 1800 RPM, Falk #2050Y1, 3.44:1 ratio, 508 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

100 HP, Falk #7CBA3, right-angle-double-shaft, 2.46:1 ratio (10) rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

104 HP @ 870 RPM, Falk #8GHB, obsolete right, 5.2:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

104 HP @ 1750 RPM, Falk #7GHB, 3.529:1 ratio, right angle rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

105 HP @ 1750 RPM, Philadelphia #10HP-2, 25.6:1 ratio, 1.50 SF, Gear Reducer rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

105 HP @ 1800 RPM, Jones, 33.1:1 ratio, par, 240 DHC rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

110 HP @ 1750 RPM, Falk #325A3-AR, 17.44:1 ratio, 100.3 RPM output,unused rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

115 HP @ 1800 RPM, Lufkin #S105, 4.55:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

119 HP @ 1750 RPM, Dodge, 11:1 ratio, 154 output, parallel, new surplus rfq

Rogers Equipment Sales Inc, Durango, CO 800-990-7374 (Fax 970-259-7177) Jeff/ Joey/Cale

120 HP @ 1750 RPM, Falk #1130F3A, 69.12:1 ratio, concentric rfq

Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Fax 503-285-8075) Paul Hansen

120 HP @ 1750 RPM, Link Belt #D280-21HK-RL-3-56,57.22:1 ratio,31.3 RPM out,unused rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

121 HP @ 1750 RPM, Sumitomo #PX8085P4YBL, 126.389:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

121 HP Nuttall, angle right-left, 39.397:1 ratio, new (2) rfq

North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Fax 252-235-2457) Richard/ Ike

122 HP @ 1630 RPM, Falk #2125YB2-LS, 8.92:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

125 HP @ 857 RPM, Horsburgh & Scott #SLBD-890, 12.49:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

125 HP @ 1150 RPM, Western, 12.9:1 ratio, off set par, Size D58 rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

125 HP @ 1200 RPM, Falk #2070Y1-A, 4.120:1 ratio, 291 RPM output   rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

125 HP @ 1750 RPM, Falk #2100Y2-B, 22.19:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

125 HP @ 1750 RPM, Falk #405A3-AB, 31.03:1 ratio rfq

Industrial Fabrication & Repair, Knoxville, TN 865-637-1742 (Fax 865-522-3234) Mac or Lester

125 HP @ 1750 RPM, Hansen #RDF44, right angle, 90:1 ratio, never used Show item detail rfq

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Fax 520-836-1944) Dan/Nate

125 HP @ 1750 RPM, Link-Belt #BD 2400-62, 20.8:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

125 HP @ 1750 RPM, Link-Belt #HD2250, HT3500 11:1, 34:1 (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

125 HP @ 1750 RPM, Philadelphia #13HP, 14HP, 86:1, 159:1 rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

125 HP, Falk #2090, 2110, 2125YBX2, YBX3, 49:1, 63:1, 15:1 ratio (6 units) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

126 HP @ 1750 RPM, Falk #90YB2, right angle, 13.87:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

126 HP @ 1770 RPM, Falk #2100Y2-S, 20.37:1 ratio, 1.44 SF (2) rfq

Rotation Power & Equipment, Neilburg, SK 877-823-4818 (Fax 306-823-4811) Mel Dueck

128 HP @ 1750 RPM, Falk #2110Y2B, 39.97:1 ratio, parallel   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

128 HP @ 1750 RPM, Falk #2110Y2B, 39.97:1 ratio, parallel   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

134 HP, Beloit Size 3 differential drive w/P.I.V. rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

140 HP @ 1750 RPM, Horsburgh & Scott, size 140-T,45.29:1 ratio,offset par. rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

140 HP, Falk #2100Y2, 34.899:1 Ratio, New   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

140 HP, Falk #2110Y2-LS, 40.64:1 Ratio, New   rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

141 HP @ 1750 RPM, Falk #2110YB3A, 38.92:1 ratio, right angle rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

141 HP @ 1750 RPM, Falk #2110YB3A, 38.92:1 ratio, right angle rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

142.5 HP @ 1150 RPM, Michigan, Cone 12CD, right angle, type HO, 10:1 ratio rfq

Rubber City Machinery Co, Akron, OH 330-434-3500 (Fax 330-434-2244) R.J. Westfall

144 HP @ 1800 RPM, Lufkin #S105, 4.55:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

146 HP @ 1660 RPM, Link-Belt, 31.4:1 ratio, 53 RPM output, par, M#HD2350-65 rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

147 HP @ 1120 RPM, Hansen #RDC21F-BN-11.2, 1.47 SF, 98.8 RPM output, 11.225 ratio rfq

Surplus Solutions Inc - USA, Salisbury, NC 919-585-2512 () Heather Everett

148 HP @ 1750 RPM, Dodge #DR1100A, 31.4:1 ratio, in-line-par rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

149 HP @ 1165 RPM, Foote Bros., size 227, 21.1:1 ratio, 56 RPM, in-line par. rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

150 HP @ 750 RPM, Falk #1100YF-1-S, 3.516:1 ratio, extended output shaft rfq

Rubber City Machinery Co, Akron, OH 330-434-3500 (Fax 330-434-2244) R.J. Westfall

150 HP @ 1150 RPM, Falk #2080YB2-L, 6.105:1 ratio, 188 RPM out, right angle rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

150 HP @ 1200 RPM, Falk #2060Y1-LD, speed reducer, 2.207 ratio rfq

Surplus Solutions Inc - USA, Salisbury, NC 919-585-2512 () Heather Everett

150 HP @ 1750 RPM, Amarillo #1712, 13:1, #1713, 17-1 ratio, cooling tower drive (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, Falk #1100FC2A, 11.37:1 ratio, 153.64 RPM output rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

150 HP @ 1750 RPM, Falk #2110Y2, 33:1, 18:1, 47:1 ratios (6) others rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, Falk #2110Y2L, 32.63:1 ratio rfq

Industrial Fabrication & Repair, Knoxville, TN 865-637-1742 (Fax 865-522-3234) Mac or Lester

150 HP @ 1750 RPM, Falk #2120Y2-A, 17.28:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

150 HP @ 1750 RPM, Falk #2130Y2B, 45.53:1 ratio rfq

Industrial Fabrication & Repair, Knoxville, TN 865-637-1742 (Fax 865-522-3234) Mac or Lester

150 HP @ 1750 RPM, Falk #2130Y2-L, 45.56:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

150 HP @ 1750 RPM, Falk #385AB3-CB, 24.72:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

150 HP @ 1750 RPM, Falk #4C, 25.66:1 ratio rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

150 HP @ 1750 RPM, Falk #7C2-02B3, 7.735:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

150 HP @ 1750 RPM, Falk Ultramite #12UBBC, 18:1 ratio, R.A., Hel/Bevel rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, Foote Jones #1502BHE, 30.913:1 ratio, right angle (2) rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

150 HP @ 1750 RPM, Link-Belt #HTI, 31:1, surplus, Concentric Helical rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, Link-Belt, HD-1650-67, 17:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

150 HP @ 1750 RPM, Nord #SK92S440T, 11:1 ratio, concentric w/shovel (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, Philadelphia #PVE 11-S mixer, 11:1, aerator duty rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, Philadelphia, 90 PSA- aerator duty, 31:1 rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, Rexnord "Saturn" 21-1 rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, Sumitomo/Paramax #SM7050 R2RRV-11-1 cool tower (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1750 RPM, West. Nuttall #98D, large concentric,31-1,5. 5"shaft dia.,new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

150 HP @ 1800 RPM, Westech #2592, 13.1:1 ratio, 140 RPM output, shaft up (2) rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

157 HP @ 1170 RPM, Falk #2070Y1, parallel shaft, 4.929:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

160 HP @ 762 RPM, Horsburgh & Scott #360T,159:1 ratio,1.5 SF,3189000 in./#torque rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

179 HP @ 1725 RPM, Philadelphia #11HP-3, 38.4:1 ratio, new rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

180 HP @ 1690 RPM, Falk #2120Y2-S, 10.06:1 ratio, 168 RPM out, parallel rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

187 HP @ 1750 RPM, Falk #2070Y2, parallel shaft, 9.044:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

190 HP @ 1170 RPM, Falk #2110YB2, right angle, 21.530:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

190 HP @ 1660 RPM, Link-Belt #HD2500-65, 31.4:1 ratio, 53 RPM output, par rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

190 HP, SM-Cyclo, angle Parallel, 29 ratio, new rfq

North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Fax 252-235-2457) Richard/ Ike

192 HP @ 1750 RPM, Falk #2175YN3-L, 116.1:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

193 HP @ 5000 RPM input, Elliott #C-2, 4.02:1 ratio, 1.5 SF (2) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

195 HP @ 1700 RPM, Philadelphia #324-T, 121:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

195 HP @ 1750 RPM, Link-Belt, size C180, 9:1 ratio, parallel rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

199 HP @ 1750 RPM, Philadelphia #3415BT, right angle, 4.130:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

200 HP @ 805 RPM, Falk #2130Y2-B, 11.86:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

200 HP @ 870 RPM, Falk #2080Y1-LS, 2.241:1 ratio, 388 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

200 HP @ 1131 RPM, Falk #2100GHB1-A, 5.083:1 ratio,223 RPM out,right angle (2) rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

200 HP @ 1150 RPM, Falk #2090YB2-L, 5.144:1 ratio, 224 RPM out, right angle rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

200 HP @ 1200 RPM, Farrel #DR-30, 47 RPM output, 25.29:1 ratio, parallel rfq

Tech First Machinery Inc, Charlotte, NC 704-552-0046 (Fax 704-552-6718) Fred Boling

200 HP @ 1425 RPM, Falk #2160YBXD3-A, 39.59:1 ratio, 90° down, 2.31 S.F.   Show item detail rfq

Northwest Pulp & Paper Eq Co, Amboy, WA 360-247-5151 (Fax 360-247-6266) Dawn Lingle

200 HP @ 1650 RPM, Flenders #KZN-360,20.67:1 ratio,3.1 SF,rt.angle,622 HP cap.(2) rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

200 HP @ 1725 RPM, Jones, 314.6:1 ratio, 20 ton   rfq

Allegheny Gear Boxes, Delmont, PA 800-245-2497 (Fax 724-468-5919) John Wagner

200 HP @ 1750 RPM, Falk #2100YB3, YBX, 31:1, 57:1, 21:1 ratio (4) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

200 HP @ 1750 RPM, Falk #2120Y2-B, 26.15:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

200 HP @ 1750 RPM, Falk #2120Y2-S, 23.15:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

200 HP @ 1750 RPM, Falk #2130Y2-B, 25.4:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

200 HP @ 1750 RPM, Falk #2130Y2-B, 28.19:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

200 HP @ 1750 RPM, Falk #405A3, surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

200 HP @ 1750 RPM, Falk #405AB4-129-1, 87:1 ratio, New (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

200 HP @ 1750 RPM, Falk #425AB3-CR, 31.97:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

200 HP @ 1750 RPM, Falk #445AB3, 34.25:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

200 HP @ 1750 RPM, Foote Jones #1502-BHE, 25.42:1 ratio,68 RPM out, rt.angle rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

200 HP @ 1750 RPM, Marley #36-11-1, #38-11-1, #32.1 T- 7.89 -1 surplus (4) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

200 HP @ 1750 RPM, Rexnord Planetary "Neptunes", all ratios (14) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

200 HP @ 1750 RPM, Rexnord Titan planetary, 37:1, like new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

200 HP @ 1750/154 RPM, Westinghouse, 11.372:1 ratio, offset par rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

200 HP @ 7318 RPM, Westinghouse #SU86, 4.11:1 ratio, 1.3 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

202 HP, Dodge, 5.38:1 ratio, T19 rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

220 HP @ 1750 RPM, Falk #2125Y2-LB, 28.12:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

225 HP @ 1170 RPM, Falk #100YB2 right angle reducer, 7.587:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

225 HP @ 1750 RPM, Falk #1120F2A, 32.19:1 ratio, concentric rfq

Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Fax 503-285-8075) Paul Hansen

228 HP @ 1420 RPM, Falk #2090Y1, parallel shaft, 6.231:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

230 HP @ 457 RPM, Lufkin #DF370, 2 Speed, 4.2 & 10:1 Ratio, Ref.#61133 rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

230 HP @ 1750 RPM, Link-Belt #HDS2900-17-1, new steel housing backstop rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

233 HP @ 1750 RPM, Falk #2135Y2, 45.56:1 ratio, parallel (2)   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

238 HP @ 1765 RPM, Falk #2070Y1-S, 900 RPM output, 1.944:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

250 HP @ 1150 RPM, Falk #2100YB2-L, 6.222:1 ratio, 185 RPM out, right angle rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

250 HP @ 1150 RPM, Western, 6.04:1 ratio, par, Size S67 rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

250 HP @ 1750 RPM, Dodge #TCR10, 47:1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

250 HP @ 1750 RPM, Falk #1100LBXD3, 26:1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

250 HP @ 1750 RPM, Falk #2125Y2-LD, 22.39:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

250 HP @ 1750 RPM, Falk #425A3-AB, 32.16:1 ratio rfq

Industrial Fabrication & Repair, Knoxville, TN 865-637-1742 (Fax 865-522-3234) Mac or Lester

250 HP @ 1750 RPM, Falk #425AB3-AB, 25.2:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

250 HP @ 1750 RPM, Flender #225-14-1, offset, surplus (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

250 HP @ 1750 RPM, Flender, 1.5 SF, gear reducer rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

250 HP @ 1750 RPM, Saturn Rexnord planetary, 21:1 rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

250 HP @ 1750 RPM, Flender #XSBL360-39-1, XBSN400-62-1 Aerator duty (5) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

250 HP @ 1800 RPM, Chemineer #10HBP-250, 17:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

250 HP @ 3600 RPM, Lufkin #N250C, Gear Reducer, 19.2:1 ratio, 1.70 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

254 HP @ 1170 RPM, Falk #2110Y2, parallel shaft, 15.540:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

254 HP, Falk #2140-72S, 8.33:1 ratio   rfq

Weeks Marine Inc, Cranford, NJ 908-272-4010 (Fax 908-272-4740) Vinnie Lynch

255 HP @ 4000/900 RPM, Philadelphia, gear reducer (3) rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

264 HP @ 1750 RPM, Falk #2060Y1-B, 3.789:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

280 HP @ 1160 RPM, Falk #2175Y3-S, 42.926:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

288 HP @ 1750/69.2 RPM, Alten offset par (2) rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

294 HP @ 1170 RPM, Falk #2100YB2, right angle, 11.590:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

300 HP @ 960 RPM, U.S./Hercules #5010HP2, 3.409:1 ratio, 282 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

300 HP @ 1100 RPM, H & S #LD-4000, 17.42:1 ratio rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

300 HP @ 1150 RPM, Prager #LS1800, offset parallel, 5.50:1 ratio, new   rfq

North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Fax 252-235-2457) Richard/ Ike

300 HP @ 1170 RPM, Falk #13GDD, 36.53:1 ratio, parallel   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

300 HP @ 1244 RPM, Falk #2110GHB1-A, 4.041 ratio, 306 RPM out, right angle rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

300 HP @ 1282 RPM, Falk #2110GHB1-A, 3.357:1 ratio, 382 RPM out, right angle rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

300 HP @ 1750 RPM, Falk #2130YT 2 , 11-1, 39-1, 21-1 (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

300 HP @ 1750 RPM, Falk #2150Y2-A, 28.36:1 ratio, 61.7 RPM out, parallel rfq

U S Equipment, Huntington, WV 304-525-0002 (Fax 304-525-5739) Jamie Elk

300 HP @ 1750 RPM, Falk #445AB3-AB, 21.48:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

300 HP @ 1750 RPM, Falk #700,800,900MDX2, 3,4 stage,31:1,21:1,57:1,1122 ratios (5) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

300 HP @ 1750 RPM, Foote Jones #1401HLE-5.12-1 (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

300 HP @ 1750 RPM, Johnson R.A. Irrigation Drive H3001 Ratio 6-5 1, new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

300 HP @ 1750 RPM, Philadelphia #PVE140-26-1 mixer, aerator duty (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

300 HP @ 1750 RPM, Westinghouse Nuttall #D12-13-1 Offset, low hours rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

300 HP @ 1770 RPM, Western #8109FC, 2.806:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

301 HP @ 1750 RPM, Falk #100Y1, parallel shaft, 5.039:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

302 HP @ 1750 RPM, Xtek, size 1201, 20.9:1 ratio, 83 RPM output, parallel rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

305 HP @ 1750 RPM, Philadelphia #4215, 25.8:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

320 HP, Worthington Form D-3, 4916/1150 parallel shaft, 1.5 SF, 4.275:1 ratio rfq

MC Marine, Jersey City, NJ 201-433-0870 (Fax 201-433-9287) Mike Nahon

323 HP @ 1750 RPM, Foote Brothers #18MD, 127.5 RPM output, 137.25:1 ratio   rfq

Allegheny Gear Boxes, Delmont, PA 800-245-2497 (Fax 724-468-5919) John Wagner

327 HP @ 1630 RPM, Falk #2120Y2-LS, 7.719:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

328 HP @ 1750 RPM, Foote Brothers #18MD, Style A,105.49 RPM output,16.4:1 ratio   rfq

Allegheny Gear Boxes, Delmont, PA 800-245-2497 (Fax 724-468-5919) John Wagner

350 HP @ 900 RPM, Falk #2100Y1, 2.759:1 ratio, 326 RPM output (4) rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

350 HP @ 1750 RPM, Falk #1080YF1-3.79-1, 1100YFI-4.5-1 Herringbone rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

350 HP @ 1750 RPM, Falk #1120FC2, 7.63:1, 26:1 ratio (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

350 HP @ 1750 RPM, Falk #140Y2, 20.87:1 ratio, parallel shaft rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

350 HP @ 1750 RPM, Falk #445AB3-AS, 29.2:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

350 HP @ 1750 RPM, Falk #445B3-AS, 29.2:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

350 HP @ 1750 RPM, Falk #525A4, 397-1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

350 HP @ 1750 RPM, Flender #H1SH5, 2.81:1 ratio, w/fans, qty (12) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

350 HP @ 1750 RPM, Nuttall Westinghouse #F88D-7.59-1, 26-1 Concentric surplus (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

350 HP @ 1750 RPM, Western #BS-116, Bevel R.A. Box, 1.62-1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

351 HP @ 495 RPM, Lufkin #DF370, 2 Speed, 3.4 & 7.4:1 Ratio, Ref.#61130   rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

358 HP @ 1750 RPM, Falk #2145Y2B, 41.67:1 ratio, parallel rfq

Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Fax 503-285-8075) Paul Hansen

370 HP @ 1750 RPM, Falk #445AB3, 29:1 ratio, new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

372 HP @ 5700 RPM, Lufkin #N1000C, 5.6:1 ratio, 1.7 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

375 HP, Western, 14.315:1 ratio, 1.5 SF   rfq

Weeks Marine Inc, Cranford, NJ 908-272-4010 (Fax 908-272-4740) Vinnie Lynch

376 HP @ 1150 RPM, Lufkin #147B, 2.38:1 ratio, parallel power gear reducer   Show item detail rfq

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Fax 520-836-1944) Dan/Nate

380 HP @ 1750 RPM, Falk #2090Y1, parallel shaft, 5.133:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

389 HP @ 1750 RPM, Falk #10GDA, 10.83:1 ratio, parrallel reducer rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

390 HP @ 1750 RPM, Falk #2130Y2-B, 17.3:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

390 HP @ 1800 RPM, Falk #2080Y1M, 1.089:1 ratio, 1635 RPM output (3) rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

400 HP @ 650/1600 RPM, Paceco Type MHR, 27.56:1 ratio, (1) unused   rfq

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

400 HP @ 1150/226 RPM, Nuttall, 5.086:1 ratio, offset par rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

400 HP @ 1750 RPM, D. O. James #B400-HD, 18.3:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

400 HP @ 1750 RPM, D. O. James #B400-HD, 21.3:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

400 HP @ 1750 RPM, Falk #100Y1S, 2.805:1 ratio, 633 RPM output, 2.23 SF rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

400 HP @ 1750 RPM, Falk #110Y1A, 4.02:1 ratio, 1.55 SF (2) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

400 HP @ 1750 RPM, Falk #1300LBXD3, 25:1 ratio, new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

400 HP @ 1750 RPM, Falk #2100Y1B, 2.759:1 ratio, 645 RPM output, 2.67 SF rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

400 HP @ 1750 RPM, Falk #2125Y2-14-1, Gear Reducer rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

400 HP @ 1750 RPM, Falk #2130YB2-S, 22.27:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

400 HP @ 1750 RPM, Falk #2145YB2-S, 27.23:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

400 HP @ 1750 RPM, Falk #2150Y2-B, 31.68:1 ratio rfq

Industrial Fabrication & Repair, Knoxville, TN 865-637-1742 (Fax 865-522-3234) Mac or Lester

400 HP @ 1750 RPM, Falk #445AB3, 34.25:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

400 HP @ 1750 RPM, Foote Jones #1001HLE, w/all cooling access,1.89-1 ratio,surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

400 HP @ 1750 RPM, Lufkin #S-127C, 4.33:1 ratio, 1.5 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

400 HP @ 1750 RPM, Lufkin #S127C, 4.33:1 ratio, 1.5 SF (2) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

400 HP @ 1750 RPM, Nuttall Westinghouse #D12C 6.2-1, D15K 31.-1, surplus (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

400 HP @ 1770 RPM, Falk #445A2-B, 21.17:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

400 HP, Link-Belt, 63:1 ratio   rfq

Allegheny Gear Boxes, Delmont, PA 800-245-2497 (Fax 724-468-5919) John Wagner

403 HP @ 1750 RPM, Dodge, M#TCR12, 31.21:1 Ratio, surpus, 56 RPM Output, Par rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

405 HP @ 1750 RPM, Falk #2120FC2A, 31.89:1 ratio, offset-par rfq

Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris

450 HP @ 700 RPM, Falk #MH-165Y2-A-61717-0016, 7.80:1 ratio rfq

Jet Electric Motor Co, Pawtucket, RI 401-725-9050 (Fax 401-725-3060) Mike or Dave

450 HP @ 817 RPM, Falk #1130F1A, 4.129:1 ratio rfq

Industrial Fabrication & Repair, Knoxville, TN 865-637-1742 (Fax 865-522-3234) Mac or Lester

450 HP @ 1000 RPM, Falk #405A, 4.062:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

450 HP @ 1725 RPM, Falk #2100Y2-LB, 9.302:1 ratio rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

450 HP @ 1750 RPM, Dodge #DR1200, 14:1, 21:1 ratio (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

450 HP @ 1750 RPM, Hercules Syncrogear #90A, B GMV,Aerator Duty (4) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

450 HP @ 1750 RPM, F-J #1301-HLE, 4.57:1, 383 RPM output (2) rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

450 HP @ 1767 RPM, Lufkin #S600D, 1.245:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

460 HP @ 10006 RPM, Western #115HS60, 5.62:1 ratio, 1.3 SF   rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

470 HP, Hansen #RDF21F-AN-14, speed reducer, 14.080:1 ratio rfq

Surplus Solutions Inc - USA, Salisbury, NC 919-585-2512 () Heather Everett

476 HP @ 440 RPM input, Thyssen, 8.544:1 ratio, Ref.#61576   rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

483 HP @ 400 RPM input, X-Tek, 8.534:1 ratio, 1.75 S.F., Ref.#61575 rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

497 HP @ 1750 RPM, Falk #2190Y3-KS, 142.4:1 ratio, parallel rfq

Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Fax 503-285-8075) Paul Hansen

500 HP @ 1150 RPM, LUFKIN #S148C, parallel power gear reducer, 3.2:1 ratio Show item detail rfq

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Fax 520-836-1944) Dan/Nate

500 HP @ 1170 RPM, Falk #2120Y1-L, 4.619:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

500 HP @ 1170 RPM, Falk #2175YN2-B, 25.85:1 ratio rfq

Industrial Fabrication & Repair, Knoxville, TN 865-637-1742 (Fax 865-522-3234) Mac or Lester

500 HP @ 1750 RPM, Alten #SG-228-1F-6.2, 6.2:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

500 HP @ 1750 RPM, Falk #100Y1-A, 3.243:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

500 HP @ 1750 RPM, Falk #2110Y1-S, 3.757:1 ratio, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

500 HP @ 1750 RPM, Falk #405A-1, 4.4:1 ratio, surplus (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

500 HP @ 1750 RPM, Falk #465AB3, 27:1 ratio, new rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

500 HP @ 1750 RPM, Hansen #NL21-BN-16, 15.76:1 ratio rfq

Jet Electric Motor Co, Pawtucket, RI 401-725-9050 (Fax 401-725-3060) Mike or Dave

500 HP @ 1800 RPM input, #2100Y1-B, 535.7 RPM output, 3.360:1 ratio rfq

Laron Inc., Tucson, AZ 520-887-4816 (Fax 520-888-6551) Karissa Bujanda

500 HP @ 3600 RPM, Lufkin #M2211A, 9:1 ratio, 1.75 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

540 HP @ 800 RPM, Western #S-61-B, 2.272:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

557 HP @ 6195 RPM input, Lufkin #N1000, 3.50:1 ratio, 2.00 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

560 HP @ 1750 RPM, Philadelphia #109-T, 4:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

570 HP @ 1750 RPM, Western, Fr. 8214, 12.9:1 ratio, sleeve bearings rfq

Rotation Power & Equipment, Neilburg, SK 877-823-4818 (Fax 306-823-4811) Mel Dueck

580 HP @ 4700 RPM input, Turbodyne #E-4, 3.60:1 ratio, 1.7 SF (2) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

600 HP @ 650/1600 RPM, X-Tek Gear Reducer, 27.805:1 ratio, ref.#63344   rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

600 HP @ 1150 RPM, Falk #2125Y1-LS, 3.738:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

600 HP @ 1170/348.2 RPM, Falk, 3.36:1 ratio (3) rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

600 HP @ 1200 RPM, Foote Jones #26T, 57:1 ratio, herringbone (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

600 HP @ 1750 RPM, Falk #2145Y2, 37:1 ratio, qty (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

600 HP @ 1750 RPM, Falk #2170Y2-B, 25.85:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

600 HP @ 1750 RPM, Falk #2170YN2-B, 30.57:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

600 HP @ 1750 RPM, Falk #485A3-79-1, new (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

600 HP @ 1750 RPM, Nuttall Westinghouse #S15, 3.3-1, 3.8-1 (3) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

600 HP @ 1750 RPM, Paramax #PX8085P3, 23:1 ratio, PX8095P3Y, 31:1 ratio, One Each rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

600 HP @ 1800 RPM, Lufkin #T540H, 42:1 ratio parallel shaft rfq

Erie Mill & Press Co Inc, Erie, PA 814-454-1581 (Fax 814-454-7913) John A. Nowak

600 HP @ 4818 RPM, Terry #S, 2.72:1 ratio, 1.70 SF, Gear Reducer rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

600 HP @ 6195 RPM, Lufkin #N107B, Gear Reducer, 3.50:1 ratio, 1.30 SF (3) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

609 HP @ 1750 RPM, Falk #2130Y2, 17.30:1 ratio, parallel shaft rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

620 HP @ 1800 RPM, Link-Belt #CD-355, 19.66:1 ratio, 89 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

620 HP @ 4894 RPM, Terry #Q, 2.76:1 ratio, 1.84 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

622 HP @ 1620 RPM, Flenders, 20.67:1 ratio, KZN-360, left-right angle (2) rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

626 HP @ 1750 RPM, Falk #2080Y1, parallel shaft, 2.349:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

630 HP @ 4500 RPM, Western #4112, Gear Reducer, 4.47:1 ratio, 1.75 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

641 HP, Terry #QM-2, 4970/1150 parallel shaft, 1.25 SF, 4.321:1 ratio rfq

MC Marine, Jersey City, NJ 201-433-0870 (Fax 201-433-9287) Mike Nahon

650 HP @ 4500 RPM, Lufkin #MH125S, 3.93:1 ratio, 1.7 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

660 HP @ 6620 RPM input, Elliott #C-4, 3.53:1 ratio, 1.5 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

680 HP @ 1170 RPM, Falk #445A2-CR, 7.059:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

700 HP @ 1687 RPM, Falk #485A3-CR, 33.68:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

700 HP @ 1687 RPM, Falk #485A3-CR, 33.68:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

700 HP @ 1750 RPM, Falk #1100YF1-4.46-1 Herring Bone rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

700 HP @ 1790 RPM, Lufkin #N1000C, 3.255:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

700 HP @ 1800 RPM, Lufkin #S148CH, 3.854:1 ratio, 467 RPM output rfq

Romanoff Industries Inc, Toledo, OH 419-691-2888 (Fax 419-691-7837) Mark/Jay

700 HP @ 6690 RPM, Western #95HSA90, 3.78:1 ratio, 1.5 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

700 HP, Farrel #DR44, gear reducer, 6.96:1 ratio, #68AD2 rfq

G-2000 Inc, Toledo, OH 419-536-4445 (Fax 419-536-4846) Scott Yoder

701 HP @ 1170/348.2 RPM, Falk, 3.36:1 ratio rfq

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

723 HP @ 3375 RPM, Philadelphia #211-09, 2.81:1 ratio, 1.75 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

725 HP @ 1200/35 RPM, Hansen, 34.103:1 ratio, 2.07 SF   rfq

RAM Opportunities, Miami, AZ 480-983-0755 (Fax 206-338-3484) Richard Gresham

730 HP @ 1750 RPM, Sumitomo Paramax #7090P3-31-1 (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

741 HP @ 1000 RPM, Lufkin #S169C, 4.52:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

750 HP @ 650/1600 RPM, X-Tek Gear Reducer, 41.06:1 ratio, ref.#63346   rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

750 HP @ 1024/256 RPM, Cincinnati #RPM5, 4:1 ratio, Ser.3, unused   rfq

M J Lindner Power Equipment, Hemet, CA 951-927-4316 (Fax 951-927-6121) Mike Lindner

750 HP @ 1200 RPM, Foote Jones #27D, herringbone, 42:1 ratio (4) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

750 HP @ 1750 RPM, Falk #1090YF1-A, 3.76:2 Ratio (2) rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

750 HP @ 4500 RPM, Elliott #C-6, 5.51:1 ratio, 1.7 SF, Gear Reducer rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

760 HP, 900 RPM, David Brown #AH2-450, 20.73:1 ratio (2) rfq

RAM Opportunities, Miami, AZ 480-983-0755 (Fax 206-338-3484) Richard Gresham

760 HP, Falk #2190YN2-5, 500 RPM output, 30.77:1 Ratio rfq

RAM Opportunities, Miami, AZ 480-983-0755 (Fax 206-338-3484) Richard Gresham

785 HP @ 1750 RPM, Falk #2080Y1, parallel, 1.08:1 ratio w/dual HS fans rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

800 HP @ 1750 RPM, Gear Works assem. 132662, 4.963:1 ratio, parallel shafts Show item detail rfq

L & L Machinery Co Inc, Olympia, WA 800-858-0091 (Fax 360-352-9929) Wally/Reggie

800 HP @ 1780 RPM, Falk #425A1-CR, 5.0:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

800 HP @ 1780 RPM, Falk #425A1-CR, 5:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

800 HP @ 4142 RPM, Elliott #C5, 3.51:1 ratio, 1.62 SF   rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

800 HP @ 5351 RPM input, Elliott #C3R4, 2.97:1 ratio, 1.81 SF   rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

834 HP @ 400 RPM, Lufkin #N2410A, 8:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

842 HP @ 1400 RPM, Hansen #RDG21F-AN14, 99.4 RPM output, 14.080:1 ratio rfq

Surplus Solutions Inc - USA, Salisbury, NC 919-585-2512 () Heather Everett

850 HP @ 1750 RPM, Falk #2120Y1-LR, 6.867:1 ratio, parallel rfq

Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Fax 503-285-8075) Paul Hansen

862 HP @ 6100 RPM, Worthington #F-4, 5.1:1 ratio, 1.5 SF (2) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

869 HP @ 1750 RPM, Falk #2090Y1-B, 1.848:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

883 HP @ 1750 RPM, Falk #2170YN2B, 30.57:1 ratio, parallel rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

900 HP @ 1100 RPM, Westinghouse #10G6816, 2.85:1 ratio, parallel rfq

Ace Armature Works, Baton Rouge, LA 225-356-6175 (Fax 225-356-4744) John McCarstle

900 HP @ 1150 RPM input, Westinghouse #DHR36, 15:1 ratio, (2) available   rfq

Rubber City Machinery Co, Akron, OH 330-434-3500 (Fax 330-434-2244) R.J. Westfall

900 HP @ 1750 RPM, Falk #2165YBX3 rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

900 HP @ 1750 RPM, Philadelphia #3518 VBHX, 9-1,R.A. hel./bevel shaft dwn cool twr rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

900 HP @ 2500 RPM, Falk #425A1-C, 1.826:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

900 HP @ 6353 RPM, Philadelphia #220-10, 8.89:1 ratio, 1.75 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

908 HP @ 720 RPM, Western S-17 #1129, 5.03:1 ratio   rfq

Allegheny Gear Boxes, Delmont, PA 800-245-2497 (Fax 724-468-5919) John Wagner

920 HP @ 4000 RPM, Farrel #DR44, 13.3:1 ratio, 1.75 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

938 HP @ 1790 RPM, Farrell #SR2212, ratio: 5.4545:1 rfq

Samco Enterprises Inc, Houston, TX 281-443-6505 (Fax 281-443-4777) Mark Miller

946 HP @ 1750 RPM, Falk #2110GHB1-KD, 4.071:1 ratio, right angle   rfq

Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Fax 503-285-8075) Paul Hansen

958 HP @ 1250 RPM, Falk #2130Y1-LR, 1.83:1 ratio   rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

1000 HP @ 225/450 RPM, Continental, 1.98:1 ratio, roller, Ref.#61658   rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

1000 HP @ 227 RPM, Nuttal, 4.966:1 ratio, roller, Ref.#61657   rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

1000 HP @ 1020 RPM, Falk #1110YF-1LS, 1.019:1 Ratio, parallel, 2.0 SF   Show item detail rfq

Northwest Pulp & Paper Eq Co, Amboy, WA 360-247-5151 (Fax 360-247-6266) Dawn Lingle

1000 HP @ 1750 RPM, Falk #1110YF1-6.2-1 rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

1000 HP @ 1750 RPM, Falk #2205G3B, 73.8.:1 ratio, like new   rfq

Allegheny Gear Boxes, Delmont, PA 800-245-2497 (Fax 724-468-5919) John Wagner

1000 HP @ 1750 RPM, Foote Jones #1803BHE, 38:1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

1000 HP @ 5500 RPM, Lufkin #NM1402C, 6.66:1 ratio, 1.73 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

1040 HP @ 1750 RPM, Falk #2155Y1S, 6.27:1 ratio, 1.68 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

1058 HP @ 5920 RPM, Philadelphia #210-09, 3.33:1 ratio, 1.30 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

1065 HP @ 1750 RPM, Falk #2175YN2S, 25.85:1 ratio, parallel rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

1070 HP @ 1750 RPM, Falk #220Y2S, 11.53:1 ratio, parallel rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

1080 HP @ 1750 RPM, Sumitomo #4060 concentric reducer, 3.26:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

1100 HP @ 720 RPM, Xtek, Size 1209, 9.49:1, 1.5 SF rfq

A G Powell Inc, Allison Park, PA 412-487-9499 (Fax 412-487-9454) Tony Powell

1100 HP @ 720 RPM, Xtek, size 1209, 9.49:1 ratio, 1.5 SF rfq

Lang Machinery Co Inc, Coraopolis, PA 412-262-0999 (Fax 412-262-3406) Charles Lang

1116 HP @ 1750 RPM, Jones #374867-1, 38.75:1 ratio   rfq

Allegheny Gear Boxes, Delmont, PA 800-245-2497 (Fax 724-468-5919) John Wagner

1140 HP @ 1750 RPM, Falk #2145Y1, 7.773:1 ratio, parallel shaft rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

1180 HP @ 1750 RPM, H & S, 5.8:1 ratio, size 1855, par rfq

Power Equipment Co, Rochester, NY 888-666-7771 (Fax 585-436-5578) Al Kempf

1200 HP @ 250/550 RPM, Horsburgh, 1.157:1 ratio, roller, Ref.#60866   rfq

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto

1200 HP @ 1180 RPM, Horsburgh & Scott #240-D, 12.1:1 ratio, parallel rfq

Ace Armature Works, Baton Rouge, LA 225-356-6175 (Fax 225-356-4744) John McCarstle

1225 HP @ 1770 RPM, Lufkin #S-127CH, 2.24:1 ratio, 1.5 SF   rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

1250 HP @ 600 RPM, Lufkin #1810CH, 281 RPM output, size S, 1.53 SF, CW rotation rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

1250 HP @ 1750 RPM, Philadelphia Off-set #226, 9-1, single stage, CW/CCW Rot (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

1250 HP @ 3850 RPM, Lufkin #N1204C, 3.80:1 ratio, 2.15 SF (2) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

1291 HP @ 1750 RPM, Falk #2120Y1LR, 4.619:1 ratio, parallel rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

1312 HP @ 800 RPM, Lufkin #T720DHH, 13.70:1 ratio rfq

J M Machinery Inc, Wadsworth, OH 330-825-2401 (Fax 330-825-0569) Michael Dyer

1315 HP @ 1750 RPM, Falk #2175YN2S, 25.85:1 ratio, parallel   rfq

Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Fax 503-981-3038) John Klistoff

1316 HP @ 1750 RPM, Falk #385A1, parallel shaft, 2.529:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

1332 HP @ 5992 RPM input, Philadelphia #211-09, 3.35:1 ratio, 1.50 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

1368 HP @ 5600 RPM, Lufkin #N290B, 9.35:1 ratio, parrallel reducer rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

1400 HP @ 22300 RPM, Western #3713, 3.4878:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

1426 HP @ 4189 RPM input, Lufkin #NT440, 11.63:1 ratio, 1.75 SF   rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

1500 HP @ 900 RPM, Falk #465A1-CR, 1.818:1 ratio, 495 RPM output rfq

Peak Machinery Inc, Blaine, MN 612-810-1955 () Randy Bayless

1500 HP @ 1170 RPM, Falk #465A1-CR, 3.312:1 ratio, parallel, 2.15 SF   Show item detail rfq

Northwest Pulp & Paper Eq Co, Amboy, WA 360-247-5151 (Fax 360-247-6266) Dawn Lingle

1500 HP @ 1350 RPM, Farrel-Birmingham, 6.74:1 ratio, 200 RPM output, new (3)   rfq

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

1500 HP @ 1750 RPM, Falk #2155YBXU2, 14:1 ratio, 31:1 ratio qty (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

1500 HP @ 1750 RPM, Foote Jones #1902, BHE, 26:1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

1600 HP @ 720 RPM, Hansen #G2-R00J31AS-BND, 28.34:1 ratio, 1.0 SF rfq

RAM Opportunities, Miami, AZ 480-983-0755 (Fax 206-338-3484) Richard Gresham

1600 HP @ 1750 RPM, Link-Belt #4200, 14:1 ratio (2) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

1750 HP @ 1750 RPM, Philadelphia, 165 HP, 18:1 ratio rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

1760 HP, Lufkin #DF510CH-26-2, 14.79:1 ratio, 2 SF   rfq

Weeks Marine Inc, Cranford, NJ 908-272-4010 (Fax 908-272-4740) Vinnie Lynch

1800 HP, Dominion Engineering, Size SI-168-5A, 4.1622:1, Ser.402.628.1, Used Show item detail rfq

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

2000 HP @ 690 RPM, United Engineering, 69.2:1 ratio, 90 tons, like new   rfq

Allegheny Gear Boxes, Delmont, PA 800-245-2497 (Fax 724-468-5919) John Wagner

2000 HP @ 1020 RPM, Falk #1110YF, parallel shaft, 1.019:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

2000 HP @ 1750 RPM, Falk #1090YF1, 1.231:1 ratio rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

2000 HP @ 1750 RPM, Falk #2185Y2, 8:1 ratio (1), 21:1 ratio (2) rebuilt/ ready rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

2000 HP @ 3500 RPM, Philadelphia #95MHS, 1.271:1 ratio rfq

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward

2000 HP @ 5250 RPM input, Western #250HS10, gear reducer,7.29:1 ratio,1.76 SF   rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

2040 HP @ 4844 RPM input, Westinghouse #SU-1610, 2.75:1 ratio, 1.30 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

2200 HP @ 16000/1800 RPM, Westech, gear reducer, 1987 rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

2250 HP @ 6062 RPM input, Lufkin #N1602C, 3.41:1 ratio, 1.83 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

2400 HP @ 4500 RPM input, Elliot #C8R4, Gear Reducer, 4.51:1 ratio, 1.7 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

2406 HP @ 1120 RPM, Falk #1130YFI, 2.206:1 ratio rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

2480 HP @ 1150 RPM, Link-Belt #2000HS, parallel shaft, 2.25:1 ratio rfq

Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Fax 207-946-7513) Pauline Cadrin

2500 HP @ 1750 RPM, Lufkin #SF2210C, 3.66:1 ratio, 1.55 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

2600 HP @ 720 RPM, Hansen #G2-R00J31AS-BND, 17.5:1 ratio, 1.0 SF rfq

RAM Opportunities, Miami, AZ 480-983-0755 (Fax 206-338-3484) Richard Gresham

3000 HP @ 1170 RPM in, Jeffrey Foote-Jones,Fr.2101HLD,2.758:1 ratio,1.25SF,surplus rfq

Salyer Equipment Inc, Broken Arrow, OK 918-486-2660 (Fax 918-486-2349) Bret or Matt

3000 HP @ 4000 RPM input, Westinghouse #SU-3012, 4.00:1 ratio, 1.70 SF (2) rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

3000 HP @ 4500 RPM, Philadelphia #125MHS, 2.52:1 ratio, 1.55 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

3000 HP @ 4500 RPM, Terry #XA, 3.7:1 ratio, 1.8 SF   rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

3000 HP @ 4500 RPM, Terry #XA, 3.7:1 ratio, 1.8 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

3000 HP @ 12845/900 RPM, Falk, gear reducer rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

3300 HP @ 1750 RPM, Falk #2140Y1-LR, 2.488:1 ratio, parallel rfq

Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Fax 503-285-8075) Paul Hansen

3439 HP @ 1750 RPM, Falk #465A1, 3.667:1 ratio, new rfq

B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Fax 313-841-5553) Marc Bekolay

3500 HP @ 4768 RPM, Lufkin #N3004C, Gear Reducer, 6.659:1 Ratio, Unused   Show item detail rfq

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

3560 HP @ 4037 RPM, Westech #4118, 2.27:1 ratio, 1.7 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

4000 HP @ 3162 RPM input, General Electric #S238, 3.52:1 ratio, 1.30 SF rfq

Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Fax 713-464-6319) Bob Gibbs

4000/6400 HP @ 22536/1800 RPM, Cincinnati BHS gear reducer   rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

6705 HP @ 25189/1800 RPM, Philadelphia, gear 10/BHS,13.99:1 ratio, Used rfq

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

13000 HP DeLaval HG Special, 5437/1780 RPM, 3.0545:1 Ratio, Used   rfq

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

14000 HP @ 8600 RPM, Westech #11911, 2.02:1 ratio,4250 rpm out,1.7 SF,unused   rfq

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

20000 HP @ 10957/1800 RPM, Allen, unused 2002 rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

20300 HP @ 5086/3600 RPM, General Electric   rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

20800 HP @ 5000/3000 RPM, General Electric rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

22300 HP @ 5086/3600 RPM, General Electric rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

23000 HP @ 5105/3600 RPM, Prager   rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

33512 HP @ 5059/3000 RPM, Prager   rfq

Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung

1750 RPM, Falk #2120Y1, 7.429:1 ratio rfq

West River Machinery Co., Oakwood, VA 276-259-5353 (Fax 276-259-5252) Joe Street

1750 RPM, SM-Cyclo #VHC3265/19, spd reducer,4731.1 ratio,6-9/16"shaft dia,11.75"lgth rfq

Surplus Solutions Inc - USA, Salisbury, NC 919-585-2512 () Heather Everett

Cotta #GR3200A, 2.18:1 Ratio, 21"rubber block drives, SAE #00 bell housing rfq

Weeks Marine Inc, Cranford, NJ 908-272-4010 (Fax 908-272-4740) Vinnie Lynch

Falk #702-02AS, 7.7:1 ratio rfq

Weeks Marine Inc, Cranford, NJ 908-272-4010 (Fax 908-272-4740) Vinnie Lynch

Joyce #100-V-50-RB2, single shaft gear box & reducer box, item #VFSD18621N, new rfq

Joe Fuller, LLC, Houston, TX 979-277-8343 (Fax 713-956-1332) Joe Fuller

Joyce #D1-100-V-50-RB2, dbl shaft gear box & reducer box, item #VFDF186221N, new rfq

Joe Fuller, LLC, Houston, TX 979-277-8343 (Fax 713-956-1332) Joe Fuller

Magnetorque #215028-1Z7, speed reducer,type 2408A,25 amps,5.1"shaft dia.,6"length rfq

Surplus Solutions Inc - USA, Salisbury, NC 919-585-2512 () Heather Everett

Philadelphia Gr.#1800, 3000:1 ratio,dbl.worm dr,SDUV,370000 torq,unusd,ordr#448066   rfq

M J Lindner Power Equipment, Hemet, CA 951-927-4316 (Fax 951-927-6121) Mike Lindner

Philadelphia Cool Tower CT 3412, 3417, 3418, 3422 Surplus rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

Philadelphia Gear #1800SDUV,3000:1 ratio,dbl.worm dr,ordr#448066,370000 Torque rfq

M J Lindner Power Equipment, Hemet, CA 951-927-4316 (Fax 951-927-6121) Mike Lindner

Rexnord Mars and Mercury assortment (15) rfq

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

Back to Electric & Power equipment listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Copyright © Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise
Privacy Policy
Ariba Logo