PUMPS:
CENTRIFUGALS (Including Boiler Feed Pumps)

CENTRIFUGALS PUMPS - Surplus Record
Flowtronex-The One Stop Pump Shop
There are 1930 listings in this category
File update: Fri, Sep 3, 2010 01:28
Advanced Search
Sort by:
Original Sort
5 GPM @ 30' TDH, CP Pumpen MKPL25-25-160-30-6.29"mag dr.sealless teflon lined imp.pump   
JH Process Equipment, Exton, PA 610-903-0900 (Fax 610-903-0907) Jim Huntsman
10 GPM @ 425' TDH, Aurora, w/20 HP motor, 3/60/440 V., unused (14)  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
15 GPM @ 50' TDH, Caster #MT5002 PVDF, Sealess design, new surplus   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
15 GPM @ 280' TDH, Mabre, 2x3x9 WPV-T, 3560 RPM  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
25 GPM @ 400' TDH, Aurora, 1.5 x 3 x 6, stainless w/20 HP motors, new (5)  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
25 GPM @ 620' TDH, Byron-Jackson, 1.5 x 2.5 x 10-SMI, 2 stage, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
27 GPM @ 485' TDH, Aurora, w/15 HP motor, 3/60/230/460 V., new  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
30 GPM @ 220' TDH, Wilson Snyder #ESN-CL, 1.5x2x8.5,1 stg,3550 RPM,CS/CI,New,#1582  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
30 GPM @ 480' TDH, Aurora, w/10 HP motor, 3/60/230/460 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
40 GPM @ 2075' TDH, Sunflo #P2-GKR, with 75 HP motor, new surplus   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
42 GPM @ 142' TDH, Lawrence #SCP, 1x1.5x6,1 stg.,3600 RPM,304 SS/C.I.,#780/1  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
48.4 GPM @ 114' TDH, Union, 3x4x13 VLK, 1750 RPM  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
48 GPM @ 600' TDH, Aurora, w/25 HP motor, 3/60/230/460 V., new  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
50 GPM @ 75' TDH, Fristam Sanitary #FP712, 316SS, 3 HP @ 3600 RPM, recond.   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
50 GPM @ 260' TDH, Aurora #F6T, w/10 HP, 3/60/208/220/440 V.,(2)  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
50 GPM @ 400' TDH, Goulds, w/15 HP mtr., 3/60/230-460 V., 3600 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
50 GPM @ 435' TDH, Ingersoll-Rand #1"BMFLM, CS/CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
50 GPM @ 462' TDH, Ingersoll-Rand #1"BMFL, 316 SS (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
55/62 GPM @ 240/955 psig, Worthington, 280/440 RPM,10/50 HP mtr.,220/440 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
55 GPM @ 900' TDH, Ingersoll-Rand, w/60 HP motor,1725 RPM,3/60/230-460 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
57 GPM @ 45' TDH, 115/230 V., 225° F., Model 2P436, New  
Electric Motors & Drives Inc, Anderson, SC 864-224-6623 (Fax 864-226-2856) Dave Cothran
57 GPM @ 730' TDH, Ingersoll-Rand #VP, 1,6 stage,3540 RPM,Carbon Steel/CI,#1717  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
58 GPM @ 57' TDH, Afton, 1.5X2 9ILVS, steel, #122/3  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
60 GPM @ 66' TDH, Lawrence #SCP, 1.5x2x6,1 stg,3500 RPM,D.I.,new,#514/#703  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
60 GPM @ 110' TDH, Worthington, w/5 HP motor, 3480 RPM, 3/60/230/460 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
60 GPM @ 768' TDH, Ingersoll-Rand #VP, 1,6 stg,3550 RPM,CS/Cast Iron,#1102  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
61 GPM @ 100' TDH, Bingham #CAD, 1x1.5x6.25, 1 stage, 3560 RPM, C.S., #3082/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
65 GPM @ 30' TDH, Dean Brothers #RA2000,1750RPM(100gpm-100'tdh 3600) hot oil,unused   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
66 GPM @ 122' TDH, Fybroc, const VR-IV, 2x3x10.87, 20 HP, unused  
Jansen Industrial Equipment, Louisville, KY 502-584-3169 (Fax 502-584-0512) Doug Jansen
66 GPM @ 135' TDH, Sundyne #LMV801, steel, #116  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
72 GPM @ 195' TDH, Byron-Jackson #INI, 1x1.5x7.25L,1 stg,3600 RPM,316 SS,new,#1393  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
75 GPM @ 60' TDH, Goulds #3196ST, 1.5 x 3 x 8, DI  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
75 GPM @ 65' TDH, Durco #CD4M, 2 x 1 x 10, (6)  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
75 GPM @ 230' TDH, Ingersoll-Rand #A, 1x8, 1 stg, 3500 RPM, Carbon Steel, #283  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
75 GPM @ 290' TDH, Bingham #CAP, 1x2x9, 1 stg, 3560 RPM, C.S., New, #3931  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
76 GPM @ 510' TDH, Goulds #3735, 1x2x11, 1 stg, Carbon Steel, New, #4221  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
77 GPM @ 269' TDH, Bingham #CAD-L, 1.5x2x8.5, 1 stg, 3560 RPM, C.S., #3081  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
80 GPM @ 80' TDH, Goulds #3196, 316SS, 1 x 1.5 x 6 , used   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
80 GPM @ 128' TDH, Ingersoll-Rand #SHOC, 1.5x1x6, 1 stg, Ductile Iron, #2877  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
80 GPM @ 140' TDH, Carver w/15 HP, 3/60/230-460 V., 3450 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
80 GPM @ 140' TDH, Ingersoll-Rand #A, 1x2x7,1 stg,3500 RPM,C.S./303 SS,#4374/5  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
80 GPM @ 140' TDH, Kontro, sealess HMD 3 x 2.5 CS w/10 HP motor, new surplus   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
80 GPM @ 145' TDH, Ingersoll-Rand #A, 1x7,1 stg,3560 RPM,Carbon Steel,#4559  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
80 GPM @ 145' TDH, Ingersoll-Rand #A, 1x7,1 stg,3550 RPM,Carbon Steel,#4554  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
80 GPM @ 146' TDH, Ingersoll-Rand #A, 1x2x7,1 stg,3500 RPM,C.S./Cast Iron,#987  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
80 GPM @ 146' TDH, Ingersoll-Rand #A, 1x7,1 stg,3500 RPM,316 SS/316 SS,#1266  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
85 GPM @ 117' TDH, Kontro centrifugal pump, 300 psi, 2" x 1.5" x 6", C/S 7.5 HP, #31029  Show item detail 
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Bob Wells
85 GPM @ 117' TDH, Kontro centrifugal pump, 300 psi, 2" x 1.5" x 6", C/S 7.5 HP, #31030  Show item detail 
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Bob Wells
90 GPM @ 54' TDH, Goulds, 3 HP motor, unused, 3/60/230/460 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
92 GPM @ 735' TDH, United #VCMS-H, 1.5,7 stg.,3550 RPM,S-1/C.I.,#1106/08/13  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
95 GPM @ 120' TDH, Union #VCM, 1.5x2x7,1 stage,3600 RPM,Carbon Steel,#1732  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
95 GPM @ 172' TDH, Pacific #SVNC, 1x7,1 stage,3540 RPM,Carbon Steel,#2996  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
97 GPM @ 69' TDH, Goulds, 7.5 HP motor, unused, 3/60/230/460 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
98 GPM @ 693' TDH, Aurora, w/60 HP motor, 3/60/220-460 V., 3600 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
100 GPM @ 50' TDH, Discflo #2015-8-2D, used   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
100 GPM @ 57' TDH, Wilson Snyder #S-100, 2x3x8.5,1 stg,1750 RPM,C.S.,#3153  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
100 GPM @ 60' TDH, Discflow #2015-3, 1.5 x 2-8, unused   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
100 GPM @ 80' TDH, APV centrifugal, 316L S/S, 20 HP, 2.5" x 1.5" x 9", #31068  Show item detail 
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Bob Wells
100 GPM @ 150' TDH, United #VP, 1.5x7, 1 stage, Carbon Steel, #2678  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
100 GPM @ 200'TDH, Fybroc #1500 series, unused   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
100 GPM @ 245' TDH, Ingersoll-Rand #VOC, 2x1.5x8,1 stg,3550 RPM,CF8M,#1734  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
100 GPM @ 245' TDH, Pacific #SVRL, 1x8.5,1 stg,3550 RPM,C.S./Cast Iron,#2347  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
100 GPM @ 282' TDH, United #VP, D-1.5x9L,1 stage,3550 RPM,Carbon Steel,#2683  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
104 GPM @ 170' TDH, United #VP, D-1.5x7L,1 stg,3500 RPM,C.S./Cast Iron,#4435/6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
104 GPM @ 218' TDH, Byron-Jackson #SJA, 1.5x2x8.5L,1 stg,3600 RPM,C.S.,#2789  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
105 GPM @ 275' TDH, Pacific #SVCN-7, 1x8.5,1 stg,3600 RPM,C.S./12 Chr.,new,#1586  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
110 GPM @ 45' TDH FTI #GP11 PVBO1, polyprop.pump,3 HP,3600 RPM,new surplus (2)   
JH Process Equipment, Exton, PA 610-903-0900 (Fax 610-903-0907) Jim Huntsman
110 GPM @ 160' TDH, Union #HHS, 1.5x2x7,1 stg,3550 RPM,CS./Cast Iron,#1587,#1619  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
110 GPM @ 168' TDH, Union #VL, 1.5x2x7, 1 stage, 3500 RPM, 316 SS, #1148  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
110 GPM @ 168' TDH, Union #VL, 1.5x2x7,1 stg,3500 RPM,C.S./Cast Iron,#1363  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
110 GPM @ 1100' TDH, Ing.-Rand #HSP-C5200, 12931 RPM,75 HP Siemens, 1 unused   Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
118 GPM @ 450' TDH, United #TC, 1.5x11,1 stage,3560 RPM,C.S./Cast Iron,#3760  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
120 GPM @ 193' TDH, Ingersoll-Rand #VP, 1.5,7 stg.,3550 RPM,cast iron,#1116  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
120 GPM @ 600' TDH, Ingersoll-Rand #VP, 1.5,3 stg.,3550 RPM,C.S./cast iron,#354  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
120 GPM @ 800' TDH, Pacific #JOMB, 1.5, 4 stg, 3560 RPM, Carbon Steel, #2575  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
122 GPM @ 185' TDH, Union #VCM, 1 stg,3600 RPM,Carbon Steel/ductile Iron,#368  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
125 GPM @ 120' TDH, LaBour, 4 x 3 x 11  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
125 GPM @ 170' TDH, Hayward-Tyler #N3, 2x3x7,1 stg,3500 RPM,316 SS,new,#576  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
125 GPM @ 275' TDH, Union #HHS, 1.5x2x8,1 stg,3550 RPM,C.S./Cast Iron,#1972,#724  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
128 GPM @ 254' TDH, Union #VL, 1.5x2x8.5,1 stg,3550 RPM,CS/CI,#396,#1149,#1155  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
128 GPM @ 275' TDH, Union #HHS, 1.5x2x8A,1 stg,3550 RPM,CS,316 SS,New,#4515-17  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
128 GPM @ 2228' TDH, Bingham, 2 x 4 x 8-3/4A-MSD, 9/8 stage, 316SS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
130 GPM @ 54' TDH, Fristam Sanitary Pump, 316SS, 5 HP @ 1800 RPM, recond.   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
130 GPM @ 54' TDH, Fristam Sanitary Pump, 316SS, 5 HP @ 1800 RPM, recond.   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
130 GPM @ 200' TDH, Durco Mark II, 2x1.5-8,1 stg,3500 RPM,Carbon Steel,New,#2116  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
130 GPM @ 235' TDH, Byron-Jackson #SJA,1.5x2x8.5H,1stg,1770 RPM,CA6NM/303SS,#2810  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
130 GPM @ 235' TDH, Byron-Jackson #SJA, 1.5x2x8H,1 stg,3600 RPM,CS/CI,#1493  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
130 GPM @ 250' TDH, Union #VL, 1.5x2x8.5, 1 stg, 3550 RPM, Carbon Steel, #2110  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
130 GPM @ 566' TDH, Aurora, 2 stg., 3500 RPM, 50 HP, 3/60/230/460 V., new (3)  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
131 GPM @ 260' TDH, Pacific, 1.5X8.5 SVCN, steel, #120/21 (2)  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
135 GPM @ 43' TDH, La Bour #LV-ALS, 3x2-7,1 stg.,1750 RPM,316 SS/316 SS,new,#1422  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
135 GPM, Goulds #3296, 3"x 1.5"x 6" centrifugal pump, 316 S/S, stock #30864  
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Bob Wells
140 GPM @ 64' TDH, Union #HHS, 3x4x8, 1 stage, 1750 RPM, Carbon Steel, #3360  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
140 GPM @ 250' TDH, United #TC, F-1.5x9,1 stg,3500 RPM,Carbon Steel,New,#1875  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
140 GPM @ 250' TDH, United #TC, F-1.5x9,1 stg,3550 RPM,12 Chr./12 Chr.,#1269  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
140 GPM @ 315' TDH, Hayward-Tyler #N3, 1.5x3x10,1 stg.,3500 RPM,304 SS,new,#633  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
140 GPM @ 400' TDH, Bingham #CAD, 1.5x2x10.5,1 stg,3560 RPM,Carbon Steel,#3224  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
145 GPM @ 606' TDH, Ingersoll-Rand #VP, 1.5,3 stg.,3520 RPM,C.S./cast iron,#1718  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
145 GPM @ 1935' TDH, Byron-Jackson #HSO, 10 stg,6800 RPM,Frgd.CS/Bronze,#1394/5  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
149 GPM @ 375' TDH, Union #HHS, 1.5x2x10,1 stage,3500 RPM,316 SS,new,#1987  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 110' TDH, Flowserve #2HPX 13A   
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
150 GPM @ 168' TDH, Ingersoll-Rand #ALC, 1.5x3x7,1 stg,3500 RPM,CS/12 Chr.,#4345  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 168' TDH, Ing.-Rand #ALC, 1.5x3x7,1 stg,3500 RPM,CA-15/12 Chrome,#4346  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 170' TDH, Ingersoll-Rand #AL, 1.5x7, 1 stg, 3550 RPM, CS, #4565/66  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 170' TDH, Ingersoll-Rand #AL, 1.5x7,1 stg,3500 RPM,C.S./C.S.,#4023  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 170' TDH, Ingersoll-Rand #AL, 1.5x7,1 stg,3500 RPM,C.S./Cast Iron,#101  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 170' TDH, Ingersoll-Rand #WL, 1.5x7,1 stg,3550 RPM,C.S./12 Chr.,#4326/7  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 174' TDH, Dean Brothers, w/15 HP motor, 3/60/460 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
150 GPM @ 214' TDH, Wilson Snyder #VIL-BL, 1.5x2x8.5,1 stg,3550 RPM,C.S.,#2702  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 240' TDH, Ingersoll-Rand, w/15 HP mtr., 3/60/220/440 V., 3485 RPM, new  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
150 GPM @ 285' TDH, Bingham #CAD, 1.5x2x8.5, 1 stage, 3560 RPM, #3251  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 285' TDH, Bingham #CAD, 1.5x2x8.5,1 stg,3560 RPM,C.S./Cast Iron,#3252  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 394' TDH, Worthington #WT, 2, 6 stage, Carbon Steel, #2841  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 693' TDH, Ingersoll-Rand, 2 x 12AN  
TK Service Corp, Houston, TX 713-433-4900 (Fax 713-433-6014) Bill Mayfield
150 GPM @ 750' TDH, Pacific #JTC, 1.5,4 stg,3560 RPM,Carbon Steel/Cast Iron,#957  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 1200' TDH, Allis-Chalmers, w/100 HP motor, 3/60/440 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
150 GPM @ 1640' TDH, Pacific #JTC, 1.5, 8 stg, 3560 RPM, Carbon Steel, #3048  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 1800' TDH, Pacific #JTC, 1.5, 8 stage, 3550 RPM, Carbon Steel, #644  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
150 GPM @ 2200' TDH, Pacific #JTC, 1.5,10 stg,3570 RPM,CS/Cast Iron,#1353  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
151 GPM @ 168' TDH, Ingersoll-Rand #ALN, 1.5x7,1 stage,1750 RPM,C.S.,#2818  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
155 GPM @ 225' TDH, Wilson Snyder #ESN-CL,1.5x2x8.5,1 stg,3550RPM,316SS,#2047/9/50/51  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
155 GPM @ 1920' TDH, Pacific #JOMB, 2,8 stg,3560 RPM,CS/Cast Iron,#2418  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
156 GPM @ 1770' TDH, Pacific #JTC, 1.5,8 stg,3560 RPM,CS/12 Chrome,#3987  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
156 GPM @ 1770' TDH, Pacific #JTC, 1.5,8 stg,3560 RPM,Carbon Steel/Cast Iron,#4001  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 95' TDH, CH & E centrifugal trash pump,1-1/8"solids,2"suction   
JH Process Equipment, Exton, PA 610-903-0900 (Fax 610-903-0907) Jim Huntsman
160 GPM @ 130' TDH, Ing.-Rand #VOC, 3x1.5x6,1 stg,3550 RPM,D.I./cast iron,#2466  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 255' TDH, Ingersoll-Rand #AN, 1.5x8,1 stg,1750 RPM,Carbon Steel,#2598  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 280' TDH, United #TC-A, 1.5,1 stg,3530 RPM,Carbon Steel,New,#2457/61/62  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 280' TDH, United #TC-A, 1.5,1 stg,3560 RPM,Carbon Steel,New,#2454  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 380' TDH, Ingersoll-Rand #HOC, 2x1x10,1 stg.,3550 RPM,316 SS,#2805  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 548' TDH, Goulds #3700, 1x2x11C,1 stg,3550 RPM,C.S./Cast Iron,#4357  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 548' TDH, Goulds #3700, 1x2x11C,1 stg,3560 RPM,C.S./Cast Iron,#4358  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 600' TDH, Bingham #CJ, 1.5x3x10.5,2 stg,3550 RPM,carbon steel,#3008  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 900' TDH, Ing.-Rand, GTB3x1.5x11,75 HP mtr,230/460 V.,3550 RPM, new  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
160 GPM @ 1300' TDH, Goulds #3360, 3" 4-stage, CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
160 GPM @ 1320' TDH, Pacific #JTC, 1.5,6 stg,3560 RPM,CS/Cast Iron,#4169  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 1650' TDH, United #BF, 2, 6 stg, 3560 RPM, Carbon Steel, #2514  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 1800' TDH, Ingersoll-Rand #VHTB, 2,12 stg,3550 RPM,S-1/C.I.,#1107/10/11  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 2200' TDH, Pacific #JTC, 1.5,10 stage,3570 RPM,12 Chrome,#1356/7  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 2550' TDH, Ingersoll-Rand #VHTB, 2,17 stg.,3550 RPM,S-1/cast iron,#737  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
160 GPM @ 2550' TDH, Ingersoll-Rand #VHTB, 2, 15 stage, 3550 RPM, #1998  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
165 GPM @ 170' TDH, United #VP, H-1.5x7,1 stg,3500 RPM,C.S./Cast Iron, #927/8  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
165 GPM @ 200' TDH, Bingham #CAP, 2x3x7.5,1 stg,3560 RPM,12 Chrome,#2404  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
165 GPM @ 210' TDH, Bingham #CVA, 2x3x7.5,1 stg,3550 RPM,C.S./Cast Iron,#4469/70  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
165 GPM @ 250' TDH, Hayward-Tyler #N3, 1.5x3x8,1 stg.,3500 RPM,316 SS,new,#568  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
166 GPM @ 258' TDH, Ingersoll-Rand #ATS, 1.5x8,1 stg,2400 RPM,C.S./C.I.,#1376  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
168 GPM @ 158' TDH, Lawrence #SCP, 2x3x14,1 stg.,1750 RPM,304 SS/C.I.,#777/8  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
170 GPM @ 160' TDH, Fybroc, const VR-IV, 2 x 3 x 12.5, 30 HP, unused  
Jansen Industrial Equipment, Louisville, KY 502-584-3169 (Fax 502-584-0512) Doug Jansen
170 GPM @ 215' TDH, Bingham #CAP, 2x3x7.5,1 stg,3600 RPM,Carbon Steel,#1867  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
170 GPM @ 379' TDH, United, V2x13VP, WCB/316SS (4)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
170 GPM @ 915' TDH, Worthington #HNB113, 1.5,2 stg,3550 RPM,C.S.,#2355,#2530  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
175 GPM @ 140' TDH, Durco Mark II, 3x1.5-6,1 stg.,3500 RPM,Alloy 20,new,#2656  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
175 GPM @ 375' TDH, Ingersoll-Rand, 1-1/2 x 3 x 10A  
TK Service Corp, Houston, TX 713-433-4900 (Fax 713-433-6014) Bill Mayfield
178 GPM @ 1225' TDH, Bingham #MSC, 2x3x8.75,5 stg,3560 RPM,Carbon Steel,#4212  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
179 GPM @ 220' TDH, Gould #3700, 2 x 4 x 9, 316LSS   
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
180 GPM @ 114' TDH, Ingersoll-Rand #CNTA, 1.5,8 stg,3555 RPM,CS/CS,#8,#10  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 315' TDH, Bingham #CAP-8, 2x3x9A, 1 stg, 1760 RPM, CA6NM, #4476  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 315' TDH, Bingham #CAP-8, 2x3x9A,1 stg,1760 RPM,CA6NM/CA6NM,#4474/5/7  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 360' TDH, Ingersoll-Rand #A, 1.5x10, 1 stg, 3550 RPM, CS, #4567  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 360' TDH, Ingersoll-Rand #AN, 1.5x10,1 stg,3550 RPM,CS/CI,#4526/27  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 360' TDH, Ingersoll-Rand #AN, 1.5x10, 1 stage, 3550 RPM, #2320  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 700' TDH, Bingham #MSL, 2x3x7,4 stg,3550 RPM,C.S./C.I.,new,#1996  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 850' TDH, Wilson Snyder #ESN, 1.5,2 stg,3550 RPM,C.S./C.I.,#1379/80  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 1050' TDH, Ingersoll-Rand #CNTA, 1.5,6 stg,3550 RPM,CS/Cast Iron,#1573  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 1225' TDH, Bingham #MSC, 2x3x8.75,5 stg,3560 RPM,Carbon Steel,#2089  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
180 GPM @ 1400' TDH, Ingersoll-Rand #CNTA, 1.5,8 stg,3570 RPM,CI/CI,#4015  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
184 GPM @ 1195' TDH, Ingersoll-Rand #2CNT - 6  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
185 GPM @ 870' TDH, Worthington #HNB113, 1.5,2 stg,3550 RPM,carbon steel,#2356  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
188 GPM @ 180' TDH, Goulds #3700, 1.5x3x7,1 stage,3500 RPM,C.S./C.I.,#4330  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
190 GPM @ 306' TDH, United #VP, C-2x9,1 stg,3500 RPM,C.S./Cast Iron,#4434  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
190 GPM @ 840' TDH, Union #MND, 2x3, 4 stg, 3550 RPM, Carbon Steel, #2135  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
190 GPM @ 1266' TDH, Union #MNB, 2x3,8 stg,3600 RPM,CS/12 Chrome,#4328/9  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
190 GPM @ 1688' TDH, Union #MNB, 2x3, 8 stg, 3560 RPM, C.S./C.S., #4125  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
195 GPM @ 700' TDH, Pacific #JOMB, 2, 4 stage, 3560 RPM, Carbon Steel, #958  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
195 GPM @ 1192' TDH, Pacific #JOMB, 2,6 stg,3560 RPM,12 Chrome/12 Chrome,#1352  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
200 GPM @ 80' TDH, Durco #MKII/GII, 3 x 2-10, SS   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
200 GPM @ 100' TDH, Fybroc #FY, 1 1/ 2 x 3 x 6, Unused   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
200 GPM @ 100' TDH, Ingersoll-Rand #3x2x6K, GRP non-metalic, New Surplus   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
200 GPM @ 160' TDH, Ing.-Rand #VOC, 3x1.5x13,1 stg,1750 RPM,Ductile Iron/C.I.,#2432  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
200 GPM @ 175' TDH, Goulds #3196STX, 1.5x3-8,20 HP motor,230/460/3/60,unused  Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
200 GPM @ 310' TDH, United #TC, C-2x9-L,1 stg,3550 RPM,CS,Cast Iron,#1036/37  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
200 GPM @ 840' TDH, Byron-Jackson #GSJA, 1.5x3x10.5H,2 stg,3570 RPM,CS/CI,new,#1803  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
200 GPM @ 900' TDH, Carver, w/100 HP motor, 3/60/460 V., new (4)  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
200 GPM @ 900' TDH, Peerless #2TUT-8 stage  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
200 GPM @ 1175' TDH, Bingham #MSE, 2x4x8.75B,5 stg,3560 RPM,CS/CA6NM,#3151/2  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
200 GPM @ 1280' TDH, Ingersoll-Rand #2"CNTA-6 stage, CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
200 GPM @ 1720' TDH, Ingersoll-Rand #2"CNTA-8 stage, CI (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
200 GPM @ 1900' TDH, Bingham #MSC, 2x3x8.75,8 stage,3560 RPM,12 Chrome,#3852  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
200 GPM @ 2000' TDH, Union, 2x3 MNB (4)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
200 GPM @ 2025' TDH, Bingham #MSE, 2x4x9.75B,8 stg,3550 RPM,12 Chr./12 Chr.,#2134  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
200 GPM @ 5150' TDH, Byron-Jackson 15" HA, Hydropress, 22 stage (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
205 GPM @ 640' TDH, Ingersoll-Rand #CNTA, 1.5,4 stage,3550 RPM, CI/CI,#3579  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
205 GPM @ 1080' TDH, Ingersoll-Rand #CNTA, 1.5,6 stg,3550 RPM,Carbon Steel,#2379  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
205 GPM @ 1400' TDH, Ingersoll-Rand #CNTA, 1.5,8 stg,3550 RPM,C.S./C.I.,#202  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
210 GPM @ 435' TDH, Pacific #SVCN, 1.5x10.5,1 stg,3550 RPM,C.S./C.I.,#4256/7  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
210 GPM @ 435' TDH, Pacific #SVCN, 1.5x10.5,1 stg.,3550 RPM,carbon steel,#4272  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
210 GPM @ 1300' TDH, United #VCMS-L, 3,7 stg.,3550 RPM,S-1/cast iron,#1105  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
210 GPM @ 1650' TDH, United #VMS-L, 3,7 stg.,3550 RPM,C.S./cast iron,#1303  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
210 GPM @ 2000' TDH, Byron-Jackson #DVMX, 3 x 6-9L, 7 stage  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
210 GPM @ 2534' TDH, Bingham #MSD, 3 x 4 x 8-3/4 B, 9-stage  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
214 GPM @ 262' TDH, Ingersoll-Rand #A, 2x8,1 stg,3510 RPM,carbon steel,#3555/6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
215 GPM @ 1490' TDH, Ingersoll-Rand #2"CNTA-6 stage  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
216 GPM @ 262' TDH, Ingersoll-Rand #A, 2x3x8,1 stg,3560 RPM,C.S.,12 chrome,#4376  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
220 GPM @ 65' TDH, Durco #3x2S-10, Alloy D100,7.5 HP,230/460 V.,1745 RPM,(2)    Show Video of Item 
Chad Equipment Ltd, Neilburg, SK 306-823-4561 (Fax 306-823-4569) Chris Barkman
220 GPM @ 118' TDH, Wilson Synder Fig.#4066 4x4-12  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
220 GPM @ 440' TDH, United #TC, 1.5x3x11, 1 stage, 1780 RPM, 316SS, #3034  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
225 GPM @ 70' TDH, Sunds Defibrator #CMD2515, 316 SS   
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
225 GPM @ 134' TDH, Goulds #3996, 1.5x3x13, 1 stg, 1800 RPM, Ductile Iron, #3376  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
225 GPM @ 163' TDH, United, M4x4-13, all 316SS (4)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
228 GPM @ 350' TDH, Pacific #SVS, 1.5x10,1 stage,3525 RPM,Carbon Steel,#1360  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
230 GPM @ 475' TDH, Bingham #CAP, 1.5x3x11.5, 1 stg, 3560 RPM, CS/CI, #386  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
230 GPM @ 490' TDH, Bingham #CAP, 1.5x3x11.5,1 stg.,3560 RPM,C.S./303 SS,#4361  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
230 GPM @ 495' TDH, Bingham #CAP, 1.5x3x11.5, 1 stg, 3560 RPM, CS/CI, #4577  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
230 GPM @ 1848' TDH, Byron-Jackson #DVMX, 3 x 4 x 9B, (2)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
235 GPM @ 275' TDH, Union #VCM, 2x3x9,1 stg,3500 RPM,Carbon Stl./Ductile Iron,#1175  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
235 GPM @ 475' TDH, Byron-Jackson, 2X4X13H SC7, steel, #108/108A (2)  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
235 GPM @ 620' TDH, Afton #ILVS, 2x3-13,1 stg,3600 RPM,C.S./C.I.,#2586  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
237 GPM @ 460' TDH, Afton #ILVS, 1.5x3-11,1 stg,3600 RPM,C.S./D.I.,#1377  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
240 GPM @ 165' TDH, Union #VCM, 2x3x7, 1 stg, 3500 RPM, 316SS/316SS, #1344  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
240 GPM @ 800' TDH, Byron-Jackson #SDMX, 2x3x8,4 stg,4850 RPM,CS/Bronze,#1396/97  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
240 GPM @ 3313' TDH, Ingersoll-Rand, w/400 HP motor, 3/60/460 V., 3600 RPM, 1990  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
245 GPM @ 1120' TDH, Ing.-Rand #VHTM, 2.5,8 stg,3550 RPM,C.S./12 chrome,#1625  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
249 GPM @ 148' TDH, Goulds, 20 HP motor, unused  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
250 GPM @ 70' TDH, Ingersoll-Rand #HOC, 4 x 3 x 8, SS (10)  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
250 GPM @ 77' TDH, Ingersoll-Rand #W, 3x5,1 stg,3550 RPM,C.S./Cast Iron,#4484/5  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 90' TDH, Wilson Synder #ESN-C, 2x3x6,1 stg,3550 RPM,C.S.,new,#2694  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 240' TDH, Ingersoll-Rand #MH, 1.5x8,1 stg,2350 RPM,C.S./C.I.,#1973  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 250' TDH, Ingersoll-Rand #MH, 1.5x8,1 stg,2500 RPM,carbon steel,#1374  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 258' TDH, Afton #MSV, 2x3x20,1 stg,3550 RPM,Cast Iron/Cast Iron,#262/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 310' TDH, Afton #ILVS, 2x3x7,1 stage,3600 RPM,Carbon Steel,#161  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 370' TDH, Bingham #CAD, 2x3x10.5H,1 stg,3530 RPM,carbon steel,#3339  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 370' TDH, Bingham #CAD, 2x3x10.5H,1 stg,3560 RPM,CS,#3433/42  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 450' TDH, Afton #ILVS, 1.5x3-11,1 stg,3600 RPM,carbon steel,#1826  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 450' TDH, Afton #ILVS, 1.5x3x11L,1 stg,3560 RPM,C.S./C.I.,#4010  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 1760' TDH, United #BFH-A, 2, 8 stg, 3550 RPM, C.S./cast iron,#529  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
250 GPM @ 2340' TDH, United #VCMS-L, 3,9 stg.,3550 RPM,S-1/cast iron,#80  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
252 GPM @ 650' TDH, United #TC, L-1.5x13,1 stg,3560 RPM,C.S./C.I.,#4033  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
257 GPM @ 8971' TDH, Bingham, 3x4x8-1/4A-MSD 12 stage, 316 SS, 6200 RPM  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
260 GPM @ 245' TDH, Union #VL, 2x3x8.5,1 stg,3530 RPM,carbon steel,#2105  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
260 GPM @ 260' TDH, Pacific #SVRL, 1.5x8.5,1 stg,3550 RPM,carbon steel,#2346  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
260 GPM @ 2320' TDH, Ingersoll-Rand #CNTA, 1.5,8 stg,3550 RPM,CS/Cast Iron,#203  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
260 GPM @ 5130' TDH, Bingham #HPB, 3x4H,26 stg.,3550 RPM,carbon steel,#2629  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
265 GPM @ 67' TDH, Goulds, 10 HP motor, unused  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
265 GPM @ 160' TDH, Hayward-Tyler #N3, 3x3x7,1 stg.,3500 RPM,316 SS,new,#638  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
265 GPM @ 160' TDH, Union #VL, 2x3x7,1 stage,3500 RPM,C.S./Cast Iron,#186  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
267 GPM @ 4315' TDH, Pacific #2"A-11 stage, double case, CS/CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
268 GPM @ 180' TDH, Union, 3x4x15HTS, API-610 Class A-8, 316SS (2)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
270 GPM @ 860' TDH, Byron-Jackson #SD, 2x3x8.75,4 stg,3560 RPM,CS/Brz,reblt,#2166  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
275 GPM @ 160' TDH, United #VP, 2x7,1 stage,3550 RPM,Carbon Steel,#4487  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
275 GPM @ 245' TDH, Ingersoll-Rand, 2 x 4 x 10A  
TK Service Corp, Houston, TX 713-433-4900 (Fax 713-433-6014) Bill Mayfield
275 GPM @ 380' TDH, Byron-Jackson #SJ, 2x3x10.5H,1 stg,C.S./12 Chrome,#2771  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
275 GPM @ 1750' TDH, Bingham #MSC, 3x4x8.75A,6 stg,3560 RPM,C.S./cast iron,#1887  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
275 GPM @ 2300' TDH, Bingham #MSE, 3x4x8.75B,8 stg,3560 RPM,Carbon Steel,#2384  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
278 GPM @ 2850' TDH, Bingham #MSC, 3x4x8.75,10 stg,3560 RPM,C.S./cast iron,#3016  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
280 GPM @ 200' TDH, Blackmer/Chesteron #LD17, 2x3x10, DI, 20HP pkg,unused   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
280 GPM @ 623' TDH, Goulds #3700, 2x3-13, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
280 GPM @ 700' TDH, Goulds, w/100 HP motor, 3/60/460 V., 3600 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
280 GPM @ 798' TDH, Byron-Jackson, 3 x 4 x 11-5 GSJA, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
280 GPM @ 1350' TDH, Pacific #JTC, 2,6 stage,3550 RPM,C.S./Cast Iron,#863  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
280 GPM @ 1520' TDH, Ingersoll Rand #2-1/2CNTA-6 stage, CS (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
280 GPM @ 2200' TDH, Pacific #JTC, 2,10 stage,3550 RPM,C.S./Cast Iron,#2413  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
285 GPM @ 380' TDH, Hayward-Tyler #N3, 2x3x10,1 stg.,3500 RPM,316 SS,new,#561  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
288 GPM @ 1800' TDH, United, H-3X9 WMSNL, steel, #104/5 (2)  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
290 GPM @ 730' TDH, Bingham #CVA, 2x3x14,1 stg,3560 RPM,Carbon Steel,#4535  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
290 GPM @ 1300' TDH, Pacific #JTC, 2,6 stage,3560 RPM,carbon steel,#4543/4  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
294 GPM @ 1694' TDH, Ingersoll-Rand #2"CNTA-8 stage, CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
295 GPM @ 1637' TDH, Sulzer, 3x6x9F MSD-2, 5 stages, 3560 RPM  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
300 GPM @ 30' TDH, Fybroc #1530, 5 HP, 1800 RPM, unused   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
300 GPM @ 250' TDH, United #VP, 3x9, 1 stage, Carbon Steel, #2681 & 4  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 275' TDH, United #VP, C-3x9 L,1 stg,3550 RPM,C.S./C.I.,#133  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 280' TDH, Ingersoll-Rand #WL, 2x8,1 stg,3600 RPM,C.S./C.I.,#880  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 420' TDH, Union #VCM, 2x3x11, 1 stg, 3500 RPM, Carbon Steel, #391  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 500' TDH, Ingersoll-Rand, feed pump  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
300 GPM @ 960' TDH, Pacific #BFJTC, 2,4 stg,3550 RPM,12 chrome/12 chr.,#3919-22  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 1100' TDH, Ing.-Rand #HA, 3,6 stg.,3550 RPM,S.S.(CA6NM)/S.S.,new,#1139  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 1100' TDH, Ing.-Rand #HA, 3,7 stg.,3550 RPM,S.S.(CA6NM)/S.S.,#1137  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 1100' TDH, Ing.-Rand #HA, 3,7 stg.,3550 RPM,S.S.(CA6NM)/S.S.,new,#1138  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 1100' TDH, Ingersoll-Rand #HA, 3,7 stage,3550 RPM,304 S.S.,#1136  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 1180' TDH, Byron-Jackson #GSMH, 2x4x13-L,2 stg,3550 RPM,C.S./C.I.,#451  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 1250' TDH, Pacific #AC, 2, 6 stg,3560 RPM,11-13 chrome/11-13 chr.,#1221  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 1610' TDH, Byron-Jackson #SDMX, 3x4x7.5,3550 RPM,carbon steel,#3240  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 1760' TDH, Bingham #MSD, 3x4x8.25,8 stg,3560 RPM,C.S./12 chrome,#4027  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 2025' TDH, Bingham #MSD,3X4X8.25A,9 stg,5k RPM,12 Chr/12 Chr,new,#2567  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 2640' TDH, Bingham #MSD, 3x4x8.25A,12 stg,3560 RPM,CS/12 Chr.,#4529  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 2640' TDH, Bingham #MSD, 3x4x8.25A,12 stg,5960 RPM,316SS/316SS,#4223  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 2640' TDH, Bingham #MSD, 3x4x8.25A,12 stg,3560 RPM,CS/Bronze,#3761/2  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 2650' TDH, Ingersoll-Rand, feed pump, new  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
300 GPM @ 2950' TDH, United #WMSN-L, C-3x9,10 stg,3560 RPM,12 chrome,#3885  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 3600' TDH, United #WMSN-L, C-3x9,12 stg,3560 RPM,316 SS/316 SS,#4065  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
300 GPM @ 4700' TDH, Pacific, 2" Z-13 stg., steel, 3750# HT  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
305 GPM @ 112' TDH, Union #VCM, 3x4x11,1 stg,1750 RPM,Carbon Steel/316 SS,#4472  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
305 GPM @ 420' TDH, Union #VCM, 2x3x11,1 stg,3560 RPM,Carbon Steel/C.I.#4012  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
305 GPM @ 910' TDH, Byron-Jackson #GSJH, 2x3x11.5,2 stg,3550 RPM,C.S./C.I.,#4408/9  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
310 GPM @ 1880' TDH, Ingersoll-Rand #2CNTA, 8 stage, 3750 RPM (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
315 GPM @ 285' TDH, United #TC-A, 2,1 stg,3560 RPM,Carbon Steel,new,#2444-60  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
317 GPM @ 875' TDH, Byron-Jackson #DVMX, 3x4x9A,3550 RPM,Carbon Steel,#3312  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 400' TDH, Pacific #SPCN, 2x10.5,1 stg,3550 RPM,C.S.,#2423/5/6/8  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 555' TDH, Pacific #SVC, 1.5L,1 stg,3560 RPM,C.S./Cast Iron,#725,#852  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 555' TDH, Pacific #SVC, 1.5L,1 stage,3560 RPM,Carbon Steel,#4165  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 900' TDH, Byron-Jackson #GSJ, 2x3x11.5,2 stg,3550 RPM,CS/CI,#1870/71  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 955' TDH, Union, 3x4MOB, 3 stage, 304SS, rebuilt  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
320 GPM @ 1600' TDH, I-R #CNTA, 2,8 stg,3560 RPM,CI,#574,#2362,#2468/9,#2740  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 2100' TDH, Pacific #WB, 2x16,10 stg,3550 RPM,C.S./Cast Iron,#1302/04  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 2260' TDH, Bingham #MSE, 3x4x8.75B,8 stg,carbon steel/12 chrome,#4458  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 2850' TDH, Bingham #MSE, 3x4x8.75B,10 stg,4000 RPM,C.S.,#4583  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 2850' TDH, Bingham #MSE, 3x4x8.75B,10 stg,4430 RPM,C.S.,#4584  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
320 GPM @ 2850' TDH, Bingham #MSE, 3x4x8.75B,10 stg,4000 RPM,C.S./C.I.,#4582  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 95' TDH, Fristam Sanitary #FP3551, 316SS, 15 HP @ 1800 RPM, recond.   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
325 GPM @ 95' TDH, Fristam Sanitary #FP3551, 316SS, 15 HP @ 1800 RPM, recond.   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
325 GPM @ 208' TDH, Byron-Jackson #SCE, 3x4x8L,1 stg,3k RPM,C.S.,new,#4151  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 510' TDH, Pacific #SV, 1.5-L,1 stg,2440 RPM,carbon steel,#1204  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 705' TDH, Afton #ILVS, 2x3x13,1 stg,3550 RPM,C.S./Ni-resist,#4404  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 910' TDH, Ingersoll-Rand #CGT, 2,2 stg,3550 RPM,C.S./cast iron,#1391  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 1600' TDH, Ingersoll-Rand #CNTA, 2,8 stg,3560 RPM,C.S./Cast Iron,#1650/1  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 2250' TDH, Bingham #MSC, 3X4X8.75B, 8 stg,C, 12 Chr,used,#3933  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 2550' TDH, Bingham #MSC, 3x4x8.75B,9 stg,3560 RPM,C.S./bronze,#3971  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 2570' TDH, Ingersoll-Rand #DA, 3x8,10 stg,3900 RPM,Carbon Steel,#1231  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 2850' TDH, Bingham #MSC, 3x4x8.75B,10 stg,C.S./cast iron,#4382  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
325 GPM @ 2850' TDH, Bingham #MSC, 3x4x8.75B,10 stg,3560 RPM,C.S.,#4383  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
326 GPM @ 1550' TDH, Ingersoll-Rand, 3x10-DA, 5 stage, 316 SS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
330 GPM @ 1705' TDH, Ingersoll-Rand #CNT, 2,8 stg,3550 RPM,carbon steel,#415  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
330 GPM @ 1705' TDH, Ing.-Rand #CNT, 2,8 stg,3560 RPM,cast iron/cast iron,#302  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
330 GPM @ 2350' TDH, Bingham #MSD, 3x4x8.25A,10 stage,6000 RPM,316 SS,#2169  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
335 GPM @ 319' TDH, Bingham #CAP-8, 2x4x9,1 stg,3560 RPM,CA6NM/CA6NM,#4478-81  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
335 GPM @ 1600' TDH, Ing.-Rand #CNTA, 2,8 stg,3550 RPM,cast iron/cast iron,#242  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
340 GPM @ 185' TDH, Afton #ILVS, 2x3x7H,1 stg,3560 RPM,C.S./C.I.,#4008  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
340 GPM @ 185' TDH, Afton #ILVS, 2x3x7H,1 stg,3560 RPM,carbon steel,#4009  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
340 GPM @ 275' TDH, Goulds #3736, 3x4x9,1 stg,3550 RPM,C.S./C.I.,new,#614  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
340 GPM @ 275' TDH, Goulds #3736, 1.5x4-13,1 stg,3550 RPM,C.S./C.I.,#1670/1  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
340 GPM @ 1400' TDH, Pacific #ATB, 2, 2 stg, 3550 RPM, C.S./cast iron, #239  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
340 GPM @ 5000' TDH, Pacific #I, 2, 13 stg, 3580 RPM, Carbon Steel, #2504  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
343 GPM @ 2880' TDH, Bingham, 3x6x9F MSD, 8 stages, 3560 RPM  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
350 GPM @ 100' TDH, Goulds #3196 MTX, 3x4x7, SS (4)  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
350 GPM @ 160' TDH, Ingersoll-Rand #A, 3x4x7,1 stg,3500 RPM,C.S./12 chrome,#4369  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
350 GPM @ 160' TDH, Ingersoll-Rand #AC, 3x4x7,1 stg,3550 RPM,carbon steel,#2635  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
350 GPM @ 208' TDH, Goulds #3196MT, 3 x 2 x 10, 316 SS  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
350 GPM @ 336 psi, Worthington #3LR-9, w/motor, unused  
Arzillo Industries Inc., Suffolk, VA 757-925-3788 (Fax 757-925-3789) James Arzillo
350 GPM @ 600' TDH, Goulds #3736, 1.5x4-13,1 stg,1800 RPM,CS/Cast Iron,#2410/11  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
350 GPM @ 1245' TDH, Union #HOS, 3x4x13,2 stg,3550 RPM,316 SS/316 SS,New,#2976  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
350 GPM @ 1510' TDH, Byron-Jackson #SDMX, 3x4x7.5,6 stg,3550 RPM,C.S./C.I.,#1966  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
350 GPM @ 1510' TDH, Bryon-Jackson #SDMX, 3x4x7.5,6 stg,3550 RPM,C.S./Brz,#1967  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
350 GPM @ 2000' TDH, Goulds #3365, 3", 8 stg, 3550 RPM, cast iron, #2965  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
350 GPM @ 2600' TDH, Goulds #3365, 3", 8 stg, 2550 RPM, cast iron, #2964  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
350 GPM @ 3340' TDH, Byron-Jackson #15HHH, Hydropress, 20 stage (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
355 GPM @ 176' TDH, Goulds #3700, 2x4x7,1 stg,3560 RPM,Carbon Steel,#3830,#3905  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
360 GPM @ 155' TDH, Aurora, 25 HP Marathon Motor, 284 Fr.HPV, See Pictures   
Z & R Electric Service, Iron Mountain, MI 800-562-7105 (Fax906-774-9060) Rick Bieti
360 GPM @ 160' TDH, Pacific #SEC, 3X, 1 stage, 3550 RPM, Carbon Steel, #1538  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
360 GPM @ 645' TDH, Union #VLK-8, 2x3x13,1 stg,3550 RPM,carbon steel,#4441  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
360 GPM @ 650' TDH, Union #HHS, 2x3,1 stage,3500 RPM,Carbon Steel,#3222  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
360 GPM @ 2638' TDH, Byron-Jackson #DVMX, 3x4x9B,8 stg,3937 RPM,C.S./Brz,#532  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
365 GPM @ 640' TDH, Union #VL, 2x3x13,1 stage,3550 RPM,C.S./C.I.,#4353/4  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
365 GPM @ 1300' TDH, Worthington, 3x4,3 stg,3550 RPM,Alloy 20/Alloy 20,#2325  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
368 GPM @ 401' TDH, Bingham #JCV, 2x3x12/2, 3560 RPM, 316 SS, #2587  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
375 GPM @ 450' TDH, Ingersoll-Rand, 2 x 4 x 12A  
TK Service Corp, Houston, TX 713-433-4900 (Fax 713-433-6014) Bill Mayfield
375 GPM @ 1100' TDH, Pacific #ROV, 2, 2 stage, 3570 RPM, 316 SS, #2353  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
378 GPM @ 177' TDH, Lawrence #SCP, 3x4x9,1 stg,3600 RPM,304 SS/C.I.,#779  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
378 GPM @ 475' TDH, Bingham #CAP, 2x4x11.5,1 stg,3560 RPM,carbon steel,#3155  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
380 GPM @ 470' TDH, Bingham #CVA, 2x4x11,1 stg,1760 RPM,C.S./C.I.,#2948  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
380 GPM @ 474' TDH, Bingham #CAP, 2x4x11.5, 1 stg, 3560 RPM, 316 SS, #4502  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
382 GPM @ 375' TDH, Pacific #SVCN-7, 2x10.5,1 stg,3550 RPM,316 SS/316 SS,#4340/1  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 50' TDH, Carver #KWP-Z65-200, 3x2.5,1 stg,1800 RPM,ductile iron,new,#1101  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 52' TDH, Carver #KWP465-200, 3x2.5-8,1 stg,1800 RPM,D.I.,new,#594/5  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 65' TDH, Durco, 4 x 3 x 10, alloy 20  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
400 GPM @ 67' TDH, United, W4x9VP, 316SS (4)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
400 GPM @ 250' TDH, Wilson Snyder #ESN-T, 3x4x8.5,1 stg,3550 RPM,C.S.,#3223  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 260' TDH, Ingersoll-Rand #W, 3x8,1 stg,3600 RPM,C.S./cast iron,#166  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 350' TDH, Bingham #CAD, 3x4x10.5,1 stg,3560 RPM,Carbon Steel,#3334  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 400' TDH, Chesterton, 3 x 2 x 10, 316 SS, used  
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
400 GPM @ 500' TDH, Goulds #3700, 2x4x11,1 stg,1750 RPM,CS/12 Chr.,#3461/62  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 580' TDH, Ingersoll-Rand #A, 2x4x12, 1 stg, 3550 RPM, CS/CI, #3973  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 1195' TDH, Ingersoll-Rand #CNT, 2.5,6 stg,3560 RPM,carbon steel,#2103  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 1200' TDH, Bingham #MSB, 3x4x9,4 stg,3550 RPM,Carbon Steel,new,#1562  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 1200' TDH, Goulds #3360, 3" 4-stage  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
400 GPM @ 1210' TDH, Bingham #MSB, 3x4x9-H,4 stg,3570 RPM,C.S./cast iron,#32  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 1294' TDH, Ingersoll-Rand, 3 x 9, CS, 5 stages, new  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
400 GPM @ 1300' TDH, Byron-Jackson #GSMH, 2x4x13,2 stg,3560 RPM,CF8M/C.I.,#1709  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 1350' TDH, Ingersoll-Rand #CTA, size 2-1/2, 6 stage  
Salyer Equipment Inc, Broken Arrow, OK 918-486-2660 (Fax 918-486-2349) Bret or Matt
400 GPM @ 1400' TDH, Byron-Jackson, 2x4x9, 2 stage, carbon steel, #3181  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 1400' TDH, Byron-Jackson #SM, 2x4x9,2 stage,carbon steel,#3180  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 1500' TDH, Ingersoll-Rand #2-1/2 CNT -6  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
400 GPM @ 1560' TDH, Pacific #JTC, size 2.5, 4-6 stg, S6 const., new  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
400 GPM @ 2170' TDH, United #WMSN-L, 3x9-H,7 stg,3550 RPM,C.S./Cast Iron,#418  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 2200' TDH, Bingham #MSB, 3x4x9,7 stg,3560 RPM,C.S./cast iron,#2558/9  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 2430' TDH, Bingham #MSB, 3x4x9,8 stg,3570 RPM,S-1/cast iron,#1223/4  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 2600' TDH, Ingersoll-Rand #HMTA, 2,10 stg,3560 RPM,Carbon Steel,#1679  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
400 GPM @ 4875' TDH, Bingham #MSD, 3x6x9F,13 stage,3560 RPM,316 SS,#3740  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
405 GPM @ 256' TDH, Ingersoll-Rand #AT, 3x8,1 stg,3560 RPM,Carbon Steel,#4575  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
405 GPM @ 260' TDH, Ingersoll-Rand #A, 3x4x8,1 stg,3560 RPM,CS/12 Chrome,#2766  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
409 GPM @ 184' TDH, Goulds, 40 HP motor, unused  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
410 GPM @ 580' TDH, Ingersoll-Rand #A, 2x12, 1 stg, 3550 RPM, CS, #4568-70  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
410 GPM @ 1450' TDH, Pacific #JTC, 2.5,6 stg,3550 RPM,12 chrome/12 chrome,#4304/05  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
410 GPM @ 1650' TDH, Bingham #MSD, 3x6x9A,5 stg,3560 RPM,C.S./Bronze,#4072  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 1450' TDH, Pacific #JTC, 2.5,6 stg,3550 RPM,C.S./12 chrome,rebuilt,#4579  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 1450' TDH, Pacific #JTC, 2.5,6 stg,3560 RPM,carbon steel/cast iron,#3865  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 1450' TDH, Pacific #JTC, 2.5,6 stg,3560 RPM,C.S./12 chrome,#4096  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 1450' TDH, Pacific #JTC, 2, 6 stg, 3560 RPM, carbon steel, #4208  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 1450' TDH, Pacific #JTC, 2.5,6 stg,3560 RPM,5 chrome/C.S.,#4129  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 1450' TDH, Pacific #JTC, 2.5,6 stg,3550 RPM,12 Chr./12 Chr.,#4332  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 1450' TDH, Pacific #JTC, 2.5,6 stg,3600 RPM,12 Chr./12 Chr.,#4331  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 1900' TDH, Pacific #JTC, 2.5,8 stg,3560 RPM,carbon steel/cast iron,#4042  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 2025' TDH, Pacific #A, 2.5S,8 stg,Carbon Steel/Carbon Steel,#2900  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
415 GPM @ 2640' TDH, Pacific #Z, 2.5S, 8 stage, Carbon Steel, #2901  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
420 GPM @ 200' TDH, Bingham #CAD, 3x4x7.5,1 stg,3560 RPM,316 SS/316 SS,new,#2617  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
420 GPM @ 5500' TDH, Pacific #ZTB, 2.5S, 15 stage, Carbon Steel, #2858  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
425 GPM @ 25' TDH, Bell & Gossett, 3/60/240-480 V., 1750 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
425 GPM @ 2119' TDH, Coffin type DE, 533 psi,538°F,35 psi exh.,348 HP,unused  
MC Marine, Jersey City, NJ 201-433-0870 (Fax 201-433-9287) Mike Nahon
425 GPM @ 2340' TDH, Ingersoll-Rand #HMTA, 2,9 stg,3550 RPM,C.S./C.I.,#4488/9  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
425 GPM @ 2400' TDH, Pacific #JTC, 2.5, 10 stg, carbon steel.cast iron, #4390/1  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
425 GPM @ 2400' TDH, Pacific #JTC, 2.5,10 stg,3570 RPM,carbon steel,#3835/6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
425 GPM @ 2400' TDH, Pacific #JTC, 2.5,10 stg,3570 RPM,C.S./C.S.,#3834  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
430 GPM @ 382' TDH, Pacific #SPM, 3x10.5S,1 stg,3570 RPM,C.S./C.I.,#937  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
430 GPM @ 400' TDH, Union #VL, 2x3x10,1 stg,3600 RPM,C.S./C.I.,#135  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
430 GPM @ 725' TDH, Ingersoll-Rand, 3X13S SVCN, steel, #109/10 (2)  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
430 GPM @ 880' TDH, United #THF, S-2x12,2 stg,3550 RPM,Carbon Steel,#2524  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
432 GPM @ 2370' TDH, Ingersoll-Rand #4RTS-6, Multistage Horizontal Split Case Pump  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
435 GPM @ 1060' TDH, Pacific #JTC, 2.5,4 stg,4200 RPM,C.S./C.S.,#4130  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
435 GPM @ 1850' TDH, Pacific #JTC, 2.5, 6 stg, 3550 RPM, C.S./Cast Iron, #1247  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
435 GPM @ 2120' TDH, Pacific #JTC, 2.5, 8 stg, 3570 RPM, C.S./Cast Iron, #1817/8  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
438 GPM @ 1560' TDH, Goulds #3360, 4"-6 stage, CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
440 GPM @ 219' TDH, United, 4 x 6-16VP, 316SS (4)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
440 GPM @ 219' TDH, United, 4x6x16 VP, 1750 RPM  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
440 GPM @ 337' TDH, Worthington #4LRN-10, stainless w/75 HP 440V. motor, new (2)  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
440 GPM @ 1500' TDH, Pacific #JTC, 2.5, 6 stage, 3600 RPM, Carbon Steel, #2357  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
440 GPM @ 2120' TDH, Pacific #BFJTC, 2.5,8 stg,3560 RPM,C.S./Cast Iron,#2311/13  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
440 GPM @ 2120' TDH, Pacific #BFJTC, 2.5, 8 stg, 3560 RPM, Carbon Steel, #2315  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
440 GPM @ 2120' TDH, Pacific #JTC, 2.5,8 stg,3560 RPM,C.S./cast iron,#2185/86  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
440 GPM @ 2480' TDH, Pacific, 2.5" JTC-10 stage, steel case  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
440 GPM @ 3650' TDH, Pacific #JTC, 2.5,12 stage,3580 RPM,316 SS/316 SS,#1986  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
448 GPM @ 459' TDH, Goulds, 3X6 11N 3700, steel, #114/15 (2)  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
450 GPM @ 62.3' TDH, Durco #3x4x10H, matl. D3, w/motor, new surplus   
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
450 GPM @ 140' TDH, Union #VL, 3x4x7, 1 stage, 3550 RPM, carbon steel, #743  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 140' TDH, United #VP, K-3x7,1 stg,3550 RPM,C.S./C.I.,#281 & #339  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 165' TDH, Ingersoll-Rand #WL, 3x7,1 stg,3600 RPM,C.S./C.I.,#1398  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 175' TDH, Afton #ILVS, 3x4x8,1 stg,3600 RPM,C.S./C.I.,#534  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 180' TDH, Goulds #3196MT, 3 x 4 8G, SS  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
450 GPM @ 185' TDH, Bingham #CVA, 3x4x7.5,1 stg,3560 RPM,CS/CI,#1179/80,#841  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 190' TDH, Bingham #CVA, 3x4x7.5,1 stg,3550 RPM,CS/Ni-Resist,#4486  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 219' TDH, Peerless #E, 4x3x8.5,1 stg,3500 RPM,cast iron,#3225  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 240' TDH, Pacific #SVC, 3x4x8,1 stg,3550 RPM,Carbon Steel,#1929  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 250' TDH, Ingersoll-Rand, 4X6X8A, A-line, steel, #112  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
450 GPM @ 250' TDH, Pacific #SVCN, 3x8.5S,1 stg,3550 RPM,CS/Cast Iron,#188  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 250' TDH, Pacific #SVCN-7, 3x8.5S,1 stg,3600 RPM,C.S./12 chrome,new,#1583  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 302' TDH, Union #SDV, 3x6x8.5, 1 stg, 3550 RPM, CS/CI, #97  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 350 TDH, Goulds #3196, 2x3x10, 316SS, used (4)   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
450 GPM @ 550' TDH, Ingersoll-Rand #HOC, 3x1.5x13,1 stg,3550 RPM,316 SS,#2803  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 600' TDH, United #TC, V-2X13,1 stage,3560 RPM,C.S./Cast Iron,#3759  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 629' TDH, Bingham, 3X4X14 CAP, steel, #117  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
450 GPM @ 1260' TDH, United #THF, 2x13,2 stg,3560 RPM,12 Chrome/12 Chr,#500  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 1360' TDH, Ingersoll-Rand #CNTA, 2.5,6 stg,3500 RPM,CI/CI,#2009/11  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 1560' TDH, Pacific #JTC, 2.5,6 stg,3550 RPM,carbon steel,#2707  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 1560' TDH, Pacific #JTC, 2.5,8 stage,3570 RPM,C.S./Cast Iron,#2762  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 1560' TDH, Pacific #JTC, 2.5,4 stage,3560 RPM,Carbon Steel,#3047  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 1771' TDH, Ing.-Rand #DA5, size 3x10, 5-stage, 3550 RPM, unused  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
450 GPM @ 1800' TDH, Ingersoll-Rand #CNTA, 2.5,8 stage,3550 RPM,Cast Iron,#1389  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 1800' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3560 RPM,Carbon Steel,#2121  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
450 GPM @ 2310' TDH, Goulds #3360, 4" 8-stage, CI/BRZ (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
455 GPM @ 165' TDH, Ingersoll-Rand #AL, 3x4x7,1 stg,3520 RPM,CS/12 Chr.,#170  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
458 GPM @ 164' TDH, Ingersoll-Rand #ALS, 3x7,1 stg,3520 RPM,CS/Cast Iron,#430  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
460 GPM @ 1348' TDH, Ingersoll-Rand, #3 CNT-6 (3)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
470 GPM @ 136' TDH, Union #HHS, 3x4x7, 1 stg, 3550 RPM, CS/12 Chrome, #855  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
470 GPM @ 244' TDH, Union #HHS, 3x4x8,1 stg,3550 RPM,CS/Cast Iron,#4462  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
470 GPM @ 561' TDH, Ingersoll-Rand #HFL, 3,1 stage,3550 RPM,Bronze,#2613/14  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
475 GPM @ 134' TDH, Union #VL, 3x4x7,1 stg,3550 RPM,C.S./C.I.,#742,#1368/70  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
475 GPM @ 134' TDH, Union #VL, 3x4x7,1 stg,3600 RPM,Carbon Steel,#1715/23/36  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
475 GPM @ 160' TDH, Goulds #3736, 3X4-7, 1 stg.,3500 RPM,316 SS/316 SS, #1546  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
475 GPM @ 160' TDH, Goulds #3736, 3X4-7,1 stg., 3550 RPM,316 SS/316 SS, #1424  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
475 GPM @ 200' TDH, Bep Burks #T3400G9-3F-AB, 3x4,Marathon 40 HP,unused   Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
475 GPM @ 950' TDH, Bingham #MSB, 4x4x8.5,4 stg,3550 RPM,carbon steel,#2414-17  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
479 GPM @ 80' TDH, Goulds, 15 HP motor, unused  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
480 GPM @ 670' TDH, Ingersoll-Rand #CJV, 2,1 stage,3540 RPM,Carbon Steel,#2042  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
480 GPM @ 960' TDH, Worthington #UNQ-8, 3,4 stg,3550 RPM,carbon steel,#2535/36  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
480 GPM, Ingersoll-Rand, 3" x 4" x 12", 316/SS (2), Item 289-P10A   
Midwest Steel Co, Houston, TX 713-991-7843 (Fax 713-991-4745) Sales Dept.
487 GPM @ 4007' TDH, Ingersoll-Rand #3"CHTA-10 stage, double case, CS/CHR (3)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
490 GPM @ 275' TDH, Union #VCM, 3x4x9,1 stg,3500 RPM,Carbon Steel/Cast Iron,#4514  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
490 GPM @ 1950' TDH, Union #MOD, 3x4, 6 stage, 3560 RPM, #2070  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
490 GPM @ 1950' TDH, Union #MOD, 3x4,5 stage,3550 RPM,CF8M/316 SS,#2126  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
498 GPM @ 860' TDH, Byron-Jackson, 3x4x11-1/2-SM 2 stage, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
500 GPM @ 60' TDH, Goulds #3135, 4x12x14  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
500 GPM @ 70 psi Self priming make: MPI diesel, skid mouted  
Mid-Atlantic Engine Supply Co, Cinnaminson, NJ 856-829-7798 (Fax 856-829-6248) Al Cook
500 GPM @ 90' TDH, Durco #MK III, 4 x 3 x 10US, 316 SS  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
500 GPM @ 100 psi, Peerless Fire Pump  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
500 GPM @ 120' TDH, Crane Pump,MO#4021HD,w/25 HP motor @ 3600,TEFC (2)  
Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris
500 GPM @ 175' TDH, United #VIP, M-3x7,1 stage,3500 RPM,C.S./C.I.,#1187/8  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 275' TDH, Union #VCM, 3x4x9,1 stg,3500 RPM,Carbon Steel/Cast Iron,#389  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 275' TDH, Union #VCM, 3x4x9,1 stg,3500 RPM,Carbon Steel,#2532/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 275' TDH, United #VIP, H-3x9,1 stg,3500 RPM,C.S./C.I.,#1569/75  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 300 TDH, Goulds #3196, 3x4x8, 316SS, used (2)   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
500 GPM @ 395' TDH, Ingersoll-Rand #A, 3x4x10,1 stg,3550 RPM,Carbon Steel,#3174  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 400' TDH, Ingersoll-Rand #A, 3x12,1 stg,3600 RPM,Carbon Steel,#3520  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 400' TDH, Ingersoll-Rand #A, 3x10, 1 stg, 3500 RPM, CS/CS, #437  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 700' TDH, Pacific #JOMB, 4,2 stg,3560 RPM,carbon steel,#2392  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 700' TDH, Pacific #JOMB, 4,6 stg,3560 RPM,carbon steel,#2390  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1290' TDH, Ing.-Rand #CNTA, 2.5,6 stg,3500 RPM,CI,#2018,#2321,#2969  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1290' TDH, Ingersoll-Rand #CNTA, 2.5,6 stg,3500 RPM,C.I/C.I.,#2014/15  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1290' TDH, Ingersoll-Rand #CNTA, 2.5,6 stg,3500 RPM,cast iron,#2013/16  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1290' TDH, Ingersoll-Rand #CNTA, 2.5,6 stg,3560 RPM,cast iron,#2017  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1320' TDH, Ingersoll-Rand #CNTA, 2.5,6 stg,3560 RPM,cast iron,#3784  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1640' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3560 RPM,cast iron,#2222  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1640' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3550 RPM,cast iron,#2223  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1640' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3600 RPM,carbon steel,#2360  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1650' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3560 RPM,Carbon Steel,#2393  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1670' TDH, Ingersoll-Rand #CTNA, size 2-1/2, 8 stage  
Salyer Equipment Inc, Broken Arrow, OK 918-486-2660 (Fax 918-486-2349) Bret or Matt
500 GPM @ 1710' TDH, Bingham #MSD, 3x6x9E,5 stg,3560 RPM,12 chrome/12 chrome,#4028  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1720' TDH, Ingersoll-Rand #CNTA, 2,8 stage,4500 RPM,Cast Iron,#2031  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1760' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3570 RPM,12 chrome,#3635  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1760' TDH, Ing.-Rand #CNTA, 2.5,8 stg,3560 RPM,5 Chr/5 Chr,#4178/80/81  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1800' TDH, Pacific #JOMB, 4,2 stg,3560 RPM,carbon steel,#2391  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1800' TDH, Pacific #JOMB, 4,6 stg,3560 RPM,carbon steel,#2389  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 1880' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3560 RPM,C.S./cast iron,#19  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 2700' TDH, Ingersoll-Rand, 3 x 10 DA, 8 stage, 11-13% chrome steel  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
500 GPM @ 2780' TDH, Union #MOD, 3x4,9 stg,3550 RPM,carbon steel,#2294  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 2780' TDH, Union #MOD, 3x4,9 stg,3550 RPM,12 chrome/316 SS,#2071  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 3096' TDH, Bingham #MSD, 3x6x9E,9 stg,3560 RPM,carbon steel,#2281  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 3096' TDH, Bingham #MSD, 3x6x9E,9 stg,3560 RPM,C.S./12 chrome,#2282  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
500 GPM @ 3460' TDH, Ingersoll-Rand, 4 x 10 NH-10 stage, new  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
500 GPM @ 4485' TDH, Bingham #MSD, 3x6x9E,13 stg,3560 RPM,carbon steel,#4581  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
510 GPM @ 298' TDH, Goulds #3910S, 2x4-9,1 stg,3560 RPM,carbon steel,#4176  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
510 GPM @ 990' TDH, Bingham #CMA, 3x6x13.5,2 stg,3550 RPM,12 chrome/12 chrome,#2038  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
515 GPM @ 465' TDH, Bingham #CAP, 3x4x11.5,1 stg,3560 RPM,CS/CI,#4038,#4464  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
515 GPM @ 465' TDH, Bingham #CAP8,3x4x11.5,1 stg,3560 RPM,CA6NM/CA6NM,#4482/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
518 GPM @ 462' TDH, Bingham #CVA, 3x4x11.5A,1 stg,3560 RPM,C.S./C.I.,#4427  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
520 GPM @ 125' TDH, Worthington #CNG-104, 3,1 stg,1750 RPM,Alloy 20/Alloy 20,#2291  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
520 GPM @ 290' TDH, Goulds #3900, 2x4-9,1 stg,3600 RPM,carbon steel,#2937  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
520 GPM @ 383' TDH, Bingham #CAD, 3x4x10.5,1 stg,3550 RPM,C.S./Cast Iron,#4465/66  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
520 GPM @ 386' TDH, Bingham #CAD, 3x4x10.5,1 stg,3550 RPM,C.S./12 Chrome,#4496  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
520 GPM @ 810' TDH, United #TC, 2x15, 1 stage, 3560 RPM, Monel 400, #4143  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
520 GPM @ 2055' TDH, Byron-Jackson, 3 x 6 x 9-DVMX, 7-stage, steel  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
520 GPM @ 2070' TDH, Ingersoll-Rand #HMTA, 3,6 stg,3950 RPM,C.S./C.I.,#1743/44  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
521 GPM @ 2420' TDH, Bingham, 3 x 6 x 9C MSD-8,steel,#101/2 (2)  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
525 GPM @ 760' TDH, Byron-Jackson #TGSM, 3x4x11.5,2 stg,3570 RPM,316 SS/316 SS,#1219  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
525 GPM @ 790 psig, Worthington #4UNBS10,350BHP,Terry turbine 580 psig,rebuilt   Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
525 GPM @ 800' TDH, Gould, w/200 HP motor, 460 V, 3550 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
525 GPM @ 990' TDH, Byron-Jackson #GSJH, 3x4x11.5,2 stg,3550 RPM,CA-15/12 chrome,#751  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
525 GPM @ 1770' TDH, Ingersoll-Rand #4"RTS-6 stage, CI/CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
525 GPM @ 2475' TDH, United #BFH-A, 3x4,8 stg,3550 RPM,carbon steel,#3079  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
530 GPM @ 375' TDH, Ingersoll-Rand #AC, 3x4x10,1 stage,CS/Cast Iron,#4370  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
530 GPM @ 813' TDH, Ingersoll-Rand #4"CGT-2 stage, CS/CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
535 GPM @ 1600' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3550 RPM,C.S./cast iron,#4459  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
535 GPM @ 1600' TDH, Ingersoll-Rand #CNTA, 2.5,8 stg,3560 RPM,C.S./cast iron,#4461  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
535 GPM @ 4375' TDH, Sulzer Bingham #3X4X8.25A-MSD, 7 & 8-stg, (4) available  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
535 GPM @ 10140' TDH, Bingham #HPB, 3x4H,26 stg.,carbon steel/bronze,#2705  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
540 GPM @ 65' TDH, Durco, 4x3us-10H  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
540 GPM @ 450' TDH, Wilson Snyder #ESN-L, 3x4x10.5,1 stg,3600 RPM,CS/CI,#941  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
548 GPM @ 600' D, Byron Jackson #SJA, 3x4x13.25L,1 stg,3570 RPM,CS/CI,#2706  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 130' TDH, Bingham #CAD, 3x4x6.25,1 stg,3560 RPM,C.S./C.I.,#1945  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 150' TDH, Union #VL, 4x6x13,1 stg,3600 RPM,C.S./C.I.,#2859  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 600' TDH, Ingersoll-Rand #A, 3x12,1 stg,3600 RPM,Carbon Steel,#3520  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 600' TDH, Ingersoll-Rand #A, 3x4x12,1 stg,3560 RPM,CS/CS,#3764  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 950' TDH, Bingham #MSB, 3x4x10,3 stg,3560 RPM,C.S./cast iron,#488  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 1200' TDH, Byron-Jackson #OL, 4x6,4 stg,carbon steel/cast iron,#3188  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 1200' TDH, Byron-Jackson #OL, 4x6,4 stage,carbon steel,#3187  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 1600' TDH, Byron-Jackson #DVMX, 3x4x9D,6 stg,3550 RPM,C.S./C.S.,#1860  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 1725' TDH, Bingham #MSB, 3x4x10,5 stg,3560 RPM,carbon steel,#533  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 2200' TDH, United #WMSN-M, S-3x9,8 stg,3575 RPM,12 Chr./12 Chr.,#2608  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 2500' TDH, Byron-Jackson #DVMX, 3x3x9D HP,10 stg,6200 RPM,316 SS,#1823  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 2800' TDH, Bryon-Jackson #RBMX, 4x6S-6,6 stg,3550 RPM,C.S./C.I.,#1554  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 3400' TDH, Worthington #WT, 3",10 stg,3560 RPM,Carbon Steel,#4214  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
550 GPM @ 4402' TDH, Ingersoll-Rand 3 x 10 DA-5 stage, 6000 RPM, 316 SS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
560 GPM @ 1370' TDH, Ingersoll-Rand #DA, 3x10,6 stg,3560 RPM,CS/12 Chr.,#3313  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
560 GPM @ 1725' TDH, Ingersoll-Rand #DA, 3x10,5 stg,3560 RPM,316 SS/CS,#2863/64  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
560 GPM @ 1925' TDH, Bingham pump, 3 x 6 x 9C MSD, 6 stage  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
560 GPM @ 2850' TDH, Byron-Jackson #DVMX, 3x6x9E,9 stg,4450 RPM,CA6NM/12 chrome,#3257  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
560 GPM @ 4116' TDH, Ing.-Rand #D, 3x10,12 stg,3550 RPM,12 Chr/12 Chr,#4587/8  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
568 GPM @ 329' TDH, Pacific, 3X10.5 SVCN-1, steel, #118  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
568 GPM @ 500' TDH, Ingersoll-Rand, 3X12A, A-line, steel, #119  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
570 GPM @ 1450' TDH, Bingham #MSD, 4x6x9B,5 stg,2250 RPM,carbon steel,new,#2820  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
572 GPM @ 2866' TDH, Bingham, 3x6x9C-MSD 9 stage, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
572 GPM @ 4592' TDH, Bingham #MSD, 3x6x10A,12 stg,4170 RPM,316 SS,#4450  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
575 GPM @ 92' TDH, Bingham, 3X6X9 CAP, steel, #113  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
575 GPM @ 940' TDH, United #TSHO, 3x4x12,2 stg,3550 RPM,12 chrome,new,#4308  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
580 GPM @ 290' TDH, Peerless #DM, 3x4x10,1 stg,3500 RPM,316 SS/316 SS,#2288  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
580 GPM @ 2240' TDH, Byron-Jackson #RBMX, 4x6-6,6 stg,3550 RPM,C.S./C.I.,#1693  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
580 GPM @ 2240' TDH, Byron-Jackson #RBMX, 4x6-6,6 stg,3600 RPM,C.I./C.I.,#2000  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
580 GPM @ 2240' TDH, Byron-Jackson #RBMX, 4x6-6,6 stg,3560 RPM,cast iron,#1999  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
585 GPM @ 350' TDH, La Bour #LV-ALS, 4x3-10,1 stg,3500 RPM,316 SS/316 SS,#573  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
585 GPM @ 1500' TDH, Byron-Jackson #OLMX, 4x6,4 stg,3600 RPM,C.S.,#2855/56  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
598 GPM @ 1490' TDH, Bingham #MSB, 3x4x10,4 stg,3560 RPM,Carbon Steel,#3329/64  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 84' TDH, Goulds #3735, 4 x 6, w/20 HP, TEFC, 1800 RPM (8)  
Doug Beat Co The, Toledo, OH 419-841-3881 (Fax 419-841-3914) Doug/ Chris
600 GPM @ 86' TDH, Goulds, 6" x 4" x 10", DI, Item 354-P1945   
Midwest Steel Co, Houston, TX 713-991-7843 (Fax 713-991-4745) Sales Dept.
600 GPM @ 200' TDH, 4 x 8AN, DI  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
600 GPM @ 224' TDH, Goulds, w/50 hp motor, 3/50/230 or 460 V., unused, 1 ea.   
Arzillo Industries Inc., Suffolk, VA 757-925-3788 (Fax 757-925-3789) James Arzillo
600 GPM @ 250' TDH, Dean Brothers #PH231, 316SS, unused   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
600 GPM @ 255' TDH, Ingersoll-Rand, 4X6X8A, A-line, steel, #111  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
600 GPM @ 650' TDH, Ingersoll-Rand #GTR, 3, 2 stage, 3550 RPM, 304 SS, #1678  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 800' TDH, Pacific #JTC, 3,4 stg,3600 RPM,carbon steel/cast iron,#740  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 930' TDH, Ingersoll-Rand, 4GTR-2 stage, 316SS (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
600 GPM @ 1100' TDH, Ingersoll-Rand #DA, 3x10,4 stg,3560 RPM,C.S./12 Chr.,#2652/53  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 1200' TDH, Pacific #JTC, 3,6 stage,3560 RPM,CS/CI,#2087,#2088,#4025  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 1200' TDH, Pacific #JTC, 3,6 stg,3560 RPM,C.S./12 Chrome,#4388/89  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 1467' TDH, Bingham #MSB, 4x6x10-HT,4 stg,3560 RPM,C.S./cast iron,#505  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 1467' TDH, Bingham #MSB, 4x6x10-HT,2 stg,3560 RPM,C.S./cast iron,#486  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 1700' TDH, Byron-Jackson #RBMX, 4x6S-6,6 stg,3600 RPM,carbon steel,#1790  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 1865' TDH, Ingersoll-Rand #3"CNTA-8 stage, CI/CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
600 GPM @ 2000' TDH, Worthington #UX-1, 4,6 stg,3280 RPM,C.S./12 chrome,#1549  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 2220' TDH, Bingham #MSB, 3x4x10,6 stg,3600 RPM,Carbon Steel,#3670/71  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 2240' TDH, Bingham #MSB, 3x4x10,6 stg,3560 RPM,carbon steel,#3088  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 2240' TDH, Bingham #MSB, 3x4x10,5 stg,3570 RPM,C.S./cast iron,#1664  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 2240' TDH, Bingham #MSB, 3x4x10, 6 stage, Carbon Steel, #3327  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 3000' TDH, Bingham #MSB, 3x4x10,8 stg,3560 RPM,C.S./bronze,#4251  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
600 GPM @ 3000' TDH, Bingham #MSB, 3x4x10,8 stg,3600 RPM,316 SS/12 chrome,#1742  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
605 GPM @ 820' TDH, Ingersoll-Rand #CNTA, 3,4 stg,3560 RPM,carbon steel,#3359  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
607 GPM @ 286' TDH, Goulds #3736, 3x4-11, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
610 GPM @ 320' TDH, United #TC, S-3x9,1 stage,3500 RPM,Carbon Steel,#599  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
615 GPM @ 950' TDH, Ingersoll-Rand #EGT, 3,2 stg,3550 RPM,C.S./cast iron,#837  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
620 GPM @ 325' TDH, United #TC-TS, S-3X9,1 stg,3550 RPM,C.S./Cast Iron,#1530  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
620 GPM @ 330' TDH, Ingersoll-Rand #H, 4x3x9,1 stg,3550 RPM,new,#3497-9,#3505  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
620 GPM @ 2900' TDH, Byron-Jackson #RBMX, 4x6,6 stg,3560 RPM,12 chrome,#2988-90  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
625 GPM @ 820' TDH, United #TC, N-3x15-13,1 stg,3570 RPM,Carbon Steel,#2674  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
625 GPM @ 820' TDH, United #TC, N-3X15, 1 stg, 3570 RPM, CS/Cast Iron, #179  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
630 GPM @ 225' TDH, Ingersoll-Rand #SFL, 4,1 stg,3550 RPM,Carbon Steel,#2947  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
630 GPM @ 225' TDH, Ingersoll-Rand #SFL, 4,1 stage,3530 RPM,Bronze,#2611  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
630 GPM @ 6690' TDH, Byron-Jackson #HSO, 3x10,14 stg,2920 RPM,C.S./bronze,#1747  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
631 GPM @ 280' TDH, Flowserve 4HPX18A, C6 materials, 1770 RPM, New surplus  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
640 GPM @ 2080' TDH, Pacific #JTC, 3,8 stg,3560 RPM,carbon steel/cast iron,#4128  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
640 GPM @ 2750' TDH, Pacific #JTC, 3, 10 stage, 3570 RPM, Carbon Steel, #244  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
643 GPM @ 1385' TDH, Ingersoll-Rand #7V3, 5.25x7,3 stg,279 RPM,Al BZ,#2302/3/5/6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
650 GPM @ 60' TDH, Durco #MKII/GII, 3x4-10H, SS (14)   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
650 GPM @ 600' TDH, Ingersoll-Rand #GTR, 3,2 stg,3550 RPM,304 SS/304 SS,#2651  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
650 GPM @ 1190' TDH, Goulds #3360, 4,4 stg,3550 RPM,cast iron/bronze,#3281  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
650 GPM @ 1250' TDH, Byron-Jackson #DVMX, 3x6x9E,4 stg,3560 RPM,carbon steel,#4225  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
650 GPM @ 1520' TDH, Byron-Jackson #DVMX, 3x6x9E,5 stg,3550 RPM,12 Chr.,rblt,#1690  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
650 GPM @ 1650' TDH, Bingham, 3X6X9C, MSD, 6-stage, chrome, #140  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
650 GPM @ 2400' TDH, Pacific #JTC, 3,10 stg,3570 RPM,carbon steel,#551  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
650 GPM @ 2750' TDH, Bingham #MSB, 4x6x10,8 stg,3560 RPM,C.S./cast iron,#1024  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
650 GPM @ 2850' TDH, Byron-Jackson #DVMX, 3x6x9E,9 stage,Carbon Steel,#3258  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
650 GPM @ 3150' TDH, Byron-Jackson #DVMX, 3x6x9E,9 stg,3937 RPM,12 Chr./Bronze,#512  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
670 GPM @ 2867' TDH, Coffin, #DEB16, steam turbine driven   
U S Combustion Products Inc, Ketchum, ID 208-788-9367 (Fax208-788-9368) S.Backstatter
671 GPM @ 110' TDH, Goulds, 40 HP motor, unused  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
674 GPM @ 2700' TDH, Worthington #4WTF-126, 6 stage, chrome  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
675 GPM @ 165' TDH, Bingham #CVA, 4x6x7.5L,1 stg,3560 RPM,CS/Cast Iron,#4250  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
680 GPM @ 680' TDH, Wilson Snyder #ESN, 3x4x13,1 stg,3550 RPM,C.S./C.S.,#1522  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
680 GPM @ 930' TDH, Bingham #MSD, 3x6x9C,3 stg,3560 RPM,C.S./cast iron,#479  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
680 GPM @ 2000' TDH, United #4DDHF, 6 stg, 11-13%  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
690 GPM @ 980' TDH, Wilson #ESN,3x4x16,1 stg,3550 RPM,CS/12 Chr,new,#3966/7  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
690 GPM @ 1860' TDH, Bingham #MSD, 3x4x9C,6 stg,3560 RPM,C.S./cast iron,#4198  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
695 GPM @ 1240' TDH, Bingham #MSD-D, 4x6x9,4 stg,3560 RPM,carbon steel,#3029  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
695 GPM @ 2149' TDH, Bingham #MSD, 3x4x9C,7 stg,3550 RPM,CA-15/12 chrome,#4540-2  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
695 GPM @ 2149' TDH, Bingham #MSD, 3x6x9C,7 stg,3560 RPM,carbon steel,#4117  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
697 GPM @ 4400' TDH, Aldrich #9V5, 4.25x9,5 stg,225 RPM,C.S./ceramic,#3024/25  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 95' TDH, Hayward Tyler #BH3, 4x612N3, unused  
Park Corporation, Pasco, WA 509-547-9929 (Fax 509-547-9356) Mike Christianson
700 GPM @ 240' TDH, Allweiler #65-200/02, CI, New Surplus   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
700 GPM @ 255' TDH, Ingersoll-Rand #A, 4x8,1 stg,3535 RPM,CS/Cast iron, #85  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 255' TDH, Ingersoll-Rand #A, 4x8,1 stg,3550 RPM,Carbon Steel,#3044  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 255' TDH, Ingersoll-Rand #AS, 4x8,1 stg,3550 RPM,CS/Cast Iron,#685  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 280' TDH, Bingham #CVA, 3x4x9,1 stg,1760 RPM,carbon steel,#2581  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 290' TDH, Bingham #CVA, 3x4x9,1 stg,1750 RPM,C.S./Cast Iron,#1623  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 290' TDH, Bingham #CVA, 3x4x9,1 stg,3560 RPM,CS/Cast Iron,#981  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 620' TDH, Union #HHS, 3x4x13A,1 stg,3550 RPM,CS/12 Chrome,New,#4520/1  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 960' TDH, Ingersoll-Rand #CNTA, 3,4 stage,3550 RPM,cast iron,#18  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1200' TDH, Bingham #CKM, 3x4x12,2 stg,3560 RPM,12 chrome/12 chrome,#2552  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1250' TDH, Bingham #MSD-D, 4x6x9-C,4 stg,3560 RPM,5 & 12 chrome,#116  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1515' TDH, United #WMSN-H, V-3x9,5 stg,3560 RPM,C.S./Cast Iron,#4004/05  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1550' TDH, Bingham #MSD-D, 4x6x9-C,5 stg,6000 RPM,CS/12 Chr.,#1400  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1830' TDH, United #WMSN-H, W-3x9,8 stg,3560 RPM,C.S./cast iron,#3750  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1920' TDH, Ing.-Rand #CNTA, 3,8 stg,3550 RPM,5 Chrome/5 Chrome,#4333  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1920' TDH, Ingersoll-Rand #CNTA, 3,8 stg,3550 RPM,carbon steel,#4191  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1920' TDH, Ingersoll-Rand #CNTA, 3,8 stg,3550 RPM,cast iron/bronze,#2972  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1920' TDH, Ingersoll-Rand #CNTA, 3,8 stage,2560 RPM,cast iron,#2224  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 1970' TDH, Bingham, 4 x 6-11MSB, 5-stage  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
700 GPM @ 2440' TDH, United #MSNH, 3x9-W,8 stage,3560 RPM,316 SS,#1514  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
700 GPM @ 4100' TDH, Ingersoll-Rand #CHTA, 3,10 stg,3560 RPM,C.S./C.S.,#235  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
710 GPM @ 600' TDH, United #TC, M-3x13,1 stg,3570 RPM,Carbon Steel,new,#3053  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
710 GPM @ 600' TDH, United #TC, M-3x13,1 stg,3550 RPM,C.S./12 Chrome,#4365  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
710 GPM @ 1375' TDH, Ingersoll-Rand #HMTA, 4,5 stg,3400 RPM,Carbon Steel,#3632  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
720 GPM @ 870' TDH, Pacific #CTVB, 3,2 stg,3550 RPM,carbon steel/cast iron,#962  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
725 GPM @ 1500' TDH, Ingersoll-Rand #DA, 3x10,5 stg,4070 RPM,carbon steel,#2155  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
725 GPM @ 1860' TDH, Goulds #3300, 3x6x9,6 stg,3570 RPM,Carbon Steel,#3193  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
725 GPM @ 3600' TDH, Ingersoll-Rand #DA, 3x10,12 stg,1780 RPM,C.S./12 Chr.,#3698  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
730 GPM @ 1100' TDH, Goulds #3360, 4"-6 stage, CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
730 GPM @ 4400' TDH, United #3x9WMSNH, 14 stages  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
734 GPM @ 1049' TDH, Union #6X6X13.5VLK, 75 HP, 1770 RPM, 230/460 V. (2)   
Chad Equipment Ltd, Neilburg, SK 306-823-4561 (Fax 306-823-4569) Chris Barkman
735 GPM @ 630' TDH, Afton #ILVS, 3x4x13, 1 stg, 1780 RPM, CS/Ni-Resist, #4405  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 57' TDH, Durco #Mark II, 6 x 4 x 13A  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
750 GPM @ 125 psig, Worthington #4LG10, bronze,3550 RPM, turbine dr, 1 unused   Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
750 GPM @ 132' TDH, Bell & Gossett, 4x5,40HP,C.I.,brnz.fitted,460/3/60(2)unused  Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
750 GPM @ 250' TDH, Ingersoll-Rand #API-610-C6, 4 x 11AH, (3)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
750 GPM @ 255' TDH, Ingersoll-Rand #AC, 4x6x8,1 stg,3550 RPM,CS/12-Chr,#4111/2  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 255' TDH, Ingersoll-Rand #AC, 4x6x8, 1 stg, 3550 RPM, CS, #4562  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 255' TDH, Ingersoll-Rand #AC, 4x6x8, 1 stg, 3560 RPM, CS, #4561  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 280' TDH, Ingersoll-Rand #MFLA,4, 1 stage,3900 RPM,Cast Iron,#2709  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 290' TDH, Bingham #CVA, 3x4x9,1 stg,1760 RPM,Carbon Steel,#2235  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 425' TDH, Pacific #SEC, 3L,1 stage,3550 RPM,CS/Red Brass,#2052/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 460' TDH, Ingersoll-Rand #4GTS  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
750 GPM @ 640' TDH, Goulds #3390, 4"L-2 stage, CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
750 GPM @ 730' TDH, Bingham #CAD, 3x4x14,1 stg,3560 RPM,12 chrome/12 chr,#3437  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 815' TDH, Ingersoll-Rand #GT, 3,2 stage,Cast Iron/Bronze,#3191  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 815' TDH, Ingersoll-Rand #GT, 3,2 stage,3560 RPM,C.I./Bronze,#4046-8  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
750 GPM @ 3575' TDH, United #WMSN-H, Y-3x9,11 stg,3550 RPM,carbon steel,#1447  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
755 GPM @ 255' TDH, Ing.-Rand #A, 4x6x8,1 stg,3550 RPM,12 chrome/12 chr,#3965  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
755 GPM @ 258' TDH, Ingersoll-Rand #A, 4x6x8,1 stg,3550 RPM,C.S./12 chrome,#4366  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
760 GPM @ 2296' TDH, United #WMSN-H, 3x9,7 stg,3560 RPM,CF8M/316 SS,#1906  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
765 GPM @ 126' TDH, United #VP, H-4x7,1 stg,3525 RPM,C.S./12 Chrome,#4506-08  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
770 GPM @ 334' TDH, Bingham, 3" x 6" x 11.5", CS (2), Item 401-P107B   
Midwest Steel Co, Houston, TX 713-991-7843 (Fax 713-991-4745) Sales Dept.
775 GPM @ 83' TDH, Peerless #AM, F1040,1 stg,1800 RPM,cast iron/cast iron,#782/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
775 GPM @ 1930' TDH, Byron-Jackson #DVMX, 4x6x9B,6 stg,3560 RPM,C.S.,#2326  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
775 GPM @ 1950' TDH, United #WMSN-H, Y-3x9,6 stage,3550 RPM,Bronze,#2068/69  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
780 GPM @ 460' TDH, Goulds #3700, 3x6x11, 1 stage, 3560 RPM, #4075-8  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
780 GPM @ 460' TDH, Goulds #3700, 3X6X11,1 stg, 3560 RPM, Ferallium, #4074  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
780 GPM @ 550' TDH, United #TC, S-3x13,1 stg,3550 RPM,Carbon Steel,#3789  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
787 GPM @ 2590' TDH, Bingham pump, 4 x 6 x 10B MSD, 9 stage  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
790 GPM @ 1265' TDH, Goulds #3360, 6X8, 4-Stage Pump (2) available  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
800 GPM @ 85' TDH, Union #VCM, 4X6X11, 1 Stg., 1750 RPM, 316SS/Cast Iron, #1142  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 112' TDH, Durco, 6 x 4-13A  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
800 GPM @ 160' TDH, Sykes,25'auto self prime,dry run,Deutz diesel dr.,trailer mtd.  
Mid-Atlantic Engine Supply Co, Cinnaminson, NJ 856-829-7798 (Fax 856-829-6248) Al Cook
800 GPM @ 210' TDH, Bingham #CAD, 4x6x8.5L, 1 stg, 3560 RPM, CS, #3338  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 240' TDH, Union #HTS, 4x6x8.5,1 stg,3550 RPM,C.S./Cast Iron,#96  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 325' TDH, Blackmer/Chesterton, 3x4x10, DI, unused   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
800 GPM @ 1000' TDH, United #THF, 4, 2 stage, carbon steel, #2690/700  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 1400' TDH, Pacific #I, 4S,4 stage,carbon steel/cast iron,#1120  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 1400' TDH, United #WMSN-H, Z-3x9,4 stg,3560 RPM,carbon steel,#3205  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 1500' TDH, Worthington #UNQ-11, 4,4 stg,3550 RPM,316 SS/Alloy 20,#3598  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 2100' TDH, United #WMSN-H, Z-3x9,6 stg,3560 RPM,carbon steel,#3093  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 3150' TDH, United #WMSN-H, Z-3x9,6 stg,3560 RPM,C.S./cast iron,#3096  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 3750' TDH, Pacific #I, 4S,10 stage,carbon steel/12 chrome,#2899  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
800 GPM @ 6500' TDH, Bingham #CP, 4x6-9E, 8-stage, 11-13% (2)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
800 GPM @ 6900' TDH, United, F4x14MSNDL, 12 stage, 401SS, new (5)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
800 GPM @ 7300' TDH, Bingham, 3x6-9C, 316SS, 5500 RPM, new  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
810 GPM @ 210' TDH, Bingham #CAD, 3x6x8.5L, 1 stage, carbon steel, #3436  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
813 GPM @ 372' TDH, Bingham, 3" x 6" x 11", CS (2), Item 401-P203B  
Midwest Steel Co, Houston, TX 713-991-7843 (Fax 713-991-4745) Sales Dept.
818 GPM @ 2749/3940' TDH, J.S. Coffin #DEB-16, 840 psig, 670/921 HP (5)  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
820 GPM @ 80' TDH, Sulzer-Bingham, 6X6X8CV, w/75 HP Vert.Elec.Motor  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
820 GPM @ 310' TDH, Goulds #3700, 3x6x9,1 stg,3560 RPM,Carbon Steel,#4168  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
820 GPM @ 310' TDH, Goulds #3700, 3x6x9,1 stage, 1750 RPM, C.S./C.S., #4278/9  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
824 GPM @ 156' TDH, Ingersoll-Rand #AL, 4x7,1 stg,3530 RPM,C.S./cast iron,#714  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
824 GPM @ 156' TDH, Ingersoll-Rand #ALS, 4x7,1 stg,3530 RPM,C.S./C.I.,#366,#463  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
825 GPM @ 630' TDH, Pacific #SVCN, 3x13,1 stg,3550 RPM,12 Chr./12.Chr,#4298  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
826 GPM @ 5200' TDH, Sulzer-Bingham, 4X6X10.5B-MSB, 11-Stage Pump  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
830 GPM @ 1625' TDH, Byron-Jackson, 4x6x10L DVMX, 5 stages, 3575 RPM  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
830 GPM @ 2360' TDH, Bingham CP 4 x 6 x 11, reconditioned  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
832 GPM @ 4207' TDH, Pacific #IJ, 4,6 stg,3560 RPM,carbon steel/carbon steel,#1643  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
833 GPM @ 450' TDH, Flowserve #2K4X3-13RV M3ST,Reliance,150hp,460/3/60,unused   Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
835 GPM @ 2220' TDH, Bingham 4 x 6 x 11-CP, 11-13% chrome  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
840 GPM @ 132' TDH, Worthington #CNG-104, 4,1 stg,1750 RPM,Alloy 20/Alloy 20,#1763  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
840 GPM @ 132' TDH, Worthington #CNG-104A, 4,1 stg,1750 RPM,Alloy 20/Alloy 20,#1764  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
842 GPM @ 2250' TDH, Byron-Jackson #DVMX, 4x6x9D,6 stg,4400 RPM,12 Chr/12 Chr,#2192  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
842 GPM @ 2285' TDH, Byron-Jackson #DVMX, 4x6x9D,6 stg,6200 RPM,316 SS,#2193  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
842 GPM @ 2285' TDH, Byron-Jackson #DVMX, 4x6x9D,6 stg,6200 RPM,C.S.,#2200  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 96' TDH, Bingham #CAD, 6 x 8-11.5L, 11-13% (2)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
850 GPM @ 200' TDH, United #ANLV, 4x7,1 stg,3550 RPM,CS/Cast Iron,#422  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 225' TDH, Union #V, 4x6x8.5,1 stg,3550 RPM,CS/Cast Iron,#1592  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 225' TDH, Union #VL, 4x6x8.5,1 stg,3550 RPM,Alloy 20/Alloy 20,#1361  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 225' TDH, Union #VL, 4x6x8.5,1 stg,3550 RPM,CS/Cast Iron,#4448/9  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 225' TDH, Union #VLK-BB, 4x6x8.5,1 stg,3550 RPM,CS/Cast Iron,#4288  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 225' TDH, Union #VLK-BB, 4x6x8.5,1 stg,3550 RPM,Carbon Steel,#4289  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 225' TDH, Union #VTK, 4x6x8.5,1 stage,3550 RPM,CS/Cast Iron,#344  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 226' TDH, Union #HHLS-C, 4x6x8.5,1 stage,3550 RPM,C.S./Cast Iron,#95  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 226' TDH, Union #HLS-C, 4x6x8.5,1 stg,3550 RPM,C.S./cast iron,#94  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 290' TDH, Goulds #3316, Imp.dia.13.25", DI  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
850 GPM @ 360' TDH, Union #HHS, 4x6x10,1 stg,3560 RPM,Carbon Steel,#3794  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 360' TDH, Union #HHS, 4x6x10,1 stg,3550 RPM,C.S./cast iron,#4367  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
850 GPM @ 540' TDH, Byron-Jackson #HHS, 4X6X12.5,1 Stg.,3550 RPM,#3236  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
860 GPM @ 365' TDH, Union #VL, 4x6x10,1 stage,3560 RPM,carbon steel,#4007  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
870 GPM @ 1150' TDH, Byron-Jackson, 4X6OLMX, 3-Stage, 3550 RPM Pump  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
875 GPM @ 175 TDH, Goulds #3405, Size 4x6-17 SS  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
875 GPM @ 185' TDH, Bingham #CVA, 4x6x7.5,1 stg,3560 RPM,CS/12 Chr,surp,#4522  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
875 GPM @ 185' TDH, Bingham #CVA, 4x6x7.5,1 stg,3560 RPM,CS,new surplus,#2523  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
875 GPM @ 700' TDH, Byron-Jackson, 4x6x13-1/4H-SM, CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
875 GPM @ 1150' TDH, United #TCM, C-4x13,2 stg,3550 RPM,carbon steel,#2691  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
875 GPM @ 1150' TDH, United #TCM, C-4x13,2 stg,3600 RPM,C.S./cast iron,#1213  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
875 GPM @ 1240' TDH, United #BFHA, 4,4 stage,3560 RPM,CS/Cast Iron,#959  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
875 GPM @ 1700' TDH, Union #4X6MPD, 5 stage, M-pump stainless, #139  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
875 GPM @ 2480' TDH, Pacific #JTC, 4X,8 stg,3550 RPM,C.S./Cast Iron,#4460  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
875 GPM @ 2480' TDH, Pacific #JTC, 4X,8 stg,3550 RPM,CA-15/CA-15,#4467/68  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
875 GPM @ 2618' TDH, Byron-Jackson #DVMX, 4x6x9D,7 stg,3550 RPM,C.S./12 Chr,#960  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
875 GPM @ 2750' TDH, Bingham #MSB, 4x6x10.5,7 stg,3560 RPM,C.S./bronze,#1666  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
880 GPM @ 130' TDH, Worthington #CNG-104, 4,1 stg,1750 RPM,Alloy 20/Alloy 20,#1770  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
880 GPM @ 235' TDH, Union #VL, 4x6x8,1 stage,3600 RPM,Carbon Steel,#1738  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
880 GPM @ 1700' TDH, Ing.-Rand #HMTA, 4,5 stg,4220 RPM,CS/Cast Iron,#3528  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
880 GPM @ 1700' TDH, Ingersoll-Rand #HMTA, 4,5 stage,4220 RPM,CS/CS,#3529  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
890 GPM @ 2480' TDH, Bingham #MSD, 3x4x9C,8 stg,3560 RPM,C.S./C.S.,#3310  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 40' TDH, Ingersoll-Rand #D814, 5x4x12, new surplus  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
900 GPM @ 90' TDH, Goulds #3196MT, 6 x 4 x 10, SS  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
900 GPM @ 265' TDH, United #VP, R-4x9,1 stage,3560 RPM,C.S./Cast Iron,#843  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 270' TDH, United #VP, 4x9,1 stg,3550 RPM,carbon steel,#1977  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 340' TDH, Byron-Jackson #SM, 4X6X10,1 Stg.,3550 RPM,Carbon Stl,#1526  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 570' TDH, Bingham #HSB, 4x6x11,1 stg,3560 RPM,C.S./cast iron,#1692  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 625' TDH, Ingersoll-Rand #AS, 4x12,1 stg,3550 RPM,C.S./cast iron,#511  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1250' TDH, Pacific #THF-2, 4,2 stg,3600 RPM,C.S./12 chrome,#1381  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1280' TDH, Pacific #BFJTC, 4x,4 stage,3560 RPM,CS/Cast Iron,#199  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1280' TDH, Pacific #BFJTC, 4x,4 stage,3800 RPM,CS/Cast Iron,#59  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1480' TDH, Bingham #MSD, 4x6x10B,4 stg,3560 RPM,Al.bronze/monel,#889  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1650' TDH, Pacific #BFJTC, 4,6 stg,3550 RPM,CA-15/12 chrome,#2897  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1950' TDH, Pacific #JTC, 4,6 stg,3560 RPM,C.S./Carbon Steel,#3843  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1950' TDH, Pacific #JTC, 4X,6 stg,3940 RPM,12 Chrome/12 Chrome,#4141  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1950' TDH, Pacific #JTC, 4X,6 stg,3560 RPM,C.S./cast iron,#4140  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 1950' TDH, Pacific #JTC, 4x,6 stage,3560 RPM,CS/304 SS,#4127  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 2800' TDH, Pacific, 6" X-JTC-8 stage, chrome  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
900 GPM @ 4000' TDH, Pacific #ATB, 4,8 stg,3570 RPM,C.S./17 chrome,#245  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
900 GPM @ 4250' TDH, Pacific #BFIC, 4,10 stg,3550 RPM,carbon steel/12 chrome,#2880  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
903 GPM @ 51' TDH, Goulds, 15 HP motor, unused  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
915 GPM @ 225' TDH, Pacific #6VCN7, Size 6x15S  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
920 GPM @ 610' TDH, Ingersoll-Rand #AT, 4x12,1 stg,3550 RPM,Carbon Steel,#1876  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
940 GPM @ 302' TDH, Byron-Jackson #SJA, 4x6x10.5L,1 stg,3550 RPM,C.S./C.I.,#4443  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
940 GPM @ 1170' TDH, Goulds #3360, 6"-4 stage, CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
940 GPM @ 4380' TDH, Worthington #4WTF12, 10 stage, chrome  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
948 GPM @ 8971' TDH, BJ BW/IP Intnl., 2940 HP, 10 stage, S.S., new   
Halco Energy Equipment Co Inc, Duson, LA 337-278-6678 () Carroll Hall
950 GPM @ 465' TDH, Bingham #CAP, 3x6x11.5A,1 stg,3560 RPM,CS/12 Chr,#4347  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
950 GPM @ 465' TDH, Bingham #CVA, 3x6x11.5A,1 stg,3560 RPM,Carbon Steel,#2954  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
950 GPM @ 2100' TDH, Bingham #MSB, 4x6x10,6 stage,3560 RPM,Carbon Steel,#2497  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
950 GPM @ 2250' TDH, Bingham #MSB-H, 4x6x10,6 stage,3580 RPM,CI/CI,#49  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
960 GPM @ 54' TDH, Sulzer-Bingham, 6X8X11.5CVA, 15 HP Vert.Elec.Motor  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
960 GPM @ 173' TDH, United #VP-7, A-4x6x7,1 stg,3560 RPM,C.S./12 Chrome,#4511/12  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
960 GPM @ 257' TDH, Ingersoll-Rand #WLN,4X8,1 stg,3550 RPM,Carbon Steel,#2402  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
960 GPM @ 1000' TDH, Paco, 6 x 5 x 10-3/4, with 40 HP TEFC motor  
Lewdon Enterprises, Long Beach, CA 562-436-8971 (Fax 562-624-0991) Lew Sherrill
970 GPM @ 575' TDH, Byron-Jackson, 6 x 8 x 14, 3550 RPM, reconditioned  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
970 GPM @ 575' TDH, Byron-Jackson / United, 6x8x14,3550 RPM,rebuilt less motor  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
975 GPM @ 1630' TDH, Pacific #AC, 4 S,4 stage,3550 RPM,S-1/cast iron,#663  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
980 GPM @ 150' TDH, Bell & Gossett #5G, Series 1510, 60 HP, 1800 RPM  
Sure Companies, Plano, TX 972-881-9009 (Fax 972-881-9012) Roger Siverson
980 GPM @ 375' TDH, Pacific #SVC, 4, 1 stage, Carbon Steel, #2667  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
980 GPM @ 555' TDH, Goulds #3316, 8x10-17, 1800 RPM less motor, 1 used  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
990 GPM @ 3350' TDH, Pacific #BFI DS, 4"SR,10 stg,3570 RPM,carbon steel,new,#2837  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 76 psig, Worthington, 1750 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
1000 GPM @ 77' TDH, #3196MT, 4 x 6 x 10, DI  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1000 GPM @ 85' TDH, Goulds #3410, 6 x 8 x 11, new DI   
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1000 GPM @ 90' TDH, Goulds #3196, 4x6-10,1 stg,1780 RPM,ductile iron,#1414  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 90' TDH, ITT #AC2000, 8x6x11, CI, unused   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
1000 GPM @ 115' TDH, Durco, 6 x 4 x 13, DI (2)  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1000 GPM @ 140 psig, Gorman-Rupp, 3/60/460 V., 1750 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
1000 GPM @ 148' TDH, Goulds #3700, 4x6x7, 1 stage, 1750 RPM, #3847  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 193' TDH, Durco, 6x4x16/135rv Hastelloy C (2)  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1000 GPM @ 250' TDH, Pacific #SVCN, 4X8.5,1 stg.,3570 RPM, 316 SS, #3045/6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 250' TDH, Pacific #SVCN, 4x8.5,1 stg,3550 RPM,C.S./cast iron,#4252/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 250' TDH, Pacific #SVCN-7, 4x8.5,1 stg,3550 RPM,C.S./cast iron,#4254/5  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 280' TDH, Worthington #5DTVS-10 titanium w/150 HP 440 V., new (2)  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1000 GPM @ 330' TDH, Worthington #4LRF-11, stainless, 110 BHP steam turbine, new  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1000 GPM @ 336' TDH, Carver #4NC-2, stainless,4x 6x 11,turbine,125 HP,unused  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1000 GPM @ 337' TDH, Carver #4NC2 stainless, vertical, w/150 HP motor, new   
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1000 GPM @ 337' TDH, Worthington #6LNS-20, stainless less 150 HP, new  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1000 GPM @ 350' TDH, Byron-Jackson #DSJ, 4x6x10.5,1 stage,3550 RPM,C.S.,#3221  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 350' TDH, Byron-Jackson #DSJA, 4x6x10.5,1 stg,3570 RPM,C.S.,#2797  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 350' TDH, Byron-Jackson #DSJA, 4x6x10,1 stage,3550 RPM,C.S.,#3109  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 380' TDH, Pacific #SVCN-7, 4x10.5,1 stg,3570 RPM,C.S./C.I.,#3939/40  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 400' TDH, Pacific #SVSN, 4x10.5, 1 stg, 3550 RPM, CS/Cast Iron, #78  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 1070' TDH, Ingersoll-Rand #4GT-2, 2-Stage, 35765 RPM, (2) Avail  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
1000 GPM @ 1400' TDH, Ingersoll-Rand #RTS, 6,4 stg,3550 RPM,CI/Bronze,#28  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 1440' TDH, United, 4X11-MSNL, Horizontal Split Case Pump, 3/4 Stage  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
1000 GPM @ 1455' TDH, United #MSNDL, 4x11-H,3 stg,3560 RPM,C.S./bronze,#541  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 1455' TDH, United #MSNDL, 4x11-H,3 stg,3560 RPM,C.S./12 Chrome,#539  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 2180' TDH, Bingham #4X6-10C MSD-6 stg.S4 Mat'l  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
1000 GPM @ 2590' TDH, Bingham #MSD-D, 4x6x10C,7 stg,3560 RPM,CA6NM/CA6NM,#4585/86  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 3500' TDH, Byron-Jackson #DVMX, 4x6x9H,7 stg,3600 RPM,C.S.,#3060  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1000 GPM @ 4100' TDH, Union #MPE, 4x6,12 stg,3573 RPM,C.S./Cast Iron,#2419  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1005 GPM @ 1440' TDH, Ingersoll-Rand #HMTA, 5,4 stg,3560 RPM,carbon steel,#38  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1025 GPM @ 300' TDH, United #VP, W-4X9,1 stg.,3550 RPM,Carbon Steel,#4194  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1030 GPM @ 5170' TDH, Bingham, 4x6-9D, 8 stg., 316SS, 4500 RPM, new  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
1050 GPM @ 245' TDH, Ingersoll-Rand #UVR, 6, 3550 RPM, Carbon Steel, #974  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1050 GPM @ 445' TDH, Union #HHS-8, 4x6x10B,1 stg,3550 RPM,C.S./303 SS,#4320/1/2/4  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1050 GPM @ 855' TDH, Byron-Jackson, 4x6x15-1/2-SMJ, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1050 GPM @ 940' TDH, Pacific #SVC, 4LX,1 stg,3950 RPM,316 SS/12 Chrome,#1687  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1050 GPM @ 2185' TDH, Bingham #MSB, 4x6x10,5 stg,3560 RPM,12 Chr/12 Chr,#1948  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1050 GPM @ 2640' TDH, Ingersoll-Rand #HMTA, 5,8 stg,3570 RPM,C/S-1/Bronze,#1691  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1060 GPM @ 130' TDH, Ing.-Rand #VOC, 3x1.5x6,1 stg,3500 RPM,Cast Iron,New,#3567  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1070 GPM @ 1000' TDH, Ingersoll-Rand #SGT, 4,2 stg,3560 RPM,C.S.,#2240-42  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1070 GPM @ 1000' TDH, Ingersoll-Rand #SGT, 4,2 stg,3550 RPM,C.S./12 Chr.,#1846/47  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 100' TDH, Ing.-Rand #HEC, 6x4x10,1 stg,1780 RPM,ductile iron/316 SS,#1408  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 175' TDH, Worthington #D1011, 6x4x13,1 stg,1750 RPM,Alloy 20,#2300  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 260' TDH, Byron-Jackson #SJA, 4x6x8.5,1 stg,3550 RPM,carbon steel,#3041  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 266' TDH, Bingham #CAP-8, Size 6x8-21A  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1100 GPM @ 275' TDH, Bingham #CAD, 4x6x8.5H, 1 stage, 3550 RPM, CS, #3432  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 277' TDH, United, J6x17 VP, all 316SS (4)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
1100 GPM @ 310' TDH, Ingersoll-Rand #A, 4x9,1760 RPM,C.S/cast iron,#3844  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 310' TDH, Ingersoll-Rand #A, 4X9,1,1780 RPM,carbon steel,#3899  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 310' TDH, Ingersoll-Rand #AN, 4x9,1 stg,3560 RPM,C.S./12 Chr,#4228/9  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 310' TDH, Ingersoll-Rand #AN, 4x9, 1 stg, 3600 RPM, 316 SS, #1521  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 310' TDH, Ingersoll-Rand #AS, 4x9,1 stg,3600 RPM,carbon steel,#1968  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 310' TDH, Ingersoll-Rand #AT, 4x9,1 stg,3550 RPM,CS/12 Chrome,#687  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 310' TDH, Ingersoll-Rand #ATC, 4x6x9,1 stg,3550 RPM,C.S./C.I.,new,#686  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 337' TDH, Worthington #5LRN-11, stainless, new (3)  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1100 GPM @ 418' TDH, United #TC, P-4X11,1 stg.,3550 rPM,C.S./C.S.,New, #4311  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 510' TDH, Byron-Jackson #SJA, 4x6x14, 1 stage, #3185  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 510' TDH, Byron-Jackson #SJA, 4x6x13, 1 stage, Carbon Steel, #3186  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 690' TDH, Bingham #CAD, 4x6x13LH,1 stage,3560 RPM,C.S.,#2620/3441  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 2150' TDH, Byron-Jackson #DVMX, 4x6x9D,6 stg,6750 RPM,CS/316SS,#2293  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1100 GPM @ 4265' TDH, Bingham #ME,102-290/1,9 stg,3550 RPM,CA6NM,new surplus,#3138-40  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1110 GPM @ 680' TDH, Bingham #CAD, 4x6x13,1 stage,3560 RPM,Carbon Steel,#3343  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1110 GPM @ 680' TDH, Bingham #CAD, 4x6x13, 1 stage, 3560 RPM, CS/Monel, #4032  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1110 GPM @ 2028' TDH, Goulds #3300, 4x6x10-8 stage, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1120 GPM @ 280' TDH, Union #PRV, 4x8x10.5,1 stg,3550 RPM,C.S./cast iron,#294  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1120 GPM @ 894' TDH, Ingersoll-Rand #DAD, 4x11,3 stg,3560 RPM,CS/CA6NM,#2609/10  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1125 GPM @ 160' TDH, Ingersoll-Rand #HOC, 6x4x13,1 stg,1780 RPM,316 SS,#4444/5  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1125 GPM @ 1550' TDH, United #BFDHH-B, 4,4 stg,3550 RPM,C.S./cast iron,#1510/1  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1140 GPM @ 373' TDH, Union #6x6x10-1/2-HHS, CS/CHR  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1145 GPM @ 2410' TDH, Ingersoll-Rand #HMT, 5,5 stg,3560 RPM,5 Chr/5 Chr,#487  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1145 GPM @ 2410' TDH, Ingersoll-Rand #HMT, 5,5 stg,3560 RPM,CS/Cast Iron,#549  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1150 GPM @ 165' TDH, Bingham #CVA, 6 x 8-14A, S-1, new  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
1150 GPM @ 305' TDH, Bingham #CAP, 4x6x9,1 stg,3560 RPM,C.S./cast iron,#711  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1150 GPM @ 382' TDH, Wilson Snyder #ESN, 4x6x10.5,1 stg,3550 RPM,304 SS,#4407  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1150 GPM @ 480' TDH, Bingham #CD, 4x8x11,1 stg,3560 RPM,CS/Cast Iron,#1930  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1156 GPM @ 1926' TDH, United #K4X11MSNE, 5 stage, steel  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1160 GPM @ 380' TDH, Wilson Snyder #ESN-H, 4x6x10.5,1 stg.,1750 RPM,C.S.,#4166  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1170 GPM @ 250' TDH, Bingham #CAD, 4x6x8.5H,1 stg,3560 RPM,carbon steel,#1090  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1170 GPM @ 360' TDH, Ingersoll-Rand #SJV, 4,1 stg,Carbon Steel/Cast Iron,#1077  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1191 GPM @ 226.4' TDH, Bingham, 6x8x17 CVA, 1740 RPM  
Westpower Equipment Ltd, Calgary, AB 403-720-3300 (Fax 403-720-3175) Dave Mcintosh
1200 GPM @ 208' TDH, Ingersoll-Rand, 1750 RPM, new (2)   
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
1200 GPM @ 400' TDH, Pacific #HVC, 4x10.5,1 stage,4250 RPM,316 SS/316 SS,#1688  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 518' TDH, United #DSTC, K-4x13,1 stg,3550 RPM,C.S./C.I.,reblt,#280  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 655' TDH, Pacific #HVC, 4x13,1 stage,3560 RPM,CA-15/304 SS,#2591  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 660' TDH, Pacific #HVC, 4x13, 1 stage, 316 SS, #3896  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 685' TDH, Pacific #HVC, 4x13,1 stage,4250 RPM,316 SS/316 SS,#1689  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 700' TDH, Bingham #CAP, 4x6x14A,1 stg,3550 RPM,316SS/316SS,#4528  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 760' TDH, Pacific #HV, 4x13,1 stage,3570 RPM,316 SS/316 SS,#221  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 1320' TDH, Bingham #MSD-D, 4x8x10.5,3 stg,3560 RPM,C.S.,#3065  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 1600' TDH, Pacific #I, 6,4 stg,6600 RPM,carbon steel/cast iron,#1995  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1200 GPM @ 3100' TDH, Weir #RK7D 28S 10V, 7 stg,3560 RPM,CA6NM/CA6NM,new,#2934/35  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1220 GPM @ 620' TDH, Pacific #SVCN, 4x13, 1 stg, 3550 RPM, Carbon Steel, #4573  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1230 GPM @ 703' TDH, Ingersoll-Rand #ATN, 4x13,1 stg,3570 RPM,C.S./C.I.,#2243  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1230 GPM @ 720' TDH, Ingersoll-Rand #A, 4x13,1 stg,3550 RPM,carbon steel,#2971  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1240 GPM @ 135' TDH, Bell & Gossett #5X6,75HP, C.I.,bronze fitted, 460/3/60,unused  Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1250 GPM @ 125' TDH, Nagle, vert., w/100 HP motor, 1800 RPM, 3/60/480 V. (2)   
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
1250 GPM @ 950' TDH, Bingham #MSB, 6x8x10.5,3 stg,3560 RPM,C.S./cast iron,#1309  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1250 GPM @ 1640' TDH, United #THF-B, 6,2 stage,3550 RPM,C.S./C.S.,#207,#216  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1270 GPM @ 970' TDH, Bingham #MSB, 4x6x11,2 stg,3560 RPM,C.S./Bronze,#3893  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1270 GPM @ 1730' TDH, Bingham #MSB, 6x8x11,4 stg,4700 RPM,CS,rblt,#2853/4  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1270 GPM @ 1730' TDH, Bingham #MSB, 6x8x11,4 stage,4700 RPM,CS,#2862  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1270 GPM @ 2180' TDH, Bingham #MSB, 6x8x11,5 stg,3580 RPM,CS/12 Chrome,#3317  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1270 GPM @ 2180' TDH, Bingham #MSB, 6x8x11,5 stg,3560 RPM,Carbon Steel,#3318  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1275 GPM @ 230' TDH, Union #HHS, 6x6x8A, 1 stg, 3550 RPM, CS/CS, new, #4518/19  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1277 GPM @ 59' TDH, Goulds, 7.5 HP motor, 3/60/230/460 V.  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
1295 GPM @ 123' TDH, Bingham, 6X8X14B CAP, steel, #106/7 (2)  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
1300 GPM @ 70' TDH, Allis-Chalmers, 8000 series, 6x8x11, DI/BF  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1300 GPM @ 148' TDH, United #VP, E-6x13,1 stg,1750 RPM,CS/Cast Iron,#1721  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 148' TDH, United #VP, E-6x13,1 stg,1750 RPM,Carbon Steel,#1720  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 215' TDH, Sulzer Cat #29-501-59-847-X0X2942X, 125 HP,TEFC motor (5)   
R B Mosher Co, Dickinson, TX 800-444-2207 (Fax281-559-1152) Byron Mosher
1300 GPM @ 228' TDH, Union #HHS, 6x6x8,1 stg,3550 RPM,C.S./cast iron,#849  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 490' TDH, Ing.-Rand #A, 4x11,1 stg,3550 RPM,C.S./Cast Iron,#4422/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 490' TDH, Ingersoll-Rand #A, 4x11,1 stg,3560 RPM,carbon steel,#4182  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 490' TDH, Ingersoll-Rand #AH, 4x11,1 stg,3550 RPM,C.S./12 chrome,#4134  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 600' TDH, Pacific #SVC, 4x13,1 stg,3570 RPM,Carbon Steel/Cast Iron,#856  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 800' TDH, Bingham #MSB, 6x8x11,2 stg,3560 RPM,C.I./Bronze,#1236/7  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 800' TDH, Bingham #MSB, 6x8x11,2 stage,3560 RPM,C.S./Bronze,#1233  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 800' TDH, Bingham #MSB, 6x8x11,2 stg,3560 RPM,Carbon Steel,#4069  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 1230' TDH, Bingham #MSB, 6x8x11,3 stg,3565 RPM,CS/Bronze,#2481  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 1250' TDH, Ingersoll-Rand #RT, 6,4 stg,3550 RPM,C.S./cast iron,#540/672  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 1370' TDH, Bingham #MSD, 4x6x10.5C,3 stg,5700 RPM,carbon steel,#4600/1  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 1820' TDH, Bingham #MSD, 4x6x10.5C,4 stg,3560 RPM,carbon steel,#2197  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 1824' TDH, Bingham #MSD-D, 4x8x10.5C,4 stg,3560 RPM,C.S.,#4183/4  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 2280' TDH, Bingham #MSD, 4x6x10.5C,5 stg,3560 RPM,Carbon Steel,#3878  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1300 GPM @ 2280' TDH, Bingham #MSD, 4x6x10.5C,5 stg,4000 RPM,CS,#4185/6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1305 GPM @ 112' TDH, Union #VCM, 3x4x11,1 stg,1750 RPM,C.S./316 SS,#4472/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1310 GPM @ 890' TDH, Byron-Jackson #SJA, 4x6x15.5L,1 stg,3550 RPM,CS/304 SS,new,#4312  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1320 GPM @ 930' TDH, Byron-Jackson #SJA, 4x6x15.5HH,1 stg,3550 RPM,C.S./C.S.,#4372  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1320 GPM @ 930' TDH, Byron-Jackson #SJA, 4x6x15.5HH,1 stg,3550 RPM,C.S.,#4373  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1320 GPM @ 930' TDH, Byron-Jackson #SJA, 4x6x15.5HH,2 stg,3570 RPM,C.S.,#3271-74  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1325 GPM @ 2200' TDH, Ingersoll-Rand #DAD, 4x11,5 stg,3560 RPM,CS/12 Chr.,#4040  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1340 GPM @ 1900' TDH, Bingham #MSB, 6x8x10.5,6 stg,3560 RPM,Cast Iron,#3245  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1340 GPM @ 3160' TDH, Ingersoll-Rand #HMTA, 5,4 stg,3560 RPM,carbon steel,#3356  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1350 GPM @ 120' TDH, Goulds 3405, 6 x 8 x 12, 316 SS  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1350 GPM @ 1470' TDH, Pacific #JTC, 6x,4 stage,3560 RPM,Carbon Steel,#4085/6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1350 GPM @ 1470' TDH, Pacific #JTC, 6x,4 stg,3560 RPM,CS/Cast Iron,#4384-7  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1350 GPM @ 1600' TDH, United #BFHH-B-4, 4,4 stage,3560 RPM,CI/CI,#4152  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1350 GPM @ 2200' TDH, Ing.-Rand #DA, 4x11,5 stg,3560 RPM,12 Chr/CA6NM,#4149/50  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1350 GPM @ 2640' TDH, Ingersoll-Rand #DA, 4x11,6 stg,3560 RPM,carbon steel,#4580  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1350 GPM @ 2675' TDH, Ingersoll-Rand Model 5"HMT-6 stage, CI/CI  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1350 GPM @ 2800' TDH, Ing.-Rand #KD-9, 12x18,9 stg.,1760 RPM,C.S./chrome,new,#1557  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1350 GPM @ 4950' TDH, Ingersoll-Rand Model 5"CHT-9 stage, double case, CS/CHR  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1355 GPM @ 98' TDH, Armstrong,in-line 8x8x11.5,50HP,1775rpm,230/460/3/60,unused (2)   Show item detail 
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1370 GPM @ 2930' TDH, Pacific #JTC, 6x,8 stage,3560 RPM,CS/CS,#4226  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 62' TDH, Sulzer, 6x8-11.5, APR31-150, SS, (2) unused   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
1400 GPM @ 90' TDH, Goulds, 3196XLT, 6X8-13/10.5 trim, 316SS (2)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
1400 GPM @ 125' TDH, Goulds #3405, 6 x 8 x 14, (2 pc 1BRZ 1 CI)  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1400 GPM @ 134' TDH, Worthington #CNG104, 6,1 stg,1750 RPM,Alloy 20/Alloy 20,#1769  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 140 TDH, Durco MKII/GII, 6x4-13A, SS   
Valley Equipment Co Inc, Jonesborough, TN 423-753-3541 (Fax 423-753-3589) David Robertson
1400 GPM @ 140' TDH, Fairbanks-Morse, 1750 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
1400 GPM @ 140' TDH, Pacific #SPMC,6X13,1 stg,1765 RPM,Carbon Steel,#2373  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 153' TDH, Bingham, CAP, 6x8x14B, S-1 (2)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
1400 GPM @ 175 psi, Byron-Jackson, 1450 RPM, 6 x 8  
Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson
1400 GPM @ 250' TDH, Paco, 5x4 split case, 29-40127-24051, unused, surplus   
General Pump & Machinery, Palmyra, PA 717-838-5356 (Fax 717-838-4326) Bruce Andrews
1400 GPM @ 260' TDH, United #DSVP, 6x9, 1 stage, 12 Chrome, #4068  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 260' TDH, United #DSVP, E-6x9,1 stg,3560 RPM,C.S./Cast Iron,#4093  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 292' TDH, Ingersoll-Rand #UB, 4,1 stage,3550 RPM,C.S./C.I.,#410  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 400' TDH, Byron-Jackson Model 6x8x11H-SM, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1400 GPM @ 450' TDH, Goulds #3700, 4x6-11,1 stg,3600 RPM,C.S./Cast Iron,#3608/9  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 549' TDH, Bingham Model 4x6x13-1/2-HSB, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1400 GPM @ 620' TDH, Wilson Snyder #ESN-L, 4x6x13,1 stg,3550 RPM,CS/12 chr,#89  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 645' TDH, Goulds #3700, 4x6x13,1 stg,1800 RPM,C.S./cast iron,#4360  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 760' TDH, Bingham #HSB, 4x6x13.5,1 stg,3560 RPM,C.S./cast iron,#1660  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 800' TDH, Ingersoll-Rand, 6HMTA-3/2 stg., steel case (2)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1400 GPM @ 850' TDH, Bingham #MSD-D, 4x6x10B,3 stg,6000 RPM,Carbon Steel,#3026  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 880' TDH, United #TC, U-4x15,1 stg,3550 RPM,12 chrome/304 SS,#2840  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 1600' TDH, United #MSNDH, 4x11,4 stg,6650 RPM,carbon steel,#1900/12  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1400 GPM @ 3045' TDH, Worthington Model 6"WCS-5 stage, double case, CS/CHR (3)  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1403 GPM @ 237' TDH, Bingham Model 6x8x10-HSB, CS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1410 GPM @ 2550' TDH, Ingersoll-Rand, 1300B HP Terry turbine, 3560 RPM  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
1430 GPM @ 660' TDH, Byron-Jackson #SC7, 4x6x13H,1 stg,3560 RPM,C.S./C.I.,#4301  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1436 GPM @ 727' TDH, Union Model 6x10x15-HHD, Steel/Steel  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1437 GPM @ 49' TDH, Goulds, 30 HP motor, unused  
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Fax 847-541-1279) R. Caitung
1440 GPM @ 275' TDH, United #VIL, 6 DS-A,1 stage,3550 RPM,C.S./Cast Iron,#348  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1450 GPM @ 350' TDH, Ingersoll-Rand #A, 6x19,1 stg,1750 RPM,Carbon Steel,#1947  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1450 GPM @ 1200' TDH, Ing.-Rand #RT, 6,4 stg,3550 RPM,Cast Iron/Cast Iron,#24-6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1450 GPM @ 2000' TDH, Bingham, 6X6-12 1/2 MSD, 4 stg, C-6 Mat'l (5)  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
1460 GPM @ 1473' TDH, Byron-Jackson O.L. Multiplex, 6X8L, 4-Stage, (2) Available  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
1460 GPM @ 1875' TDH, Worthington Model 6"WTL12-4 stage, CHR/CHR  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1460 GPM @ 2100' TDH, Bingham #MSB-MH, 6x8x10.5,5 stage,3560 RPM,CS,#2498  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1460 GPM @ 6900' TDH, Bingham, 4x6-9D, 6 stg., 316SS, 6200 RPM, new  
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales
1480 GPM @ 355' TDH, Ingersoll-Rand #A, 6x19,1 stg,1780 RPM,Carbon Steel,#3544/5  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1480 GPM @ 355' TDH, Ingersoll-Rand #A, 6x19,1 stg,1770 RPM,carbon steel,#2662  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1480 GPM @ 356' TDH, Ingersoll-Rand #A, 6x19,1 stg,1780 RPM,CS/CI,#282,#2036  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1480 GPM @ 710' TDH, Byron-Jackson #GSJH, 1.5x3x10.5L,2 stg,3570 RPM,12 chr,#2592  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 70' TDH, United #VIL, 6,1 stage,1160 RPM,Carbon Steel,#2561  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 80' TDH, Goulds 3405, 8 x 10 x 12G, 316 SS, (2) pc  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1500 GPM @ 144' TDH, Pacific #SPME, 6x13,1 stg,1770 RPM,Carbon Steel,#1923/4  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 144' TDH, Pacific #SPML, 6x13,1 stg,1770 RPM,CS/Cast Iron,#1645/6  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 145' TDH, Ing.-Rand #JVL, 6,1 stg,1165 RPM,Cast Iron/Cast Iron,#360  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 160'TDH,Sykes,28'auto self prime,dry run,Deutz diesel drive,trailer mtd.  
Mid-Atlantic Engine Supply Co, Cinnaminson, NJ 856-829-7798 (Fax 856-829-6248) Al Cook
1500 GPM @ 200' TDH, Worthington #6LRV-16, cent.pumps,100 HP,1750 RPM,rblt (3)   
U S Combustion Products Inc, Ketchum, ID 208-788-9367 (Fax208-788-9368) S.Backstatter
1500 GPM @ 1970' TDH, Reda #88HD-HSS, Centrifugal Pump  
Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Bo Ward
1500 GPM @ 1970' TDH, Worthington, 6WTL-124, 4 stage, all chrome  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1500 GPM @ 2000' TDH, Bingham #MSB, 6x8x12,4 stg,3560 RPM,cast iron,#3247  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 2400' TDH, Ingersoll-Rand #HMT, 6,6 stg,1780 RPM,Cast Iron/Bronze,#2283  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 2700' TDH, Ingersoll-Rand #HMTA, 6,6 stg,3730 RPM,Carbon Steel,#2100  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 4600' TDH, Ebara #SPVIIM, 200x150,6 stg,3560 RPM,12 Chrome,#2563  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 4600' TDH, Ebara #SPVIIM, 200x150,6 stg,3560 RPM,12 Chr./12 Chr.,#734  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1500 GPM @ 5600' TDH, Union, 6 x 10 MQE, 9 stage, 316SS  
Usedpumps.com, Inc., Houston, TX 713-467-5500 (Fax713-467-5566) George Keiller
1500 GPM to 2000 GPM, Paco base mounted pumps  
Morris Mechanical Sales & Ser, Clinton, MA 978-365-9675 (Fax 978-365-6214) Harry Howe
1520 GPM @ 975' TDH, Bingham, 6MSB, 3560 RPM, SS, 5 stage, #132  
Centrifugal Technology Inc, Shreveport, LA 318-635-1940 (Fax 318-635-1947) Charles/Daniel
1540 GPM @ 440' TDH, Pacific #SVCN, 6x11, 1 stage, 3570 RPM, CS/Cast Iron, #4393  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1540 GPM @ 440' TDH, Pacific #SVCN, 6x11,1 stg,3550 RPM,C.S./Cast Iron,#4392  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1540 GPM @ 2175' TDH, Bingham #MSD, 6x8x11A,5 stg,3560 RPM,C.S./12 Chrome,#3948  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1550 GPM @ 180' TDH, United #VP-7, A-6x8x14,1 stg,1780 RPM,C.S./12 Chr.,#4509/10  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1550 GPM @ 420' TDH, Pacific #SVCN, 6x11,1 stg,1770 RPM,C.S./Cast Iron,#4262/3  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1550 GPM @ 1200' TDH, Pacific #ROV, 6",2 stg,3560 RPM,carbon steel,#4536  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1550 GPM @ 1200' TDH, Pacific #ROV, 6,2 stage,3570 RPM,C.S./cast iron,#1250/51  
PumpWorks, Houston, TX 800-349-2018 (Fax713-956-2141) M. Weidmann
1560 GPM @ 2842' TDH, Ingersoll-Rand #6X11DAD, 416 SS, new (2)  
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Fax 412-221-2827) Linda/ Frank
1570 GPM @ 1828' TDH, Bingham #MSD2D, 6x10x11D,4stg,3916 RPM,CS/12 Chr.,new,#4417