CNC MACHINERY & EQUIPMENT:
BRAKES, PRESS, CNC (Also See Brakes, Press Alphabetical Classification)

BRAKES, PRESS, CNC CNC MACHINERY & EQUIPMENT - Surplus Record
Sterling Machinery Over 50 years of Service
There are 252 listings in this category
File update: Sun, Feb 5, 2012 01:28
Advanced Search
 Sort by:
Original Sort

12 Ton, Bantam Air brake with Smart Gage CNC back gauge   rfq

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Fax 256-536-1322) Ron Hardy

15 Ton, Wysong #1548, mechanical,4'OA,X-Caliber,single Axis CNC,#2178   rfq

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

17 Ton, DiAcro #14-48, CNC hydra-mechanical press brake,Automec CNC BG,dual palm ctrls on ram,manual ram adj.,#A1398   Show item detail  Show Video of Item rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

17 Ton, DiAcro #14-48-2, 4'OA, FOMBG, 1977   Show item detail rfq

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

17 Ton, DiAcro #14-48-2, with Hurco 5C CNC back gauge, P.B. & F.P., 1991 rfq

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

20 Ton, Wysong #H-2052, CNC hydra-mech.,4'OA,Automec CNC 1000 CNC BG,man.ram adj,tonnage ctrl valve,electric ft pedal,#A1332   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

20 Ton, Wysong #H2052, 4'OA,DRC Dynabent 3 CNC BG,man.ram adj.w/ind,3 HP,#4655   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

27.5 Ton, Amada #RG-25, 4' OA, Hurco 5C, 3.9" str., 15-3/4" throat, 2 HP, 1992 rfq

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

33 Ton, Guifil #PE-30, hydraulic,4'11"OA,53"BH,5'x 14 ga.,24"Autogage,#24223   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

33 Ton, Hurco #PH30-12, 47.5"OA, 40"BH, Hurco AB 7 2-Axis CNC, 1999, #20676   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

35 Ton, DiAcro #14-72, press brake with Hurco Autobend 7 control   Show item detail rfq

Sanson Machinery Group, Kirkland, WA 425-513-8263 (Fax 425-513-8264) Mary Van Gerpen

35 Ton, DiAcro #16-96, 8',hydra-mech.press brake,Hurco 5C CNC BG,ISB light curtains,mtr.ram adj,2-spd ram,#9469   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

35 Ton, Wysong #H3552, hydra-mech,2-axis Dynabend,lt.curt,ram adj,flngs,'86,#9328   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

35 Ton, Wysong #H-3552, Hydra-mechanical press brake, 4'OA, 38"BH, 2-1/2"str, 8-1/2"thrt, 5 HP, 10-29 SPM, 1986, #145539 rfq

Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Rick Lazarus

35 Ton, Wysong #H3572, hydra-mech,2-axis Dynabend,lt.curt,ram adj,flngs,'84,#9329   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

38 Ton, Amada #RG25, 4'OA,Amada NC9EX 3-Axis CNC ctrls,hyd.,up-acting,1984,#15204   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

38 Ton, Amada #RG-35, 48"OA, 40"BH, Hurco AB 7 2-Axis, lower die holder, #21128   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

38 Ton, Amada #RG35S, upacting hydraulic,49"OA,40"BH,Hurco 2x CNC BG & ram,1983   rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

38.5 Ton, Amada #RG35S, CNC brake press, 49"OA, NC9EXII, 1994 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

38.5 Ton, Amada #RG35S, NC9EXII, 1988, #9135   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

38.5 Ton, Amada #RG35S, NC9EXII 3-Ax,49.3"OA,40.1"BH,3.9"str,1 Touch hldr,'96 #21328   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

40 Ton, Pacific #J40-6, 6'OA, 51"BH, 6"stroke, Hurco Autobend 5, 1978, #22240   Show item detail rfq

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

40 Ton, Strippit LVD #540, 5'OA,Cybelec DNC 60,3-Axis CNC back gauge,5 HP,#4687   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

40 Ton, Wysong #H40-52, 4'OA,hyd.,down-acting,front manual back gauges,1996,#15207   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

40 Ton, Wysong #H4072, 2-Axis Hurco AB7S6 CNC, 89" OA, 62" DBH, 1994 rfq

Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.

40 Ton, Wysong #H40-72-B, hydra-mech.press brake,6'OA,Autogauge CNC99 2-Axis ctrl,foot pedal,dual palm ctrl stand,1992,#A1797   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

40 Ton, Wysong #H40-72-B, hydra-mechanical press brake,6'OA,Autogauge CNC 99 2-Axis control,1992,#A1798   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

40 Ton, Wysong #H4096, 8'OA,Hurco 5C,ram adj.,5 HP,Ser.#HPB17-142,1989,#8078   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

40 Ton, Wysong #H-4096, hydra-mech.,8',Comp-U-Bend CNC BG,1 shot lube,elec.foot pedal,1989,#9649   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

44 Ton, Fabmaster #PPT44-8, CNC Press Brake, 2005   Show item detail rfq

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

45 Ton, Gingras, 4' x 3/16" Combination brake/shear, w/Hurco CNC back gauge, '97 Show item detail rfq

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

45 Ton, Wiedemann #W4560, 60"x 72"sheet,updated control,tooling galore rfq

Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Fax 513-575-3997) Chris Wilson

55 Ton, Amada #FBD5012, 4'OA,hyd,up-acting,Amada NC9EX-II 3 Axis CNC Ga.,'91,#15229   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

55 Ton, Amada #FBD5020, up-acting, 78.74"OA, NC-9EXII, 1993, #27723 rfq

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

55 Ton, Amada #FBD5020, 6'OA,hyd,up-acting,Amada NC9EX-II 3 Axis CNC Ga.,'91,#15228   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

55 Ton, Amada #HFE-5020, CNC press brake, control, 5-Axis back gauge, 2001   Show item detail rfq

Manufacturing Solutions, Costa Mesa, CA 714-545-0940 (Fax 714-850-8795) Mike Dieveney

55 Ton, Amada #RG50, hyd.press brake,82"OA,59.84"BH,3.9"stroke,15.75"throat,NC9EXII 3-axis CNC,foot treadle,1990,#A1590   Show item detail  Show Video of Item rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

55 Ton, Amada #RG50, upacting hydraulic,82"OA,60"BH,Hurco 2x CNC BG & ram,1984 rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

55 Ton, Amada #RG50, NC 9EXII, hobby shop, 1993, #9332 rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

55 Ton, Amada #RG50, 6'OA,hyd.,up-acting,Amada NC9EX 3-Axis CNC ga.,1986,#15203   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

55 Ton, Amada #RG50, 6'OA,hyd.,up-acting,Amada NC9EX 3-Axis CNC ga.,1986,#15202   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

55 Ton, Amada #RG50, Autogauge 99 back gauge, 1988, #9134   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

55 Ton, Amada #RG50, 82.1" O.A., NC9EXII, 1994 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

55 Ton, Amada #RG80, 82"OA,60"BH,NC9EXII 3-axis CNC,upper holder,1995,#20437   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

55 Ton, Amada, 82"OA,60"BH,Hurco Autobend 7 2-Axis,tool holders,1984,#21127   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

55 Ton, Chicago #68B, 8', Automech G24 control, power ram adj., dual palm, #9088   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

55 Ton, Chicago #810-B, 10',Hurco Autobend IV 1-axis CNC B.G.,air cl./br,2-spd. ram,#7337   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

55 Ton, Niagara #55-6, hydraulic, 6'OA, 54"BH, 2x CNC BG, CNC ram, 1997   rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

60 Ton, Accupress #7606, 6'OA, ETS 2000 CNC control & 2-Axis back gauge, 1999 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

60 Ton, Auto-Sert Flyer, 4', 3-axis CNC hydraulic press brake, touch screen   Show item detail  Show Video of Item rfq

Naab Sales Corporation, Hopkins, MN 800-229-6222 (Fax 952-933-7229) J.Van Heuveln

60 Ton, Auto-Sert Flyer #4x60, hydraulic CNC press brake,4'OA,Hurco 3-Axis CNC BG,light curtains,auto lube system,2000,#A1679   Show item detail  Show Video of Item rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

60 Ton, Auto-Sert Flyer #4x60, hydraulic CNC press brake,4'OA,Hurco 2-Axis CNC back gauge,light curtains,2000,#A1680   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

60 Ton, Dreis & Krump #8L10, 10'OA,8'6"BH,3"str,12"die space,Automech BG,#15630   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

60 Ton, Wysong #MTH60-72, 6',CNC hyd.brake,Automec CNC 99,2-axis CNC BG,tonnage ctrl valve,remote dual palm,2000,#A1482   Show item detail  Show Video of Item rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

65 Ton, Finn Power #E65-2550HS-TS-1, TS-2 control, 2006, #9133   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

65 Ton, LVD #65JS08, Hurco AB7 2-Axis (retrofitted 2006), 1989, #9224   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

66 Ton, Guifil #PE25-60, 8'OA,hyd.,up-acting,Automec 2-Axis CNC ctrls,1994,#15213   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

70 Ton, Adira #QHX-6325, 8'OA,hyd.,up-acting,Cybelec DNC800 5 Axis ctrl,1999,#15183   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

70 Ton, Adira #QHX6325CBP, 5-Axis,Cybelec DNC800,100"bed,81"BH,dual palm ft sta.,'99   Show item detail rfq

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

70 Ton, Adira, 5-Axis, 100"bed, 4"stroke, Cybec EC-DNC800, like new, 1999 rfq

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

70 Ton, Allsteel, 10'OA, 8'6"BH, 10'x 12 ga., 24"Autogage 2-Axis back gauge,#25061   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

75 Ton, DiAcro #75-10, 10'OA,Hurco Autobend 5C,CNC BG,2 speed ram,10 HP,#4750   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

75 Ton, DiAcro #75-10, 10'OA,auto ga.,CNC BG,vert.adj.,10 HP,Ser.#675107313,#6123   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

88 Ton, Adira #QHA-8025, CNC hydraulic press brake,8',Automec 2000 2-axis CNC BG,81"between housings,1999,#9811   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

88 Ton, Amada #ASTRO-100M FDB III-8025 Robotic CNC press brake, 98.6"bed lgth, 86.68"BH, 15.7"Throat   Show item detail  Show Video of Item rfq Auction

Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Denny Hoff

88 Ton, Amada #ASTRO-100M FDB III-8025 Robotic CNC press brake, 98.6"bed lgth, 86.68"BH, 15.7"Thrt, Ser.1025102, 1996   Show item detail  Show Video of Item rfq Auction

Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Denny Hoff

88 Ton, Amada #FBD8020, NC9F CNC Back Gauge, 1992, #9275 rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

88 Ton, Amada #FBD8025E, 8',CNC hydraulic press brake,Amada NC9-EX II CNC back gauge 3-axis,1991,#9558   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

88 Ton, Amada #FBD8025NT-AMNC-PC, 98", Up-Acting CNC, 2000, #8813   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

88 Ton, Amada #FBDIII-8025NT, CNC brake press,98"OA,NT control & back gauge,2000 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

88 Ton, Amada #HFB8025, 8-Axis CNC,down-acting,100"OA,83"BH,7.8"str.,1999,#21063   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

88 Ton, Amada #RG80, hydraulic,up-acting,Dynabend 3,single axis back gauge rfq

Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.

88 Ton, Amada #RG80, 8'OA, NC9EXII CNC control & 3-Axis back gauge, 1997 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

88 Ton, Amada #RG80, 8'OA,hyd.,up-acting,Amada NC9EX 3-Axis CNC ga.,1986,#15201   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

88 Ton, Amada #RG80, NC 9EXII 3-Axis, 2002, #9312   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

88 Ton, Amada #RG80, NC9EX-II 3-Axis,78.8"OA,82.1"BH,3.9"str,'83,retro'90,#21329   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

88 Ton, Darley #80/25, 100"OA, 80"BH, 2-Axis CNC, tooling, #21052   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

88 Ton, Finn Power #B-80-2550-R6F-CG, Delem DA-5 6-axis, 2002, #9061   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

90 Ton, Chicago Dreis & Krump #1012L, mechanical,12'OA,10'BH,Automec back gauge,very good condition   Show item detail rfq

Netmachinery Inc., Mooresville, NC 704-660-8130 (Fax 704-663-3475) David Kragh

90 Ton, Chicago #810C, 10'OA,Automec Autogauge CNC99,mtr.ram adj.,mech.,5 HP,#8173   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

90 Ton, Chicago #810L, press brake,10',Hurco Autobend 5S single axis CNC back gauge,2 speed ram,#7336   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

90 Ton, Cincinnati #90AF8, 10'OA,8'6"BH,4-Axis CNC gauging crowning,1992,S27137 Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

90 Ton, Cincinnati #90AFx8, Autoform 3-Axis CNC,10'OA,8'6"BH,8"str,BG,1990,#21129   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

90 Ton, Cincinnati #90AS6, 8'OA, Autoshape control, 2-axis, BG, 1982, #27131   rfq

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

90 Ton, Cincinnati #90ASx6, 8'OA,Autoshape CNC 2-Axis ctrl,elec.foot pedal,#A1764   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

90 Ton, Cincinnati #90CB, 10'OA, 8'6"BH, 10'x 10 ga., Automec gauge, #24976   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

90 Ton, Cincinnati #90CBIIx10, 12',CNC hyd.brake,Cincinnati Proforma ctrl,Automec CNC 2-axis BG,5466 hrs.,2000,#A1483   Show item detail  Show Video of Item rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

90 Ton, Cincinnati #90CBx6, 8'OA,hyd.,down-acting,2-Axis CNC BG system,1982,#15205   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

90 Ton, Cincinnati #90CBx8, 10'OA,8'6"BH,8"str,Eurogauge 3-axis CNC,1978,#19639   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

90 Ton, Cincinnati #90FMII, 10'OA,Form Master II CNC BG,hyd.ram die clamping,#4614   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

90 Ton, Cincinnati #90FMII6, press brake, 3-Axis CNC backgauge, 8'OA, 1995, #8985   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

90 Ton, Cincinnati #90FMII-6, 8'OA,Form Master II,hyd.ram die clamping,25 HP,#4588   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

90 Ton, Cincinnati #90FMII-8, 13'6"OA,Form Master II prog.BG,pwr.up.die clamp,#4613   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

90 Ton, Cincinnati #90FM-IIx6, 2-Axis CNC,8'OA,6'6"BH,1-120 IPM bend spd,'89,#20625   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

90 Ton, Cincinnati Autoform, 12'OA,10'6"BH,crowning,power clamping,1989,#21021   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

90 Ton, Cincinnati Autoform, 12'OA,10'6"BH,crowning,40"back gauge,1988,#21022   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

90 Ton, Cincinnati #CBIIx6, 8'OA, 2-Axis BG, crownable filler block, 2001, #30956 rfq

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

90 Ton, Cincinnati, 8'OA, 6'6"BH, Hurco AB 7 2-Axis, light curtains, 1995, #21215   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

90 Ton, Dreis & Krump #810L, 10'OA, 8'6"BH, 4"str, 8"thrt, Automec Autoguage CNC-99 FOPBG, air clutch, 1982, #143527 rfq

Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Rick Lazarus

90 Ton, Fasti #940-80/20, 7'OA,hyd,downact,3-Ax,Precision Wila Ram,hyd.clamp,'97,#15227   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

90 Ton, Fasti #940-80/20, 7'OA,hyd,downact,3-Ax,Precision Wila Ram,hyd.clamp,'97,#15230   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

90 Ton, Fasti, 81"OA, 65"BH, 80"x 1/4", 2-Axis back gauge, 1997, #25121   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

90 Ton, Fasti, 81"OA, 65"BH, 80"x 1/4", 2-Axis back gauge, 1997, #25122   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

90 Ton, Niagara #1B-60-10-12, 14'OA,mech.cl.& brake,Hurco Autobend CNC BG,5 HP,#3741   Show item detail  Show Video of Item rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

90 Ton, Niagara #1B60-8-10, 10'OA bed & ram,8'6"BH,12"SH,Dynabend CNC BG,#4938   rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

90 Ton, Pacific #FF90-12, 12'OA, 10'6"BH, 8"stroke, 3-Axis DNC60, 1988, #21449   Show item detail rfq

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

90 Ton, Pacific #J90-8, 8'OA,Dyna Bend III 2-axis,machined for flanges,15 hp,1986,#7466   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

90 Ton, Wysong #9010, press brake, 12'OA length   Show item detail rfq

Manufacturing Solutions, Costa Mesa, CA 714-545-0940 (Fax 714-850-8795) Mike Dieveney

90 Ton, Wysong #90-4, 6'OA,CNC BG,A/C & brake,pwr.ram adj.,10 HP,Ser.#PB53-113,1980,#5775   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

95 Ton, Trumpf #V850, 87"OA,69"BH,8-Axis CNC,4-Axis BG,crown,clamp,'05,#20898   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

100 Ton, Accurpress #710010, ETS PLC ctrl,prog.bend depth,10'OA,8'6"BH,2000,#20322   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

100 Ton, Accurpress #710010, AP2 CNC, 24"BG, 10'OA, 102"BH, 1996, #1031 rfq

Cap Machinery Corp, Auburn, MA 508-832-8555 (Fax 508-832-4142) John Capuano

100 Ton, Accurpress, 12'OA, 10'4"BH, ETS 3000 3-axis CNC, installed 2000, #20632   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

100 Ton, Amada #BD1025F, up-acting hyd.,98"bed,Wilson tlng,NC9-FBP CNC,1994,#11268   Show item detail rfq

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

100 Ton, DiAcro, 10',Hydra-Mech.CNC,Hurco Autobend 7,curtains,ram adj,#8683   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

100 Ton, Niagara #HBM-100-10-12, hyd,12'OA,10'6"BH,adj.stroke,7"throat,Hurco Autobend 7 3-axis CNC,dual palm ctrl,#A1653   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

100 Ton, Niagara #HBM100-8-10, 7"str,hyd,Autogage 2-Axis CNC,light curtains,'86,#9186 rfq

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

100 Ton, Niagara #HD-100-8, 10',hyd.,Dynabend ctrl,tonnage ga.,bed/ram drilled,#8963   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

100 Ton, Niagara, hydraulic,10'OA,8'6"BH,10'x 10 ga.,Hurco Autobend 5,#24494   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

100 Ton, Standard #AB100, 8'OA,6'5"BH,lower die holder,light curtains,2001,#21209   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

100 Ton, Wysong #MTH-100-120, 10'OA,hyd.,Hurco Autobend 7,die rail,102"BH   Show item detail rfq

Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler

100 Ton, Wysong & Miles #PH100X96, 8'BA,6'6"BH,GC6000 CNC,4-Axis,crowning,1993   rfq

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve

110 Ton, Amada Astro #100NT, HDS1030, robotic bending cell, 2003, #9294   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

110 Ton, Amada #FBD1030F, 10', hydraulic, NC9 6-axis control, 1991, #8553   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

110 Ton, Amada #FBDIII1030, 118"OAL,8-axis,AMNCDC touch-screen networking ctrl,2001   rfq

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

110 Ton, Amada #HFB-1003, CNC press brake, Operatuer control, 1997, #76173 Show item detail rfq

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

110 Ton, Amada #HFE1003, Operateur CNC BG, 2006, #9158   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

110 Ton, Amada #HFE100-3S, 10'OA, Operatuer 7-Axis ctrl, 5-Axis BG, 2006 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

110 Ton, Amada #RG-100, NC9EXII 3-Axis back gauge, 1996, #9141 rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

110 Ton, Amada #RG100, 10'OA,hyd,up-acting,Amada NC9EX 3-Axis CNC ga.,'87,#15200   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

110 Ton, Amada #RG-100L, 13'OA,hyd,up-acting,NC9EX 3-Axis CNC ga,1986,#15182   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

110 Ton, Amada #RG100S, hyd,98"OA,80.5"BH,3.94"str,Hurco Autobend 5C,'81,#57002   Show item detail  Show Video of Item rfq

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

110 Ton, Guifil #PE30-100, 10'OA, 8'4"BH, 2-Axis Automec CNC 1000, 1996, #20819   Show item detail rfq

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

110 Ton, Guifil #PE30-100, 10'OA,hyd,upacting,Automec CNC 1000 3-Axis Ctrls,'98,#15237   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

110 Ton, LVD #110BH-10MNC, 10', MNC85 CNC BG, 120"bed & ram, 5.12"stroke, #25261   Show item detail rfq

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

120 Ton, Allsteel #120-18, hydraulic,18'OA,16'6"BH,CNC BG & ram,crowning,1993   rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

120 Ton, Atlantic #HDE120-10 hyd, 10'OA,ATL500 2-Axis CNC BG,light curtains,'94,#9185 rfq

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

120 Ton, LVD #PPEB120/10, 10'OA,hyd,down-act,6-Axis,CNC crown,clamp,'01,#15198   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

120 Ton, LVD #PPEB120/10, 8-Axis CNC,10'OA,7.8"stroke,14.9"OH,15.9"throat,tooling,2001 rfq

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

120 Ton, LVD #PPEB120/10, Cadman 8-Axis CNC,120"OA,102"BH,4-Axis BG,crowning,'01,#21482   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

120 Ton, MVD, 4-Axis CNC press brake, like new, 2006, #3002   rfq

USA Machinery Corporation, Allison Park, PA 724-444-3939 (Fax 724-444-3944) Robt. Hughes

120 Ton, Premier #10120R, hyd,10'OA,100"BH,8"str,15"SH,Hurco 3-Axis CNC,'01   Show item detail rfq

Lakeshore Machine Tool LLC, Racine, WI 262-635-8801 (Fax 262-635-8808) John Rogers

120 Ton, Strippit / LVD #PPEB 120/10, 8-Axis CNC, 2001, #9286   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

121 Ton, Trumpf #C110, Delem 6-Axis CNC,122"OA,106"BH,4-Axis BG,crown,'03,#20543   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

122 Ton, Trumpf Trumabend #C110, 134"OA,106"bed,16.5"thrt,13.4"OH,DA-65W CNC rfq

Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.

125 Ton, Amada Astro #100MH, CNC press brake w/robots,ctrl,load/unload,conveyor,1999   Show item detail rfq

Manufacturing Solutions, Costa Mesa, CA 714-545-0940 (Fax 714-850-8795) Mike Dieveney

125 Ton, HTC #125-12H, CNC hydraulic press brake,Automec 125 CNC 9x9 CNC controller,lube sys.,elec.foot pedal,#A1397   Show item detail  Show Video of Item rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

135 Ton, Cincinnati #AF8, 10'OA,6-axis Cincinnati back gauge,auto-crowning,1988 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

135 Ton, Cincinnati Autoshape, 10'OA,manual back gauge,auto crowning,1985,#29932 rfq

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

135 Ton, LVD #PPBL-135-30, CNC hydraulic press brake, 10'OA, 1985   rfq

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

137 Ton, Amada #HFB1254/8, 165",down-acting w/Operateur 8-axis CNC,1994,#8792   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

138 Ton, Amada Astro #100, 10'OA,8-Axis CNC ctrl,6-Axis robot loader,2000,#20799   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

138 Ton, Amada Astro #100MH, automated bending robot,FBDIII1253M,2001,#8701 rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

138 Ton, Amada Astro #100MH, robotic bending cell, 2000, #21219   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

138 Ton, Amada Astro #100MH-1253, 10'OA,hydraulic,upact,Astro 100 MH robotic,#15044   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

138 Ton, Amada #1253, hyd.,10'OA,5-axis robot,load/unload,auto crowning.IP/UP,'00 rfq

All Machinery Sales Inc., Sturtevant, WI 262-886-3432 (Fax 262-878-0368) Dave Buske

138 Ton, Amada #FBD1253III NT, 122"OA,7-axis NT control & back gauge,2004 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

138 Ton, Amada #FBD1253NT, Upacting CNC press brake, 2007, #9326 rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

138 Ton, Toyokoki #HYB12540,9-Axis CNC,157.5"OA,140"BH,6-Axis BG,crown,'00,#21026   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

140 Ton, Wysong #FAB140-96, 8'OA,hyd.,down-act,2-Axis CNC BG,crowning,1998,#15241   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

143 Ton, Amada #HDS1303NT, hyd, 9-axis, 10'1/2" OA, 106.2" belt, clamp, 2001 rfq

Sabito Machinery Inc, Concord, ON 905-738-8730 (Fax 905-738-5148) David Slimowitz

144 Ton, Trumpf #V130, 10'OA,hydraulic,down acting,4-Axis back gauge,crowning,#15130   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

144 Ton, Trumpf #V130, 10'OA,hyd,down-acting,4-Axis BG,crowning,clamping,1994,#15214 Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

144 Ton, Trumpf #V130, Delem DA24-E, 5-Axis CNC, 10' OA, Hyd.Clamping,1996 rfq

Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.

150 Ton, Adira #QHD-13530, CNC brake press, 10'OA, Cyblic DNC50, 2-Axis, very clean   Show item detail rfq

Action Machinery Inc, Louisville, KY 502-459-1313 (Fax 502-473-1953) Thomas Cheney

150 Ton, Atlantic #HD150-10-8, 102" DBH, CNC Press Brake, 1992 rfq

Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.

150 Ton, Haco, 8'6"OA, 82"BH, 8'x 1/4", 3-Axis back gauge, 2000, #25100   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

150 Ton, LVD #150JS-13, 157"OA,124"BH,Hurco AB7 2-axis,rblt cylinders,1994,#20440   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

150 Ton, Pacific #150-14, Hurco Autobend 7 BG,23'OA bed,14'OA ram,121"BH,8"str,#24076   Show item detail rfq

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

155 Ton, Donewell #H155-3000, 10'OA,3300 CNC,pendant,10'die rail,10 HP,1984,#5221   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

165 Ton, Adira #QH10-15040, 13'OA, 15 HP, #4740   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

165 Ton, Adira #QHD-15040, 13'OA,10'4"BH,6.3"adj.str.,DNC 1200/82 Graphics ctrl,'02   rfq

Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Fax 631-467-8249) Ron Shuster

165 Ton, Adira #QHD-15040, 3-Axis CNC hyd,157"L,dwn-act.,4-way die,EVA10 Cybelec,'04 rfq

Carney Machinery Co, Wilmington, DE 302-571-8382 (Fax 302-571-9538) Mike Carney

165 Ton, Darley #EHP150-31/25, 10-axis CNC,122"bend,100"BH,7-axis BG,'00,#JV18937   Show item detail rfq

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

165 Ton, Darley #EHP150-31-25, Delem DA65 10-axis CNC,122"L bend,crown,'00,#20510   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

168 Ton, Adira #QHD15030, hyd,10'OA,100"BH,2x CNC BG,Cybelec DNC 1200 3x CNC,'02   rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

168 Ton, Adira #QHD15040, hyd,157"OA,124"BH,Cybelec/ModEva 10S 3x CNC,2x BG,'04 rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

175 Ton, Accurpress #717512, 12'OA, CNC back gauge, R-Axis, 2006 rfq

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

175 Ton, Cincinnati #175AFX10, 12'OA,Cincinnati Autoform,5-Axis CNC BG,20 HP,#4364   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Cincinnati #175ASx8, 10'OA,Cincinnati Auto Shape,2-Axis BG,hyd.,25 HP,#4444   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Cincinnati #175CB10, 12'OA,2-Axis CNC BG,remote dual palm ctrl,15 HP,#4445   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Cincinnati #175CB12, 14'OA,Hurco Autobend CNC 7 BG,dual palm ctrl,#4441   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Cincinnati #175FPX10 hyd, 12'OA,Proform,autocrown,hd CNC BG,2004,#9183   Show item detail rfq

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

175 Ton, Cincinnati Autoform #AF175x12, 14'OA, 12'6"BH, crowning, 1991 rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

175 Ton, Cincinnati Autoform, 8'OA,16"ext.stroke,2-axis Heavy Duty BG,2000,#20097   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

175 Ton, Cincinnati #CB175-12, 14'OA,hyd,downacting,Compubend 610 2 Axis Ctrl,#15133   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

175 Ton, Cincinnati #CB175x10, 12'OA,10'6"BH,G-24 sgl Axis CNC BG,15 HP,1980,#4920   rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Cincinnati, hydraulic, 8'OA, 6'6"BH, 8' x 1/4", Cinci 2-Axis BG, #25026   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

175 Ton, Clearing Niagara #HBR, hyd,12'OA,10'6"BH,9-Axis CNC ga,auto.crowning   rfq

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve

175 Ton, Clearing Niagara #HBR-175-10-12, hydraulic,PC800 CNC,12'OA,126"BH,1991   rfq

On Target Machine Brokers LLC, Watertown, CT 860-483-0905 () Kevin Brewster

175 Ton, Niagara #HBM175-10-12, 12',hyd,down acting,Hurco Autobend,1992,#14537   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

175 Ton, Niagara #HD175-10-12, 12'OA,Hurco Autobend 7 CNC BG,pwr finger adj,#4615   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Niagara #HMB175-10-12, 10'6"OA,10'6"BH,Hurco AB7 2-axis CNC,1991,#18093   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

175 Ton, Pacific #FF175-12IIS, Cybelec DNC 90 7 Axis CNC BG, 144"OA, 1993, #140626 rfq

Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Rick Lazarus

175 Ton, Pacific #J175-12II, hydraulic brake press,12'bed & ram,10'6"BH,8"throat,10"stroke,Cyblec 3-Axis CNC,30 HP,1998,#4373 rfq

Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Fax 479-785-4362) Jack Yancey

175 Ton, Pacific #K175-16.5, tonnage ctrl,dual palm ctrl on ram,supports,25 HP,#4677B   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Pacific #K175-20.5, tonnage ctrl,dual palm ctrl on ram,supports,25 HP,#4677A   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Pacific #K175-20.5 & K175-16.5, PSC-1000 prog.ram ctrl,ton.ctrl,25 HP,#4677 Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Pacific #K175-8, 8'OA,Automec CNC 2000,2-Axis BG tonnage ctrl,25 HP,#4290   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

175 Ton, Pacific, 14'OA, 12'6"BH, 12'x 1/4", Automec BG, 1999, #24972   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

175 Ton, Pacific, hydraulic, 12'OA, 10'6"BH, new Cybelec CNC, 1993   rfq

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve

187 Ton, Trumpf #V170, 13' OA, 4-Axis BG, 1996 rfq

Advanced Fabricating Machinery, Mississauga, ON 905-822-8600 (Fax 905-822-8601) Donald Mcdonald

187 Ton, Trumpf #V170, 160"OA,145"BH,8-Axis CNC,crowning,clamping,1997,#21196   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

187 Ton, Trumpf Trumabend #V170, 13'4"OA,12'1"BH,crown,Trumpf Da-69 5-Axis CNC,(2)   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

200 Ton, Piranha #200-12, 12'OA,10'6"BH,8"stroke,20 HP,Gen II Plus X BG,2001,#9036 rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

200 Ton, Promecam #RG204, 13'3"OA,Hurco Autobend & CNC BG,30 HP,#4611   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

225 Ton, Amada #FBD-2004, 14'OA,hydraulic,up-acting,Amada NT CNC ctrls,#15019   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

225 Ton, Pacific #K225-24, hydraulic, 24'OA, 20'6"BH, CNC back gauge, 1986   rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

225 Ton, Pacific #K225x8, 8'OA,6'5"BH,Hurco Autobend 7,2-Axis CNC BG,25HP,'97,#4927   rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

230 Ton, Adira #QHD23040, Cybelec 60 3-Axis CNC,13'OA,10'3"BH,7.8"str,BG,'06,#20514   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

230 Ton, Cincinnati #230AF10, Autoform CNC,auto crowning,ext.stroke,flush flr,'94   Show item detail  Show Video of Item rfq

Lakeshore Machine Tool LLC, Racine, WI 262-635-8801 (Fax 262-635-8808) John Rogers

230 Ton, Cincinnati #230AS-10, 12'OA,Cincinnati AS CNC BG,hyd.clamping,25 HP,#4586   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

230 Ton, Cincinnati #230CB12, hyd,14'OA,12'6"BH,Hurco Autobend 20C BG,'80,#56000   rfq

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

230 Ton, Cincinnati #230CB-II, 3-Axis CNC,14'OA,12'6"BH,16"str,2-Axis BG,'01,#20975   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

230 Ton, Cincinnati #230CBx12, hydraulic,14'OA,12'6.5"BH,CNC BG & ram,1977 rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

230 Ton, Cincinnati #230FM-10, 12'OA,Hurco 5C,BG,remote dual palm ctrl,30 HP,#4587   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

230 Ton, Cincinnati #230FM-10'Form Master, 12'OA,Hurco Autobend 7,24"BG,1982 rfq

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn

230 Ton, Cincinnati #230FMII-10, 12'OA,Formaster II,hyd.ram die clamping,25 HP,#4585   Show item detail rfq

IA Machinery Co, Huntington Park, CA 818-508-5255 (Fax 818-508-3025) Rick Kruger

230 Ton, Cincinnati Autoform, 12'OA,10'6"BH,4-Axis CNC,auto crown,1999,#20594   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

230 Ton, Niagara #HBM230-12-14,hyd,14',Hurco 2-ax,bed/ram drill/mach.f/flgs'90,#8932   Show item detail rfq

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

230 Ton, Pacific #J230-10, 10'OA,8'6"BH,5/16"x 10',Hurco AB7 2-Axis CNC,1986,#20546   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

240 Ton, LVD #240/14PPI-MNC90, 14'OA,hyd,downact,4-Axis CNC ga,MNC90,'95,#15215   Show item detail rfq

Active Machinery Sales, Apex, NC 800-377-7553 (Fax 919-387-0096) Mike Sawaia

240 Ton, LVD #240BH16, 18'OA,13'3"BH,9.8"str,14"throat,7-Axis LVD MNC,1990,S29531   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

242 Ton, Amada #HFB2204/8, 14'OA, Operateur 8-Axis CNC & back gauge, 1999 rfq

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka

242 Ton, Amada #HFE220/4, 14'2"OA,down-act,7-Axis Operateur CNC,tlg,2001,#21341   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

242 Ton, Amada #HFE-2204, CNC press brake, control, 5-Axis back gauge, 2004   Show item detail rfq

Manufacturing Solutions, Costa Mesa, CA 714-545-0940 (Fax 714-850-8795) Mike Dieveney

242 Ton, Amada #HFE-2204/4, CNC press brake,Operatuer CNC ctrls,2004,#76574   Show item detail rfq

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

242 Ton, Amada #HFE2204/7, operateur, rare find, 2005, #9082   Show item detail rfq

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

242 Ton, Amada #HFE2204S, hyd,down-acting,14'OA,148"BH,7.8"str,18.5"OH,16.5"throat,5-Axis BG,2007 rfq

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

242 Ton, Durma CNC press, 12', 10"stroke, 10'BH, 4-axis, new in stock rfq

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

244 Ton, Adira #QHD-23040, hyd,157"OA,123"BH,Cybelec 3x CNC,2x back gauge,2006   rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

270 Ton, Colly #PS2000GV, CNC,hydraulic clamping,crowning,6-axis BG,tooling,1999 rfq

Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.

300 Ton, Cincinnati #300Hx16, 20'OA,16'5-3/4"BH,Automech 150 BG & ram,'75,#20754   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

330 Ton, Wysong #RT4-330x122, hyd.,Cyblec DNC 7000,10'OA,8'6"BH,10"str.,1990,#8285 rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

350 Ton, Cincinnati #350-FM-II-14, 16'OA,14'6"BH,Multi-Axis CNC,1996,S30158 Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

350 Ton, Cincinnati Form Master II, 16'OA,2-Axis FMII,crowning,24"BG,R-Axis,1996 rfq

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn

350 Ton, LVD #350/13PPE, 13'OA,10'BH,MNC 95 7-Axis CNC gauging,1995,S29977   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

350 Ton, Salvagnini ROBOformER, 157"OA,6-axis Kuka robot,SiX controls,2007,#29828 rfq

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

352 Ton, Durma CNC press, 13', 14"stroke, 11'BH, 4-axis, new in stock rfq

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

400 Ton, Accurpress #740012, CNC hyd.press brake,12'bed,10"throat,3-Axis,2000,#1565   rfq

Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Fax 631-586-3612) Joe Shapiro

400 Ton, Accupress #ETS-3000, 12'OA,3-Axis,Wila crowning,flush floor,2000,#21474   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

400 Ton, Cincinnati #13, 14'OA,10'6"BH,air clutch/brake,20 HP,Hurco CNC BG,cheap   Show item detail rfq

Lakeshore Machine Tool LLC, Racine, WI 262-635-8801 (Fax 262-635-8808) John Rogers

400 Ton, Cincinnati, 14'OA, 10'6"BH, 12'x 3/8", Hurco Autobend gauge, #25129   Show item detail rfq

Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.

400 Ton, D & K Chicago, #608D, mech.brake press, 126"OA, Auto Ga.CNC BG, flush floor mount, 1949, #147252   rfq

Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Rick Lazarus

400 Ton, LVD #440PPE16MNC, hydraulic,16'OA,159"BH,11.8"str,18"OH,CNC,1991 rfq

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

440 Ton, LVD #440PPE16, 16'OA,13'3"BH,11.8"str,14"thr,7-Axis LVD MNC,1991,S29532   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

705 Ton, Ursviken OPTIMA 640, 14'OA,Cyblec Modeva 12s CNC,prog.die feature,'05   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

750 Ton, Cincinnati, 22'OA, 18'BH, 12"stroke, 60 HP, tooling, 1975, #21518   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

750 Ton, Pacific Fabri #K750-20, 20'OA,16'2"BH,12"stroke,5/8"x 20',1994,#19243   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

1000 Ton, Cincinnati, 22'OA,18' BH,18"str,2-Axis CNC Automec,ajustable & 4 way die   Show item detail rfq

Machinery Inc, Sherbrooke, QC 819-346-2369 (Fax 819-346-5217) Stephane Gourde

2200 Ton, Durma, CNC crowning,46', 24" str, 4-Axis,CNC crowning, new rfq

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Salvagnini #P4-1712, 66.9"bend lgth,.07"bend thick,CNC ctrl,tooling,1997,#19479   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

Back to category listings.

Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search
Surplus Record Copyright © Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise
Privacy Policy 		Ariba Logo