CNC MACHINERY & EQUIPMENT:
BORING MILLS, HORIZONTAL, Table Type, CNC

BORING MILLS, HORIZONTAL, Table Type, CNC CNC MACHINERY & EQUIPMENT - Surplus Record
Used CNC Inc. Specializing in Used CNC Chipmaking Equipment
There are 103 listings in this category
File update: Sun, Feb 5, 2012 01:28
Advanced Search
 Sort by:
Original Sort

3" Giddings & Lewis #330T, (2) spdl #5MT, #4MT, 24"W, 48"X, 42"Y, 30"x60"TWS, #25571   Show item detail rfq

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

3" G & L HBM, 72"bed trvl,40"col.trvl,82"saddle trvl,36"x 60"table rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

3" Juristi, 28"x 39"table, #5MT, 39"cross, 39"vert., 827 RPM (3483)   Show item detail rfq

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

3" Toshiba #BFT9S, CNC HBM, with PC Based 4-Axis CNC,16-1530 RPM,#5 MT   Show item detail rfq

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt

3-1/2" Hercules, 49-1/2"x 47"table, MJ Tech CNC control, 24 ATC, Cat 40   rfq

AH International, Las Vegas, NV 702-331-0187 (Fax 702-255-7702) Sales

3.5" Union #BFT-90, 63"X,45"Y,36"Z,rotary table,15 HP,Fagor 8025 CNC ,95,#21374   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

3.9" Toshiba #BTD9, 48"X,39"Y, rotary table, Tosnuc 3 CNC, 1989, #18125   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" Cincinnati Gilbert, horiz.boring mill,48"x96"tbl,96"X,72"Y,36"Z,#50 tpr,#6320   Show item detail rfq

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

4" Collet Englehardt #BFF6100NU, new CNC,70"X,47"Y,29"Z,35"x 70"table rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4" DeVlieg #MC4340, jig mill, Dynapath Delta 20, air R.T., #50 tpr, rebuilt 1990   Show item detail rfq

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

4" Giddings & Lewis #65JEB4, 60"X,48"Y, 1965, rebuilt 1980, #285039   rfq

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

4" Giddings & Lewis #70A-E4-T, 128"X,74"Y, AB Series 9, 60"x 144"table, #21135   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" G & L #PC40,6-1340rpm,48x72"tbl,72"cr,60"vt,#50,tlchgr,25hp,g&l800,'85,id#5894   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

4" G & L #PC40, new CNC,30"spdl.trvl,72"cr.trvl,30"saddle trvl,50"vert.trvl,4'x6'tbl rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4" Giddings & Lewis #PMC-4, 60"X,48"Y,36"x 72"table,1320 RPM,Fagor CNC,'11,#21356   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" G & L, 108"X,72"Y,27"Z,48"x 120"table,1200 RPM,Dynapath 60M,retrofit 2005 rfq

R T Machinery Sales Inc, Troy, MI 248-743-9700 (Fax 248-743-9702) Bob Tesch

4" Lucas #42B60, HBM,Lucas CNC ctrl,74"x40"tbl,#6MT,pendant ctrl,20 HP,#50880   rfq

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

4" Machining Systems (equivalent), #50 tpr,30 HP,rotary tbl,Fanuc,78"cross,58"vert   Show item detail rfq

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 () Bill Garbe

4" Nomura #BN-100-SR, 60"X,47"Y, #50 taper, 45"x 50"Rotab, AB 8400 CNC, #21207   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" Scharmann #FB100, Heidenhein TNC 426CB,37"x 51"rotary,refurb/retro'99,#8145   Show item detail  Show Video of Item rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

4" Tos #WHN11, 50"Y, 92"X, 40"Z, #50 taper, 55"x 55"rotary table, new CNC rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4" Union #BTF105, 4-Axis, table type, CNC Heidenhain 355 control   Show item detail rfq

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

4" Kearns-Richards #NC100,48"univ.6-axis rot/tilt tbl,40 ATC,25hp,#50tpr,1120rpm rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4.3" Challenger #HBM-110, 60 ATC,86"X,63"Y,B-Axis rotary table,TSC,2011,#20981   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" Femco, 78"x 71"table,78"X,71"Y,2500 RPM,Fanuci 21i,full 360 deg.index   rfq

Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Fax 519-622-8351) Paul Geddes

4.3" Kuraki #KBT-11, boring mill, 59"X, 39"Y, 25 HP, 1994, #B57516   Show item detail rfq

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

4.3" Microcut #HBM-110, 60 ATC,86"X,63"Y,B-Axis rotary table,TSC,2012,#20982   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" Toshiba #BTD110R13, 5-Axis,63"X,44"Y,44"x49"B-Axis,50atc,Tosnuc 888,'00,#21191   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" Union #BFT110-6, Fanuc OM-A w/Heidenhain scale feedback, retrofit 1990   Show item detail rfq

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

4.3" Union, 80"X, 50"Y, 49"x55"rotary table, #50, Heidenhain TNC 360, 2000, #1420   rfq

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

4.3" Wotan Rapid #0/C1.5,4-axis,49"x,40"y,32"z,31.5x31.5rot.tbl,40ATC,GE2000,'86   Show item detail rfq

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

4.33" Kuraki #KBT1105DX, 79"X,59"Y,79"Z,1100 RPM,#50 taper,Fanuc 10M,1988   Show item detail rfq

Star Equipment Co., Inc., Union Lake, MI 248-366-6400 (Fax 248-366-6500) Chris Starnes

4.33" Kuraki #KVT-11DX, Fanuc 15M, 47"x 55"table, 1986 rfq

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

4.33" Nomura #B110SR, 45x50"rotary tbl,63x50x39x26"trvl,30 ATC,Fanuc 11M,'87,#8572 Show item detail rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

4.33" Toshiba #BP-110.20, 30atc,100"X,65"Y,55"x80"tbl,3k RPM,Tosnuc 888,'96,#20985   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.33" Wotan Rapid-O,31.5"x31.5"rotary,49.2"x,40.2"y,32.2"z,5-axis,GE2000,'87,#7593   rfq

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

4.5" G & L #NC25H, 4'x 6'table, 6'X, 5'Y, 4'Z, 25 HP spindle, 0-1200 RPM, new CNC rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4.52" Defum #AD115, 63"X,60"Y,rotary table,25 HP,Fanuc OM CNC,retro 1994,#18098   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Alesa Monti #AT-127, CNC horizontal boring mills,traveling column,Fanuc 18iM,47.2"x59"rotary table,1300 RPM,1990,#B575127   rfq

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

5" Cincinnati Gilbert #5D, 120 x 96 x 60 x 40, Fanuc 11, rotary table, 1992   rfq

Winslow's Machine Tool Sales, Lexington, TN 731-614-1296 (Fax 731-968-8976) Don Winslow

5" Cincinnati Gilbert, #50 taper,1000 RPM, 48"x 96"table, 30 HP, #12845   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

5" Cincinnati Gilbert, 196"X,72"Y,60"x196"tbl,Heidenhain CNC new 1996,1976,#17950   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Cincinnati Gilbert, 10'X,8'Y,3'Z,60x34x120"tbl,rotary tbl,Fanuc 11M,'92,#20001   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Cincinnati Gilbert, T-type,196"X,72"Y,36"Z,24"W,60"x196"tbl,Heiden.426B,retro'96   rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

5" Cincinnati Gilbert #J, Heidenhain TNC 426CB,4-Axis,60"x194"tbl,retro.'99,#143037   rfq

Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt

5" Cincinnati Gilbert #JT, big capacity   Show item detail rfq

DiPaolo CNC Retrofit Ltd, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins

5" Cintimatic HBM, #40 tpr Quick Change,48"x36"tbl,50"X,48"Y,24"Z,DC spdl & drive rfq

Tas Iron Ltd, Berea, OH 440-973-4394 (Fax 440-973-4395) Timothy Jones

5" DeVleig #JMC55R80, CNC Boring Bar with Pallet Shuttle, 1986   rfq

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

5" DeVlieg #B5751, 40 tools,40"x50"pllts,80"x60"x40"x24"trvls,3k RPM,thru spdl.   Show item detail rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

5" Giddings & Lewis #350T, Allen-Bradley 8400,103"X,72"Y travel,1680 RPM,retro 1989   Show item detail rfq

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

5" G & L #80DP5, Heidenhain TNC124 CNC,80.5"X,50"Y,36.5"Z,63"W,60"x 96"tbl rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

5" G & L Fraser #70A-G5-T, G & L 8000M,96"vert.,60"x144"table,#50 taper,1977   Show item detail rfq

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

5" G & L Fraser #70A-G5T,G&L 8000M,132x96x60",#50,1200rpm,48x48"RT,'77,#b575121   Show item detail rfq

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

5" G & L Frazer #A-130T, HBM,72"vert.48"x60"rotary,G&L CNC or manual,IP/UP,v/nice rfq

American Machinery Co Inc, Newtown, CT 203-520-8435 (Fax 203-426-2747) Bill Buckens

5" G & L #G50T, 96"X,60"Y,48"x 96"tbl,40HP,thru spdl,full contour,800 ctrl.(5564)   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

5" G & L #G50T, 98"X,84"Y,48"x 96"table,30 HP,G & L 800M CNC,1981,#17358   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #G50-T, 96"X,72"Y,36"Z,48"x96"tbl,48"x60"rotary w/full B-Axis,800 CNC   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

5" G & L #G50TX, new CNC,36"spdl.trvl,84"cr.,96"saddle,51"vert.,(2)48"x 72"pllts rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

5" G & L #MC50, 40 ATC,66"X,68"Y,(2) 48"x48"pallets,G&L 8000,1993,#20744   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Giddings & Lewis #PC-50, 96"X, 72"Y, 54"W, 1120 RPM, 800M control, exc.(5940)   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

5" Giddings & Lewis #PC50, 40 ATC,96"X,72"Y,48"x 96"table,G & L 800M,1981,#17372   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #PC50, 803/4M G & L CNC,36"spinning trvl,60"hdstk trvl,60"x 96"tbl,'83 rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

5" G & L #PC50, 72"X,60"Y,36"Z,62"W,48"x 72"pallets,30 HP,G & L CNC,#20125   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Giddings & Lewis #PC50, G&L 800, 48"x 96"table, 72"vert, 96"cross, 1979   Show item detail  Show Video of Item rfq

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax 440-232-5541) T. Wigglesworth

5" Giddings & Lewis #PMC-5, G&L 800B ctrl,120"x60"table,#50 tpr,25 HP,1990,#147028   Show item detail rfq

Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt

5" G & L #PMC50, Fanuc 6, 48"x 122"table, 110"cross, 72"vert., #50 taper, #1262   rfq

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

5" Giddings & Lewis, HBM,5-Axis,103"vertical,134"cross,rotary table,retrofit 1996 rfq

Allied Machinery Co, Warren, MI 586-754-9200 (Fax 586-754-5131) Ted Barrie

5" Lucas #30T99, 108"vert.travel,108"cross travel,60"x 110"table,Fanuc OM   Show item detail rfq

Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul

5" Lucas #30T99, 3-axis Fanuc OM,108"vert,108"cross,60"x110"table,#50 tpr,#1265   rfq

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

5" Lucas #54B120, 50 taper, 60"x120" tbl.,120" long.,84" vt.,Siemens 810, hydro ways,retro.'90 rfq

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

5" Lucas, 72"X, 60"Y, #50 spindle, 4-axis, 1400 RPM, 1978/1995 rfq

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

5" Tos, 13.8", 196"X, 118"Y, 3000 RPM, Heidenhain 530 control   rfq

Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Fax 519-622-8351) Paul Geddes

5" Union #BFT 13/6, CNC table type horizontal boring mill, Fanuc 16iM control   Show item detail rfq

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

5" Union #BFT-130, 110"X,75"Y, 70"x78"rotary table,Heidenhain 355,1993,#21106   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Wotan, boring mill, 39.5"x 49.5"x 39.5", rotary, Fanuc OM control, 1990's   Show item detail rfq

D & S Equipment, Leoti, KS 620-375-2513 (Fax 620-375-4538) Steve Krenzel

5.1" FPT Area T-15, Fidia F-1 5-Axis CNC,68"x78",full 4th tbl,118"x78"x40",'95,#B1321   Show item detail rfq

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

5.1" G & L #A130T, G&L400,68"X,69"Y,31"Z,40"W,48"r/tbl,10-1140RPM,#50,v/nice,U/P   Show item detail rfq

Knights Industries, Oklahoma City, OK 828-301-5612 (Fax 405-745-6603) Kennith Daniluk

5.12" Doosan ACE, 40 ATC,118"X,78"Y,B-Axis r/tbl,6k RPM,40 HP,Fanuc 18i,'05,#20717   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" FPT, ram type,40 ATC,118"x,78"y,39"z,rot.tbl,univ.hd,4k RPM,Fidia F1,'94,#21326   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Giddings & Lewis #PC-50, 98"x,82"y,rot.tbl,60 ATC,Probe Fanuc 160iMB,'04,#21313   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Juaristi #TS5, 157"X,112"Y,98"x78"B-Axis Rtab,30 ton,Fanuc 16iMB,'99,#20792   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Microcut #HBM5T, 137"X,102"Y, 70"x 86"B-Axis table,Fanuc 18i,2011,#19766   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Nomura #BN130, 90 ATC,144"X,91"Y,34"Z,60"x 120"table,Fanuc 6M,1985,#18860   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Pama #AT130, 60 ATC,122"X,63"Y,49"pllt,facing hd,50 HP,Fanuc 15M,'93,#17494   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Pama Center, 5-axis,49"pllts,60"X,72"Y,60atc,40HP,Heidennain retro'06,#17557   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" SMTCL #PBC-130, 40ATC,138"X,78"Y,r/tbl,3k RPM,clnt thru,Fanuc 18i,'08,#21494   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Tos #WHN13.8A, 138"X,80"Y,31"Z,49"W,1k RPM,rotary,Heidenhain CNC,'82/'08,#21498   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Toshiba #BP130R22, 60 ATC,149"X,90"Y,full 4th axis,Tosnuc 888,many extras,'01   Show item detail  Show Video of Item rfq

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

5.12" Toshiba #BP13B, 118"X,80"Y,59"x118"tbl,B-Axis 60"tbl,16iMB retrofit '07,#21300   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Toshiba #BP-13B-P7, 118"X,81"Y,full 4th Axis,Fanuc 16i-MB,retrofitted 2009   Show item detail rfq

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

5.12" Toshiba #BTD-130H.R22, ATC,118"X,90"Y,r/tbl,2500 RPM,Tosnuc 999,'10,#20775   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.3" Nomura, 177"X,58"Y,55"x63"pallet shuttle,facing hd,ATC,34 HP,Fanuc 15MB,#15076   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5-3/8" Cincinnati Gilbert type J, new Anilam 3000 2-axis CNC,84"cross x 72"vertical   Show item detail rfq

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

5.9" Scharman HeavyCut, 118"X,118"Y,ATC,AAC,60"x90"pllt,Siemens CNC,1995,#17496   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" G & L #70-H6-T, CNC,G&L 800 ctrl,6"spdl.,50 tpr,72"x144"tbl,1969,#B575120   Show item detail rfq

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

6" G & L #G60-T, 168"X,120"Y,48"Z,72"x168"tbl,40hp,GE Fanuc 15iMB,reman'12,#21278   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" Giddings & Lewis #G60-T, G&L 8000M-B CNC Ctrl., 2500 RPM, 60"x96"Tbl., 1991 rfq

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

6" Lucas #642B120, new CNC,108"X,120"Y,156"W,36"spindle trvl,60"x 120"tbl rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

6" Union #CBFK150, 63"x 79"table, 80 ATC, 98"X, 78"Y, 62"Z, 27"W, #S-14512   Show item detail rfq

U S Equipment Co, Detroit, MI 313-526-8300 (Fax 313-526-5303) Sales

6" Union, Fanuc 0 CNC, 63" x 78.75"table, 62"Y   Show item detail rfq

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

7" G & L, 120"X,89"Y,43"Z,72"x 120"table,1200 RPM,GE Fanuc Series 16M,1980 rfq

R T Machinery Sales Inc, Troy, MI 248-743-9700 (Fax 248-743-9702) Bob Tesch

Giddings & Lewis, automatic tool changer,100 station,#50 taper,stand alone,#454   Show item detail rfq

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Kuraki #KBT-10DXA, Horizontal Boring Mill, CNC rfq

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

Back to category listings.

Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search
Surplus Record Copyright © Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise
Privacy Policy 		Ariba Logo