CNC MACHINERY & EQUIPMENT:
LATHES, COMBINATION, CNC

LATHES, COMBINATION, CNC CNC MACHINERY & EQUIPMENT - Surplus Record

Largest PreOwned Haas distributor in the US

There are 515 listings in this category
File update: Mon, Feb 6, 2012 01:29

Advanced Search

Sort by:

Original Sort

Accustar CNC Turning Machine, 20" x 42"

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

AeroTurn #BT-300, horiz,16.1"cut dia.,19.68"cut,2.55"bar,3"bore,Fanuc OiTC,tlstk,'10

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Akebono #MINC-26, gang tool,1-1/16"spindle,9"X&Z travel,Fanuc OT,#dk17998

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Amera-Seiki #LT-50, 50"swing,38"OCS,118"cc,slant bed,8.1 hole,32"chk,new,2011

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #T-310-30", 10"chk,3"hole,4200rpm,25hp,30"Z,TS,CC,Fanuc-0i-TD,new,2011

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #T-415-40", 15"chk,4.5hole,2500rpm,35hp,40"Z,TS,CC,Fanuc-0i-TD,new,2011

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #TC-2L, 8-10"chk,2"hole,5000rpm,20hp,21"Z,TS,PC,CC,Fanuc-0i-TD,new,2011

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

American #3220W, Fagor 8055 TC CNC,30"swg,tlstk w/120"cc,60HP,1200RPM,retro 1998

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

American #4025-120, 32"chuck,12.5"bar,50 HP,Fagor control,new spindle drive,1982,#L215088

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

American Hustler, CNC, 20"x78", Mits Meldas Ctrl, turrets, chip conveyor, #7867

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Behringer / Olympia, 32"x 135",8"spdl hole,dual chks,Fanuc 18T,50 HP,rblt/retro 2000

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Boehringer #180C-U,CNC lathe,12x40"w/tlstk,12 pos.trrt,8"SMW chk,reduced to $9500

Advance Machinery Corp., Benton Harbor, MI 269-849-1000 (Fax 269-849-2200) David Kraklau

Bridgeport EZ Path, 16.5"swing, 3000 RPM, A2 spindle nose, 1997

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Bridgeport Romi, CNC lathe, 10"swing, 21"B/C, 4500 RPM, Bridgeport CNC, 1997

Opincar Machinery, Smyrna, TN 615-459-7983 (Fax 615-223-9820) Tom Opincar

Bridgeport Romi EZ Path, CNC/Manual, 16" x 40", 10"chuck, 3000 RPM, 1994 (2)

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Bridgeport Romi EZ Path I, 20"x40",2-axis,Teach ctrl,10"chuck,2-9/16"bore,1994

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn

Bridgeport Romi EZ Path II, CNC lathe,20"x 40",EZ Path II CNC 32 bit ctrl,3-jaw chk,coolant,auto lube sys,work light,#A2085

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

Chevalier #FCL-1840A, 18"sw, 40"cc, 2-1/4"spdl.bore, 8 sta.tur, Anilam 1200T, 1997

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Churchill, Fanuc 10T,25"swing,14"turn,3.7"spdl bore,30 HP,4k RPM,collet chuck

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Cincinnati #20/12, 72"universal 4-axis,steady rest,tlstk,Acra 5,12"pwr.chk,1976

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Cincinnati #300MT-1800, Acra 850SX CNC,22"sw,10"chk,live tlng,tlstk w/72"ctrs,1994

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Cincinnati Avenger #200MS, 850SX,live tools,sub-spdl,SMW BF,options,clean,1995

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Cincinnati Avenger #200MS, 23.5"sw,20.79"cc,3.15"bore,2.06"bar,chks,tool preset,'94

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Cincinnati Avenger #200MT, 8"chk,2"bar,2-axis,25 HP,chip conveyor,1994,#254079

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Cincinnati Avenger #250T, Acra 2100TC, 23.54"swing, 2.5"bar, 4000 RPM, barfeed, probe

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Cincinnati Avenger Avenger #200MS, CNC live tool TC w/sub-spindle,full C-Axis

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Cincinnati Cinturn #15Ux80, Fanuc CNC,15"3-jaw,4"hole,80"cc,tlstk,remfr w/1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18C, Fanuc CNC,18"3-jaw,4"hole,remanufactured w/1 yr warranty

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18UX100, Fanuc CNC,18"3-jaw,4"hole,100"cc,tlstk,remfr,1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18UX80, Fanuc CNC,18"3-jaw,4"hole,80"cc,tlstk,remfr,1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #2216C, 2-Axis CNC Acra w/CRT,16"SMWK 3-J,actuator,1990,#22240

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Cincinnati Milacron Cinturn #8U-40, 850T Acramatic,30hp,4000rpm,8"3-Jaw chk,tlstk,'89

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

Cincinnati Falcon #200, CNC, Acra A2100E, 15-3/4" sw,12 sta.tur, prog.tlstk,1997

Sabito Machinery Inc, Concord, ON 905-738-8730 (Fax 905-738-5148) David Slimowitz

Cincinnati Falcon #250, CNC,Acra A2100E,15-3/4"sw,4500 RPM,12 sta.tur,chip conv,'97

Sabito Machinery Inc, Concord, ON 905-738-8730 (Fax 905-738-5148) David Slimowitz

Cincinnati Falcon #400-1500, CNC turning center, s/n 5360D01-96-0002, #1610

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Cincinnati Hawk #150, CNC turning center, Acramatic 2100 control, 5500 RPM

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Cincinnati Milicron #300T/1000, Acramatic 850S, 2", 11.8"swing, 39.37"cc

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Cincinnati Talon #210, CNC Lathe,20.86"sw,24"cc,Acra 850SX,4500 RPM,chip,probe,'93

Sabito Machinery Inc, Concord, ON 905-738-8730 (Fax 905-738-5148) David Slimowitz

Cincinnati Talon #210, Acramatic 850SX CNC,chip conveyor,tool presetter,1992,#15357

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Clausing Alpha XT, 15.7"swing,23"gap,50"cc,rigid tapping,Fanuc OiTC,2008,#20042

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Clausing Metosa Taurus #310, 24"x 80"cc,3.1"bore,2500 RPM,15 HP,Fagor 8055,2002

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Clausing Storm #210, CNC turn.center,2-axis,20.87"swing,9.84"turn,Fanuc 21i,'98

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Cleveland #LA-20L, 8"hyd.chk,2"bar,8 pos.hyd.trrt,hyd.tlstk,Fanuc OTC,approx.100 hrs

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt

CMZ #TBI-450, 8"chuck, 24"cc, tailstock, Fanuc OT

Alenco Tool Supply, Chicago, IL 773-725-5700 (Fax 773-725-0296) Paul Braeseke

Colchester #CNC3000L, 17"swing, 80"cc, Fanuc OT, 2000 RPM, tooling, 1990

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Colchester #K, CNC manual teach lathe slant bed,Fanuc 210i-T,10"3-Jaw chk,tlstk,'01

Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Fax 631-586-3612) Joe Shapiro

Craven, 172"x 624", 200 ton cap., 152"c/s, 4-way, 24 RPM, #9AB, 120 HP, 47-97

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Daewoo Puma 10"-2SP, twin spindle, Fanuc 16T, 1996 - 1998 (6) #5823

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Daewoo Puma #12L, 2-Axis CNC turn.center,Fanuc 15T,12"3-jaw,40.2"lgth,1990,#4403

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Daewoo Puma #12L, CNC lathe,22"sw.x 40"cc,18.8"turn,Fanuc OT,12"chuck,chip conv,1992

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Daewoo Puma #2000SY, Fanuc 18,Y-Axis,live milling,sub spindle,bar feeder,2005

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Daewoo Puma #230MSB, 21.65"swing,live milling,sub-spindle,Fanuc 18iT,2000,#20389

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Daewoo Puma #230MSB, Fanuc 18i,8"chk,21.65"swng,2.5"bar cap,live tlg,sub-spdl,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Daewoo Puma #230MSB, 4-Axis M/T center,22"swing,11"cut,2.6"bar,23"Z,12 tools,live heads,2000

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Daewoo Puma #230S, CNC turn.center,sub spdl,barfeed,chip conv,12 tools,20 HP,'01

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Daewoo Puma #230SA, Fanuc 18iT,sub spdl,tool eye,parts catcher,chip conv.,2001

Morris Rezman Machinery Co, Elk Grove Village, IL 312-829-2510 (Fax 312-829-1281) Jeff Rezman

Daewoo Puma #240A, Fanuc 21iTB,2.08"bar,chip conv,tool eye,tailstock,2004,#9196

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Daewoo Puma #250B, Fanuc 18T, 10"chuck, 3", 1997

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Daewoo Puma #250B, 2-Axis CNC lathe,22"swing,15"ct,2.5"bar,25"cc,3300 RPM,25 HP,10 tools,10"chuck,Fanuc 0iT,1997

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Daewoo Puma #400B, 2-Axis CNC lathe,universal,30"swing,22"cut,4.6"bar,41"cc,2k RPM,50 HP,12 tools,15"chuck,Fanuc 18T,1999

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Daewoo Puma #400LB, 18T,18"chk,5.2"bore,30"sw,82"BC,2k RPM,12 trrt,tool eye,SR,'00

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Daewoo Puma #6-3A, Fanuc OT, 20"swing, 12 station turret, live milling, 6000 RPM, 6"chuck, 1994

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Daewoo Puma #8HC, Fanuc OTC,8"chk,19"sw,20"cc,4000 RPM,2"bar.cap,20HP,tlstk,,'95

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Daewoo Puma #8HS, Fanuc OT,8"3-jaw chuck,29.7"swing,2"bar cap,tailstock w/21.7",1995

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Daewoo Puma #8S, Fanuc OTC,20"swing,21"cc,8"chuck,2.4"bore,tool eye,chip,1996

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Daewoo Lynx #200A, Fanuc 21-T , 8"chuck, 1-3/4", 10 position turret, 1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Daewoo #TT2500SY, Fanuc 18iTB,(2)10"hyd.chk,31.5"sw,3.5"bore,10"x31.5"x4.7",BF,'05

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Daewoo Puma #V550, Fanuc 21T,18"chk,31.5"swing,15.4"X,31"Z,10 pos.trrt,'05,#3032

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo #V550, Fanuc 21T, 18"chuck, 31"swing, 2004

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve

Dainichi #B70X200, 28"swing,78"cc,tailstock,12 sta.turret,Fanuc 11-T,1988,#20186

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Dainichi #B70X2000, 26"4-jaw,23"SOC,80"cc,4"bore,12 sta.turret,Fanuc 6T,'88

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

Dainichi #F-30, CNC,12"chuck,3.1"bar,2-axis,25 HP,chip conveyor,tooling,#165674

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

Dainichi #Mx75x1500, 30"sw.,60"cc,Fanuc 15t,2 trrts (8+4),(5) chks,chip conv,S29754

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

DMG #GMX500, 4.01"bar, (2) 16"chucks, 3200 RPM, 2006

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

DMG Twin #42, CNC T/C,Seimens 840D,(12) 12 sta.turrets,(2)C-axis,chip conv,2008

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Doosan #310NM, Fanuc 21,milling,chip conveyor,LNS Eco Load L mag.bar feed,#UD100028

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick

Doosan DooTurn #310, 2-Axis,Fanuc OT,10"3-jaw,tlstk,19.68"sw,17.71"cc,12.20"turn,'98

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Doosan Puma #480L, 32iT,32"chk,7.1"bore,36"sw,83"BC,1500RPM,12 trrt,chip conv,2010

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan Puma #600, 21iT,24"chk,5.9"bore,40"sw,62"BC,1800RPM,12 trrt,chip conv,2009

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan #S280, Fanuc 21T,8"chk,2",parts catcher,chip convyr,LNS ECO,2000

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Doosan #S280, 11"dia.,13"length,8"chuck,tailstock,chip conv.,Fanuc 21iT,2001,#21139

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Eagle #GW550 Lathemate, Crusader ML ctrl,8"chk,tailstock,3000 RPM, from school

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve

Emco Maier #465DS 6-XR4B-V01-N37004, (2) 12 pos.trrt,7"3-J,Siemens 840D,(2),#24621

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Emco Maier #465MC, 6-Axis,twin spdl,R4B-A03-M1003,Seimens 840D 6-X ctrl,(2),#24620

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Emco Maier Emcoturn 360, CNC lathe, Siemens 810T, 18.1"sw, 22"cc, live tool, part catcher, tailstock, chip, 1988, #137249

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Emco Turn #332MC, Siemens ctrl,16.9"sw,8.7"turning,sub-spdl,live milling,2001

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Emco Turn #360, 8"chuck,18"swing,22"Z,live tooling,4000 RPM,30 HP,1988

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Emco Turn #465DS, 6-axis,2-spdl,2-trrt,live milling,C-axis,Siemens 840D,'99,#15943

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Emco Turn #465MC, 2 spdl,2 trrt,live mill,C-axis,gantry ld,Siemens 840D,'99,#15942

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Eurotech Elite #730SL, Fanuc control,live tooling,sub-spindle,bar feed,xclnt

Sterling Machinery Ventures, Troy, MI 248-879-1989 (Fax 248-879-5501) Will Secor

Feeler #FTC20, Fanuc OI CNC,13.7"swing,8"chuck,tlstk w/13.5"ctrs,25HP,4500RPM,new

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Femco Durga #25E, Fanuc 0T,8"chuck,10"x 23"turn cap,22 station turret,15 HP,1989

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Femco Durga #HL25, horizontal CNC lathe,8"chuck,tailstock,chip conveyor,2000

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Femco #WNCL35/70, 2-Axis,12"3-Jaw hyd.chk,Fanuc 0T,2500 RPM,30/40 HP,tlstk,'96

Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Fax 631-586-3612) Joe Shapiro

Femco #WT-50, Fanuc OT, 24.4"swing, 2500 RPM, in/mm, 15"hydrualic chuck, chip, 8 tools, 1996

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fryer #ET21, 21"x 40",upgraded T2000 CNC,22k RPM,10"chk,8 sta.trrt,tailstock,2000

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick

Fuji #ANS-40T, 23"sw.,12"chk,Fanuc 18iT,robot ldr,12 pos.trrt,3k RPM,'00,#7598

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Fuji #ANW-50, 22.8"x22"cap.,22.8"sw.,20-1900 RPM,50 HP,10 pos.tur.,chip conv.,1995

Precision Technologies Inc, Englewood, TN 423-887-5656 (Fax 423-887-5658) Dan Lee

Geminis CNC4 Plus 720x3000 flat bed lathe,Fagor ctrl,120"cc,28.35"swing,tlstk,'99

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Giddings & Lewis #15U, 16-1/2"chuck, 4.13"hole thru spindle, 45 HP, rebuilt 1994

Knights Industries, Oklahoma City, OK 828-301-5612 (Fax 405-745-6603) Kennith Daniluk

Giddings & lewis 36h turning machine *great frame for retrofit (1200)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Giddings & Lewis #50U, 30"sw,72"cc,18"chk,Fanuc 10TF,4-1/2"bar,chip,50 HP,1989 (2)

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Gildemeister #CTX twin spindle, Grundig Eltro Pilot CNC, 1996

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Gildemeister #CTX400, 2-1/2"bar cap,5k RPM,parts cat.,shunk 3-jaw,Hainbach col.,nice

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Gildemeister #GAC-65, 2.75"x10.8",2.56"HIS,8 pos.turret,Grundig Electropilot Ep8-S 8-Axis CNC,Iemca feed,1994

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Gildemeister #MF Sprint 42, Siemens 840C,42mm cap,6300 RPM,2 trrts,C-Axis,live,'99&98

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn

Gildemeister #MF twin spindle, Siemens Sinumerik CNC,9.44"swing,31.49"cc,'88/'98

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Gildemeister Twin #65, twin turrets,twin spindles,live tools,5.7"x 22.8",C-Axis

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Gurutzupe, flat bed 36"x 120", Fanuc 0-T, 4-jaw, chip, steady, 1998

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

H.E.S., 149" x 25', 6-Way, 12' wide bed, Fanuc OT, hard ways, 120" 4-jaw

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Haas #HL-1, loaded with options, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-1, 8"chk,2"bar,10 pos.turret,3750 RPM,15/20 HP,Quick code,floppy,1996

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Haas #HL-2, priced right, clean, 1995

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-4, very good condition, 1997

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-4, 30"swing,34"cc,10"chuck,tailstock,30 HP,full chip conveyor,1997

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Haas #HL-6, gear box, loaded with options, 1997

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-20, CNC turning center w/live tool, 2"bar, 10 station turret, 2003

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #SL-20T, Combination Lathe, like new condition, 10 spindle hours, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-20T, CNC turn.center,23"x10",tlstk,parts catcher,tool presetter,low hrs,'05

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #SL-20T,8"chk,20"sw,20"cc,4000 RPM,2"bar cap,tlstk,auger,tl.preset,12/2000

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Haas #SL-30, Big Bore,live milling,30"swing,4"spdl bore,12 pos.turret,auger,1999

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Haas #SL-30, CNC lathe,3"spdl bore,12 sta.turret,12"chk,rigid tap,chip auger,'05

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Haas #SL-30BB Big Bore, (2) 18"chucks, tooling, priced right, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-30T, gear box, loaded with options, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-30T, CNC, tailstock, presetter, 4100 hours, 2001

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

HAAS SL-30T, 2002 CNC Turning Center, 3" Bore, Tool Presetter, Parts Catcher, Chip Auger 1 Meg M, All avail Toolholders

Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard

Haas #SL-30T, 10" Chk., 2.7770 Hole, 3400 RPM, 30 HP, 2000, #9179

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

Haas #SL-30TB, Big Bore, tailstock, chip conveyor, usb, 2001

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Haas #SL-40, 40"sw,44"cc,15"3-jaw,4.6"bore,2400 RPM,10 sta.trrt,tlstk,chip conv,'02

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Haas #SL-40BB Big Bore, (2) 18"chucks, tooling, loaded, low hours, 2005

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #TL-2, CNC/manual toolroom lathe,tlstk,chuck encl,10"chk,8"X,48"Z,2k RPM,2007

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Haas #TL25, 4-Axis w/sub-spindle,4k RPM,30 HP,3"barfeed,10"pwr chuck,34"Z,2007

Industrial Resources Inc, Old Saybrook, CT 860-388-3439 (Fax 860-388-2740) Ray Magaldi

Haas #TL25, sub-spindle, live milling, C-Axis, barfeed, geared head, 2008

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Haas #TL25, CNC lathe,Haas CNC,10"chuck,3"hole,30"swing,39"centers,2006,#76346

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas #TL-4, 35"x 91", 10.8" hole, 500 RPM, 2-chucks, steady, 1700 hrs., 2008

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Hankook Protec 11N, Fanuc 18TA,43"sw.over bed,29"sw.over carriage,nice,2004

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Hankook Protec-7N, Fagor 8055 control, new on skid

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Hardinge #AHC, turning center,1-1/16"bar cap.,13"swing over ways,6"over cross slide,12 bar feeds,6 pos.turret,#4989

Netmachinery Inc., Mooresville, NC 704-660-8130 (Fax 704-663-3475) David Kragh

Hardinge #CHNC, CNC turning center,AB Series 7300,7370 3-8 KW motor,14"swing over ways,8 pos.turret,tailstock,#3264

Netmachinery Inc., Mooresville, NC 704-660-8130 (Fax 704-663-3475) David Kragh

Hardinge #CHNC1, 1994

Netmachinery Inc., Mooresville, NC 704-660-8130 (Fax 704-663-3475) David Kragh

Hardinge #CHNC1 Precision, Siemens 810 control,mist collector,excellent cond.,1987

Holt Equipment, Hopkins, MN 952-938-2202 (Fax 952-767-0840) Wayne Mader

Hardinge #CHNCII, Fanuc OT,14"swing,8"SOCS,12"cc,1-7/8"spdl.hole,8 sta.trrt,#L215082

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

Hardinge #CHNC-II Super Precision, CNC Lathe, Fanuc 10TF, 14"swing, 50-5000 RPM, 8-stations, 1987, #135005

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Hardinge #CHNCII+, 1-5/8"bar,12 HP,5k RPM,8 pos.turret,coolant,updated AC drives,1988,#TK-19130

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #CHNC-III, CNC lathe, Fanuc 18T, Harmatic 7.51 barfeed, chip conv., 1997, #147279

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Hardinge Cobra 65, 2-1/2", 10"3-jaw, Fanuc 21iT, 15 HP, 4500 RPM (2)

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Cobra 65, Fanuc 21iT,22"swing,31"cut length,4500 RPM,10"chuck,1999

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Hardinge Conquest 42, Fanuc 0T, 16C/A2-5 spdl., 12 sta.tur., Ser.#CS-969-C

Iverson & Co Inc, Des Plaines, IL 847-299-2461 (Fax 847-827-5303) Terry Iverson

Hardinge Conquest 42, Fanuc OM, sub-spindle, milling, bar feed, chip, 1991

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Hardinge Conquest 42, CNC lathe,Fanuc OT,live tool,subspdl,chip conv,#146478

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Hardinge Conquest 42S, 16C,1.625"spdl.hole,5k RPM,tlstk,Fanuc OT,'00,#dk-19117

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Conquest 51, Fanuc 18T,20"x24"cc,20 HP,conv,4200 RPM,2"bore,1995,#2985

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hardinge Conquest #CS-42, 4-Axis,sub-spdl,10 turret w/5 live tools,bar feed,tlstk,'91

Carney Machinery Co, Wilmington, DE 302-571-8382 (Fax 302-571-9538) Mike Carney

Hardinge Conquest #CS-GT, Fanuc 18T, 5 HP, 4"chuck, 11.76"swing, 6000 RPM, 1996

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Hardinge Conquest #GT, Fanuc 18T, 5C/A2-4 spdl., parts catcher, Ser.#GT-717

Iverson & Co Inc, Des Plaines, IL 847-299-2461 (Fax 847-827-5303) Terry Iverson

Hardinge Conquest #SP, CNC,Fanuc OT,live tooling,6'Hardinge barfeed,1990,#148007

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Hardinge Conquest #T42, Fanuc 18T, 16C/A2-5 spdl., 12 sta.tur., chip, Ser.#SG-1027B

Iverson & Co Inc, Des Plaines, IL 847-299-2461 (Fax 847-827-5303) Terry Iverson

Hardinge Conquest #T42, Fanuc 18T, barfeed, sub-spindle, milling

Solomon Machinery, Eastpointe, MI 586-774-2030 (Fax 586-774-2801) Russ Solomon

Hardinge Conquest #T42BB, Fanuc 18T,20C/A2-6 spdl.,12 sta.tur.,chip conv.,Ser.#SG-224

Iverson & Co Inc, Des Plaines, IL 847-299-2461 (Fax 847-827-5303) Terry Iverson

Hardinge Elite #II-8/51, F 18iTB,2"bar,8"chk,6K rpm,12-tl,live/turn,C-Axis,chip,'06

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Hardinge Elite #II-8/51, Fanuc 18iTB,21"swing,13.4"turn,live tooling,sub-spdl,'06

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hardinge #T42 Conquest, CNC lathe, 1998

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

Harrison Alpha, CNC/man.H.D.lathe,GE Fanuc,3"bore,9"steady rest,tlstk,tool post,'96

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Harrison Alpha #460, 12"chuck, 18"swing, 60"cc, 3"bore, 15 HP, Fanuc control, 1996

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Heid #S500-BL-3, CNC 4-Axis turning center lathe, loaded with tooling, 1991

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Heyligenstaedt, 28.3" x 160"cc, 18.7"OCS, 75 HP, CNC, under power

American Machinery Co Inc, Newtown, CT 203-520-8435 (Fax 203-426-2747) Bill Buckens

Hitachi-Seiki #7NF-1100, Fanuc 21T,34.6"sw.,50"cc,8 sta.tlng.,25"chk,10"spdl bar,600rpm,60 HP,tailstock,1981,#2549

Hoppen-Webster Machinery Inc, East Peoria, IL 309-698-5564 (Fax 309-698-5562) Ken Webster

Hitachi-Seiki #CA40, Seicos Multi L 4x,C&Y-Axis,27.6"x39.4",8 ATC,16"3-J,4.7"bore,'98

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Hitachi-Seiki HiCell #20, C-axis,Y-axis,12 ATC,8"chk,Seicos L,chip conv,1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-Seiki HiCell #20, Seicos L Multi CNC,C&Y-Axis,10 sta.trrt,12 ATC,8"chk,1995

On Target Machine Brokers LLC, Watertown, CT 860-483-0905 () Kevin Brewster

Hitachi-Seiki HiTec-Turn #23S III, 8"chk,Seicos L Multi,3"bore,3200 RPM,chip,'96

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Hitachi-Seiki #HT-15, Twin Spindle CNC Lathe, Ser.#HT15376, Seicos CNC control

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Hitachi-Seiki #HT-15, Twin Spindle CNC Lathe, Ser.#HT15612, Seicos CNC control

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Hitachi-Seiki #HT-20, tailstock,turbo chip conv,Omnibar barfeeder,Yasnac LX2,2"bar

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Hitachi-Seiki #HT-20SII, 15"sw.,2"bar,8"chk,tlstk,Seicos Multi CNC,S/N 2645,#21074

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hitachi-Seiki #HT-30J, CNC lathe,21"sw,32"cc,12 tools,3"bars,3000 RPM,Seicos J300L,'99

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Hitachi-Seiki #HVP-23, LNS Quick load barfeed,tool probe,parts catcher,no tlstk,v/good

J Raymond Machinery Sales LLC, Painesville, OH 216-952-8149 (Fax 440-352-1259) John Raymond

Hitachi-Seiki #HVP-23J, 17.7"sw, 24.8"cc, Seicos LY, chip conv., 1996, #138186

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Hitachi-Seiki #TF25, 10"chk,40"cc,Seikos 10L Multi CNC,10 sta.trrt,25 HP,'97 (2)

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-Seiki #TF25, Seicos 10L,23.6"swing,2.5"bar,10"2-jaw hyd.chk,tailstock,1997

On Target Machine Brokers LLC, Watertown, CT 860-483-0905 () Kevin Brewster

Hurco #TM6, tailstock, parts catcher, chip conveyor, 16C collet chuck, 6"3-jaw chuck

J Raymond Machinery Sales LLC, Painesville, OH 216-952-8149 (Fax 440-352-1259) John Raymond

Hurco #TM6, 2-Axis, 12 turret, T.S., 6"chuck, MAX Touch control, 2005

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

Hwacheon Cutex #160, F 0i,6k RPM,21.6"swing,2.2"bore,6"chk,tooling,2005,#3025

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hwacheon Cutex #240, 22.8"swing, 24"centers, 12 position QC turret, 2006

Nationwide Machinery Sales, Troy, MI 248-740-9700 (Fax 248-740-9684) P. Dockeray

Hwacheon Cutex #240ASMC, Fanuc 0iTC,Collet chk,22.8"sw,15"x23.6"turn,sub-spdl,'06

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hwacheon Cutex #240ASMC, Fanuc 0iTC,Collet chk,22.8"sw,15"x23.6"turn,sub-spdl,'06

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hwacheon #Hi-Eco 21HS, F 18T,C-Ax,mill.hds,8"chk,2.4"bore,6k RPM,22.8"sw,'98,#B1319

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hwacheon #Hi-Eco 21HS, Fanuc 18T,8"3-Jaw chk,live tlng.,12 pos.tur.,chip,2"bar,1998

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Hwacheon #Hi-Eco 31A, OTC,10"chk,3.6"bore,20"sw,43"BC,3500RPM,10 trrt,30HP,chip,'96

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Hwacheon Hi-Tech #200A, Fanuc 0iTB,2",tailstock,chip conveyor,robot interface,2001

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Hwacheon Hi-Tech #200A, Fanuc OiT,15.7"sw.,15.7"cc,48"chk,2.95"bore,chip conv,2008

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Hwacheon Mega #95, 32"chuck,39"x 196"gap bed/flat bed design CNC lathe,2002

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Hyundai #HIT-15, CNC lathe,17"x23",collet chk,prog.tlstk w/hyd.quill,3-jaw,'01,#A2088

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

Hyundai #HiT15S, 8"chk,2.44"bore,4500rpm,8 pos.trrt,tlstk,Siemen ctrl,'95,#HB-19232IP

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hyundai #HIT-15S, Hitrol 840C,17.3"swing,20"cc,4500 RPM,8"chuck,chip conv,2000 (2)

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Hyundai #HIT-18S, 17"x 25",10"chuck,3600 RPM,20 HP,Iemca B.F.,Siemens 840C,1995

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

Hyundai #HIT-18S, Siemens Sinumerick ctrl,10"chuck,2.75"thru hole,7.09"X,20.08"Z

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Hyundai #HIT-18S, CNC lathe, 10"chuck, Siemens ctrl., 17.32"x19.70", 3600 RPM, 1996

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Hyundai Kia #SKT2500MTSY, 18iT,10"/8"chk,3.5"/2.6"bore,30"sw,C-Axis,3500rpm,'07

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Hyundai #SKT-300MS, Fanuc 18iT, 12" Chuck Main, 8" Sub, 2007

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Ikegai #TUR-26, turn.center w/live tlg,Fanuc 18T,3"bar,tlstk,full C-Axis,12"chk,'96

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Index #V200, vert.chucker,5"chk,12.7"swing,C-axis,live,7500 RPM,gantry,1999

AMTAC Corp, Erie, PA 814-838-4629 (Fax 814-838-4557) Russ Taccone,Jr.

Index #V200, Index C200-4 CNC,10.5"sw,7.87"turn lgth,T-slot tool tbl,1998,#22878

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Index #V200, 2-axis vertical turning center,Fanuc 16T,8"pwr chuck,14 pos.turret

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Index #V200, CNC lathe,Index C200-4,16.54"swing,7.87"turn dia,20.47"X,7.87"Z (3)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Index #V250, 2-axis vertical turning center, Fanuc 16T, 12 position turret

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Intertech #60-225, DH65 bar loader, APC, collet chuck, 2002

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

J & T #TTB-36BL, 4.625"bar, 15"chuck, 60"centers, 2007

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Johnford #TC35, Fanuc 18TB,10"3-jaw,22.83"sw.,3"bar,3500 RPM,10 pos.trrt,'99,#2994

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Jones & Lamson #4512 Combi,Fanuc OT,5.25"hole,1200rpm,40hp,rblt/retro '02(11319)

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

J & L #TNC-4515, Fanuc OT, 4.5"bore, 15"3-jaw hydraulic chuck, chip conveyor

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Kia KiaTurn #21, Yasnac Control, 8" Chuck, Barfeed, 1997

Dominion Air & Machinery Co, Roanoke, VA 540-344-8733 (Fax 540-344-3830) Dave Gauvin

Kia #SKT15, 6"dia.,9"lgth,21.7"swing,1.77"bar cap,6k RPM,Yasnac LX-3,1999

Star Equipment Co., Inc., Union Lake, MI 248-366-6400 (Fax 248-366-6500) Chris Starnes

Kia #SKT15, Fanuc 0iTB,1.77"bar,6"chk,16"lgth,12 tools,15HP,tlstk,tool presetter,'05

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Kia #SKT-15-E, 1.77"bar, 6"chuck, 6000 RPM, 15 HP, 12 tools, 2000

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Kia #SKT21, Fanuc Oi-TB,tool presetter,chip,21.3"sw,16.1"turning,A2-6,4k RPM,'04

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Kia #SKT21L, 2"bar,8"chk,21"max.lgth,4k RPM,12 pos.trrt,tlstk,Yasnac,'99,#HB-18895

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Kia Turn #15, 6.5"chuck,14"cc,Yasnac LX3 control,12 position turret,1995,#8112

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Kitako Variant Turn, CNC, 23.4"sw.ovr.bed,31.9"cc,10"dia.turn,25.2"turn lgth,8.66"X,26.8"Z,30-3000 RPM,Fanuc 6TB,12"3-Jaw chk

Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Denny Hoff

Kitako #VT4-200, multi-spindle CNC lathe, Ser.#84098, Fanuc model 18TB CNC control, 2004

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Lansing 'G' Mdl.NV-30,30"x 24"chkr,30/40 HP,(2) 25"hyd.F&R chks,9-7/8"spdl.bore

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Leadwell #LTC-10AP, turning center,Fanuc OT,6"3-jaw chk,12 sta.trrt,1996

Scott Machinery, McClellan, CA 916-638-7718 (Fax 916-638-2450) Deanna Payne

LeBlond #3220, Dynapath, w/Delta 40 control, 4"hole, 18"chuck, 1974

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

LeBlond #50/30 Raised 4625NK Tape Turn I, F-18iT,50"sw.,30"/33"OCS,7-1/16"spdl hole

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

LeBlond Tapeturn, Fanuc OTC,32"sw.,360"cc,1075 RPM,4.375"bore,tlstk,chip conv,'80

Opincar Machinery, Smyrna, TN 615-459-7983 (Fax 615-223-9820) Tom Opincar

LeBlond, 50"x 252",29"c/s,Siemens 850,100 HP,24"4-jaw,steadys,1980/2000

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Lodge & Shipley Profiturn 50, 40"x112",7"hole,850 RPM,tlstk,Fanuc 18iT,'90,#15104

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Matteo #AD2460, 96"x 242",73"OCS,4 way bed,134 HP,Siemens CNC,2010,#20730

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

Matteo #AD2600, 102"x547",88"OCS,137 ton cap,4 way bed,134hp,Siemens CNC,#20729

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

Mazak #100-IISY, Fusion,18.5"sw,6k RPM main/sub,10k RPM rotary,synch.tap.mill hd,'03

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Mazak #30 Slant Bed, CNC turning lathe

Sadler Machinery Sales, Rochester Hills, MI 248-770-9871 (Fax 248-373-1766) Robert Sadler

Mazak #610 Multiplex, Mazatrol T-32,twin spdl,live toolng,13.78"swing,1.65"bar,1993

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mazak Dual Turn 20, T-Plus control

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak Dual Turn 20, 12.6"swing,19"Z,49"btwn spdls,(2) 8"chks,2.4"HIS,640T,2004,S29815

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak Integrex #100SY, full Y/B/C axes,1.65"bar,sub spdl,640,LNS mag ldr,40ATC,2000

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Mazak Integrex #100Y, full Y/B/C axes,1.65"bar,640,40ATC,gantry load/unload sys,2000

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Mazak Integrex #200IV ST, Mazatrol Matrix CNC,8"chk,2.5"hole,26"swing,2007,#76099

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mazak Integrex #200IVS, Mazatrol Matrix CNC,8"chk,2.5"hole,26"swing, barfeeder, 2007, many holders included!!!

Machinery Inc, Sherbrooke, QC 819-346-2369 (Fax 819-346-5217) Stephane Gourde

Mazak Integrex #200IVST, 3"bore,8"chk,60"cc,80 ATC,Mazatrol Matrix,chip,C-Axis,2006

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Mazak Integrex #200IVST, Matrix ctrl,26"sw,(2)8"chk,2"spdl,XYZCB-Axis,2011,#30602

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Mazak Integrex #200IVST/1500, Matrix,8"/8"chks,3"/3"bore,27"sw,60"BS,C-axis,2007

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Integrex #200SY, Mazatrol 640MT,8"chuck,6-Axis,40 ATC,sub-spindle,2001

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mazak Integrex #200SY, CNC lathe, 10" chk, 26" sw, 2" bar, 5-axis, Max.640MT,'99

H & H Machinery, San Ramon, CA 925-577-5356 (Fax 925-401-9526) Tim Hollis

Mazak Integrex #200SY, Maz. 640MT,8"& 6"chuck,21.25"sw,2.04 bore,40atc,conveyor,'01

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mazak Integrex #200Y, Mazatrol 640MT,SMW bar feeder,parts catcher,chip conv,2000

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak Integrex #300IVST1500, Mazatrol Matrix, 40 ATC, 2006

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Mazak Integrex #30Y, T-Plus control, chip conveyor

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak Integrex #50Y, T-Plus control, 100"long, 120 ATC, steady rest

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak Integrex #E410H, CNC lathe

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Mazak Integrex #E410H, Fusion 640M,12"chk,60"cc,40atc,5-Ax,2500hrs,'06,#B1300

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak Integrex #E410H, CNC M/T,5-Axis,24"sw.,24"cut,3"bar,60"cc,tlstk,live tools,30 HP,5k RPM,40 ATC,6"chuck,Fusion 640,2005

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #M4, CNC bed lathe, Fanuc 5T 13"3-jaw chuck, 2 turrets, tailstock

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-538-0367 (Fax 616-878-3736) Jessica Kolenda

Mazak #M4, CNC bed lathe, Mazatrol T-1, 12"3-jaw chuck, front & rear turrets, tailstock

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-538-0367 (Fax 616-878-3736) Jessica Kolenda

Mazak #M4N/1000, T-Plus,12"chk,3.1"bore,22"sw,40"BC,2200 RPM,8/6 trrt,1997 (2)

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #M5, 24"swing, 80"cc, 6"bore, Mazatrol T-1 control 30 HP, 1982

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Mazak #M5-2000, 3.5"bar,82"cc,24"swing,4.1"bore,2200 RPM,30 HP,8 6 tools,1985

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Mazak #M5-3000, Fanuc CNC,12"chuck,5"hole,120"cc,tailstock,remfr,1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Mazak MULTIPLEX #420, twin spdl,10"x46",8"chks,Renishaw Probe,T32-4 CNC,1990 (3)

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak Multiplex #6200, 2-spdls/trrts,milling,gantry robot,Fusion 640T,2004,#19733

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak MULTIPLEX #630 Twin Spdl, 22"sw,C-Axis,live tlg,Mazatrol 640T,1999,S28624

Perfection Industrial Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Dept. Sales

Mazak Nexus #QTN450II/2000, Matrix,18"air chk,33"sw,83"BC,1600RPM,12 trrt,chip,2008

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Powermaster 3000, F 6TB,9.5"bore,24"4-jaw front chk w/12"hole,25"3-jaw air chk

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Mazak #QT10, CNC lathe,8"3-jaw chuck,1.57"bar cap,8 stations,Mazatrol control,#8888

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Mazak #QT12C, lathe, Flex GL-50C robot, 15.75"swing, 4000 RPM, 1994

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Mazak #QT15N, 8"chuck,2"bar cap,tool setter,8 trrt,4500 RPM,tailstock,T-32B,1992

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Mazak #QT15N, CNC turning center,8"chuck,chip conveyor,tool eye,Mazatrol T32-2,1988

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Mazak #QT15N, CNC turning center,8"chuck,chip conveyor,tool eye,Mazatrol T32-2,1989

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Mazak #QT18N, T32B control, 10"chuck, 2.75"thru hole, 73.09"X-Axis,20.08"Z-Axis

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak #QT18N, 7.09"X,20.08"Z,A2-6 spdl.nose/3.15"spdl.bore,Maz.T-Plus,1995

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt

Mazak #QT20-N, CNC chucker, 8"chuck, T Plus control, gantry loader option, 1998

Roberts Machinery Sales, Ferndale, MI 248-543-4466 (Fax 248-543-7004) Kimball R Roberts

Mazak #QT20N, Maz. T-Plus,17.32" sw.,2.44" bore, 8" chk, 8 pos. tur.,gantry unload,'95

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mazak #QT28C, T-32,20"sw,10"chk,3000 RPM,30 HP,chip conv.,tool probe,1990,#9123

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Mazak #QT35, T-32, 12"chuck, 3", tailstock, 1989

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Mazak #QT8, 1.625"bar, 8"chuck, 4500 RPM, 8 tools, Mazatrol T2, 1986

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Mazak #QTN200M-II, 26.5"swing,live milling,C-Axis,12 pos.turret,bar feed,2008,#21463

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak Quick Slant #30, Cam T-4 control, 4-axis, 10"chuck, chip conv., 1986

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Mazak Quick Turn #250, 2-Axis CNC lathe,universal,23"sw,15.7"cut,2"bar,20"cc,4k RPM,20 HP,12 tools,8"chuck,Mazatrol 640T,1999

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak Quick Turn #250, Maz.Fusion 640,23"swing,8"chk,parts catcher,CC,2002,#30907

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Mazak Quick Turn #35N, 20"sw.,15-3/4"cc,12" 3-jaw hyd.chuck,3-1/2" spdl.bore,conveyor,ID/OD tailstock,1990,#2873

Hoppen-Webster Machinery Inc, East Peoria, IL 309-698-5564 (Fax 309-698-5562) Ken Webster

Mazak Slant Turn #15, CNC lathe, Fanuc 6T, 8"3-jaw chuck, chip conveyor

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-538-0367 (Fax 616-878-3736) Jessica Kolenda

Mazak Slant Turn #35ATC M/C, 18"sw,60"cc,Mazatrol T-3,live tlg,tlstk,1988,#147534

Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Mark Piedmonte

Mazak Slant Turn #35ATC M/C Multi-Axis, Mazatrol ctrl,12"3-jaw hyd.chk,chip conv,'89

Manufacturing Solutions, Costa Mesa, CA 714-545-0940 (Fax 714-850-8795) Mike Dieveney

Mazak Slant Turn #40N, CNC lathe,Maz.T-1,60"cc,12"chk,live tooling,chip conveyor

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Mazak Slant Turn #40N, T-32 control, 2.76"bar capacity, 12"chuck

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak Slant Turn #40N, ATC mill center,12"chk,80"cc,80 ATC,40 HP,Fanuc 11T,'89

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Thomas Lowkes

Mazak Slant Turn #50, ST50-2000U,31.75"swing,80"cc,15"chuck,15 pos.turret,T2 ctrl

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Mazak Slant Turn #60, CNC combination lathe, T-1 control, 30"chuck, 2-axis, 40 HP, #L215094

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

Mazak Slant Turn #60N, 6TB,14.75"bore,36"sw,102"BC,500 RPM,15 trrt,60HP,chip,1983

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Slant Turn #60N, Fusion,14.75"hole,36"sw,102"BC,500 RPM,15 trrt,60 HP,chip,2011

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #SQT-10, Maz.T-32, 17.13"sw, collet chk, tailstk, chip conv, 1993, #147702

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Mazak #SQT-10, Mazatrol T-32B control, 17.13"swing, 1993, #76441

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mazak #SQT-15MS, turn.center w/live tlg,sub-spdl,2"bar,full C-Axis,tool setter,'97

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Mazak #SQT-18M, CNC turn.center,live tlng,tailstock,Maz T-Plus CNC,25HP,10"chk,1996

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Mazak #SQT-200, Fusion 640T, 5000 RPM, no tailstock, low price, 2000

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mazak #SQT250MSY, 640,10"/6"chucks,3.4"bore,4000/4000/4500 RPM,12 turret,2002

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Super Quadrex #250, 2.5"bar,10"chuck,4k RPM,12+8 tools,Mazatrol 640TE,2000

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Microcut #BNC40120, 40"x120",Fanuc OiTD,1480 RPM,4-pos.turret,steady rest,'12,#21351

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Microcut, 40"x 160",front & rear turrets,live milling,6"bore,Fanuc OiTD,2012,#21350

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mighty Viper #T6 26/120, OT,20"chk,6.6"bore,26"sw,120"BC,1k RPM,8/6 trrt,SR,chip,2003

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mighty Viper #VT-15, 15"sw,13"centers,6000 RPM,10 tool,Fanuc OTD,2002,#15080

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mighty Viper #VT-20, 2-Axis,23.62"sw,19.68"cc,Fanuc 18T,8"chk,chip,2000,#146990

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Mighty Viper #VT-25B, 20"sw,28"centers,4000 RPM,tailstock,12"chk,12 tool,tailstock,25 HP,Fanuc 18T,2002,#15079

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Milltronics CNC, 27"x 78",live milling,tailstock,6"bore,front/rear chucks,2010,#21424

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Milltronics #ML17, 17"x40", CNC lathe, no tailstock, 4-Jaw chuck, 1999

Astra Tool Co Inc, Grapevine, TX 817-481-6528 (Fax 817-421-5960) David Austin

Milltronics #ML17, 17"x40",CNC/Teach/Manual,Centurion 6,to 2600 RPM,7.5 HP,v/nice

Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Fax 973-992-8334) Michael/ Dave

Mitsubishi #M-T35E, 35mm, 6-spindle, cross slide, Fanuc 15TT, CNC pick-off, 1997

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Mitsubishi #M-T42E, 42mm, 6-spindle, cross slide, Fanuc 15TT, CNC pick-off, 3/1997

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Mitsubishi #M-TC10B, Meldas 325LGV,23.6"x 41.2"cc,used 4600 hr,1999 (9)#8845

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Miyano #34S, CNC,1.5"bar,2-axis,10 HP,collet nose,sub spindle,1991,#165673

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

Miyano #7BC, CNC lathe, 10"3-jaw hyd.chk., Fanuc 6TB, tailstock, 19"swing, 17.75"cc, 1982, #140026

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Miyano #ANC45S, Multi-Task Turn CNC Turning Center

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Miyano #BNC34C, Fanuc CNC, chuck, chip conveyor, s/n #321620, #UD100029

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick

Miyano #BNC34C, Fanuc 0T, 6"chk, 1-1/4", collet chuck, tailstock, LNS 6.35 HS-4.8

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Miyano #BNC34C, Fanuc 0T, 6"chk, 1-1/4", collet chuck, tailstock, LNS 6.35 HS-4.8

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Miyano #BNC34S, Fanuc OT,LNS Hydrobar brfd,5000 RPM,5C collet chk,tlstk,'94,#148377

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Miyano #BND-42TR, CNC lathe, Fanuc 18T, 2002, #76260

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Miyano #BND51C, Fanuc 18T,2.5"bar cap,4000 RPM,20 HP,LNS QL barfeed,clean,1998

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Miyano #BND-51C, Fanuc 18T, 6"chuck, 2-1/2", LNS Quick load, 1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Miyano #BND51S, CNC lathe,Fanuc 18iTB,8"chuck,2"hole,20"swing,2006,#76085

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Miyano #JNC45, 18.5" x 18.5", Fanuc control, stock #76013, 2-available

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Miyano #LP-31, Fanuc 18T, 8"chuck, 2", robot loader, Westek table, low hours

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Monarch Ultra Center,Fanuc 15TT,26"sw,63-3200rpm,twn.hdstk,15"ck,25hp,'93(5376)

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Monarch Ultracenter, Fanuc 15,opposed 15"chucks,live twin turrets,1993 (2)

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

Mori-Seiki #CL15, M8-T8,18.5"swing,1.7"bore,6000 RPM,13"Z,conv,12 ATC,1996,#2900

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #CL-15, 18.5"swing,1.77"spindle bore,12 pos.turret,1.3"bar,Fanuc 18T,presetter,1996

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Mori-Seiki #CL150, Mit,1.3"bar,6"chk,15.7"dia,11.9"lgth,10hp,12 tls,APC,BF int,'98

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Mori-Seiki #DL151MC, 6-Axis,subspdl,livtls,"sw/ct/bar/cc16/7.8/1.7/7.8,4krpm,2colchks,24tls,partscatchr,bfdrFanuc MSC 501,'00

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mori-Seiki #DL-151MC, MSC501 ctrl,twin spdl/turret,Iemca Boss barfeeder,tool setter

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Fax 248-926-8499) Randy/ Jeff/Chris

Mori-Seiki #DL151Y, 16.5",9.8"Z,Live Tl,Robotic Part Ldr,MSC-501 CNC,1999,#S28211

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #DL-20, twin spindle lathe,chuck size (left/right) 8"/6"max.dia.,1997

U S Equipment Co, Detroit, MI 313-526-8300 (Fax 313-526-5303) Sales

Mori-Seiki #L100H, Fanuc OT,1.3"bar cap.,barfeed,4k RPM,16 pos.trrt,sliding hdstk.

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mori-Seiki #LL7B-3500, Fanuc 6TB,34"manual chuck,42.9"swing,8.5"bore,conveyor,1984

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #LL8B/2500, 10.5" Bore, 50" Swing, 120" CC, Fanuc 15M, 1990

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Mori-Seiki #LLT, F OT,F&R trrts,flat bed,46"sw.,26"z,4.1"bore,chucker,40 HP,'96,#3028

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #MT2500SZ, 22"swing,milling spdl,40ATC,C/Y/B-Axis,Fanuc 16T,'03,#21236

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #MT4000AS, 37"sw.,81"lgth,turret,milling & sub-spdl,MSG502,2002,#20109

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #NL-3000Y/1250, MSX-850, 12"Chk, Steady Rest, Y-Axis, Milling, 2008

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mori-Seiki #NL3000Y/1250,4-axis,11"X,4.7"Y,53.9"Z,12" B212 3-jaw,MSX-850III cnc,'08

Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Fax 631-586-3612) Joe Shapiro

Mori-Seiki #NT-1000, Mori-Seiki CNC,6"chuck,2"hole,10.5"cc,2010,#76504

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mori-Seiki #NT4250DCG/1500SZ, 28.7"sw.,2 spdl,trrt,ATC,Fanuc i35-A5,12"/16"chks,new

Products Corp., Portland, OR 888-800-2232 (Fax 503-244-0589) Fred Pfaffle

Mori-Seiki #NZ1500T2Y, 6"main & sub, Y-Axis, 2 turrets, LNS Quickload, 400 hours, 2011

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Mori-Seiki #RL-203, 2 spdls,(2) 8 sta.turrets,loader/stocker,MSG-803,2003,#21541

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #SL-15, Fanuc MF-TF OTC, 6000 RPM, 6" Kitagawa Chk, 5C Collet Chk, 10 HP, 1.77" bar cap, 17.7" x 23.4" cc

Infinity Machine Tool Sales I, Anaheim, CA 714-693-4800 (Fax 714-693-4808) John Balducci

Mori-Seiki #SL-15, Fanuc 0T,1.5"bar,6"chk,6.3"dia,20.7"lg,15HP,6000RPM,12-tls,chip,'92

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Mori-Seiki #SL-150, CNC turning center w/live tlg,Mori/Fanuc MSC-518,5k RPM,'97

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Mori-Seiki #SL-150SMC, MSG-501,24"swing,20"cc,live milling,sub-spdl,chip,tlg,'97

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Mori-Seiki #SL150Y, MSC-518 ctrl,1.7"bar cap.,collet chk,6"3-jaw,tooling pkg,'97

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mori-Seiki #SL-154Y, 26.8"swg,22.8"lgth,1.77"hole,C-Axis,live tooling,Msg-504,2003

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #SL-15M, 3-axis CNC lathe,Fanuc 10T,full C-axis,live tooling,17.72"swing,1.6"bar,5k RPM,chip conv.,good,1992

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #SL-1A, 16C power collet chuck, tailstock, 12 turret, Yasnac

Carney Machinery Co, Wilmington, DE 302-571-8382 (Fax 302-571-9538) Mike Carney

Mori-Seiki #SL-20, Fanuc OTC,17.7"sw,24"cc,10hp,4500rpm,10 tl.tur,2.2"bore,chip conv,'91

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Fax 952-944-0043) Harry Youtsos

Mori-Seiki #SL-253BMC/500, MSG-501 Mapps CNC, 10"chuck, live tooling, 2000

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

Mori-Seiki #SL-25MC/500, CNC lathe, MF-T6 control with live tooling, 1992

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Mori-Seiki #SL-25MC/500, Fanuc OT,2.63"bar,10"chk,13.4"dia,20 HP,milling,barfd.'90

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Mori-Seiki #SL-3, Yasnac CNC w/CRT, good condition, cheap, #UD57409

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick

Mori Seiki #SL-35B, 23.6"sw.,40"cc,10 sta. tlng.,18"chuck,3-1/2" bar,2500 rpm,30 HP,chip conveyor,1989,#2869

Hoppen-Webster Machinery Inc, East Peoria, IL 309-698-5564 (Fax 309-698-5562) Ken Webster

Mori-Seiki #SL65MC, 16T,18"chk,6.6"bore,31"sw,35"BC,.001°C-Axis,1010 RPM,chip,1996

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #SL6A, 4"bore,21"3-jaw,35.43"cc,1100 RPM,TS,Fanuc 6TB,3 spd gearbox,'81

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Mori-Seiki #SL-7, 35"swing, 63"B/C, Fanuc 6TB CNC, 1986

Opincar Machinery, Smyrna, TN 615-459-7983 (Fax 615-223-9820) Tom Opincar

Mori-Seiki #SL-75A, 36"swing,69"cc,50 HP,21"chuck,tailstock,Fanuc 10T,1988,#20577

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #SL-8F, turn.center,51-1/2"sw.,Fanuc 6TB,chip,39"hyd.3-jaw,8.5"hole

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

Mori-Seiki #TL-5, CNC lathe,Yasnuc 2000 GII ctrl,18"swing,100"cc,A-8 spdl.nose,12"3-jaw chuck,1400 RPM,30 HP,study rest,1981

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

Mori-Seiki #TL5B-2000, Fanuc 6TB,4.1"spdl bore,7"- 8"X,72"Z,tailstock,chip conv,1981

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Mori-Seiki #ZL-150S, CNC turning center,sub-spindle,dual turrets,IEMCA barfeed,2000

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Mori-Seiki #ZL-153SMC, Mori MSG501 Ctrl., 2-Turrets, milling, 2-spdls, 2003, (3) Avail.

R A B Industries Inc, Washington, MI 586-752-0090 (Fax 586-752-0030) Rod A Blasius

Mori-Seiki #ZL-15S, Mori MF-D6,4-axis,1.6"bar,2.05"spdl bore,FMB 5-42 barfeed,#25619

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Mori-Seiki #ZL-200, 4-axis CNC lathe,MSG 805 MAPPS Conversational programming,8"3-jaw chuck,4k RPM,good,2002 (2)

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #ZL-200, lathe, 8"chuck, tool presetter, Mapps, 2"bar, 2002 (2)

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Mori-Seiki #ZL-200SMC, MSC-501, 6-Axis,live milling, twin turrets, bar feeder

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mori-Seiki #ZL250/600, 4-Axis turn.center,Fanuc FS-18iTA,26"cc,2.87"bar,3500 RPM,'99

Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Fax 631-586-3612) Joe Shapiro

Mori-Seiki #ZL-250SMC, 26"swing, sub spindle, live milling, bar feeder, 2000

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mori-Seiki #ZL-25A/500, Fanuc 11TT,20.5"sw,25.4"cc,4-Axis,tlstk,chip conv,'89,#148076

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Mori-Seiki #ZL-25B/1000, 40"cc,10"chuck,twin turrets,Fanuc 15T,tailstock,1991

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mori-Seiki #ZL-25MC/500, Fanuc OTT,20.47"swing,10.24"turn.,10"chuck,barfeed,1992

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

Mori-Seiki #ZL-25MC/500, live tool, 10"chuck, 3.5"bore, LNS HydroBar, chip, 1992

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Mori-Seiki #ZT2500Y, 2.5"bar,(2) 10"3-jaw chucks,live tlg,14.9"swing,30 HP,2001

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Motch #125TS, VNC Vertical lathe, Fanuc 21iT, 12 Tools, 24"Chuck, mint, 2001

R A B Industries Inc, Washington, MI 586-752-0090 (Fax 586-752-0030) Rod A Blasius

Murata #MW120G, CNC,Fanuc Ctrl,twin gantry,auto load,chip conv,8-sta.tur,#15667

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Nakamura #3BSL, 2-axis CNC lathe,Fanuc 11TE,27.16"swing,15.57"turn.dia.,2-1/2"bar,10"3-jaw chuck,excellent,1986

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Nakamura-Tome Slant Jr., CNC lathe, 21.65"swing, 11"cc, 6"chuck, Fanuc 6T, 1989

H & H Machinery, San Ramon, CA 925-577-5356 (Fax 925-401-9526) Tim Hollis

Nakamura-Tome Slant-4, CNC, 33.86"sw.ovr.bed,20.47"sw.ovr.saddle,12.20"X,23.23"Z travels,9-3000 RPM,Fanuc 6TB,12"3-Jaw chuck

Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Denny Hoff

Nakamura-Tome #Super NTY3, 6.89"turn dia,23.15"lgth,1.65"bar,Fanuc 21iA,12 sta.tur,'08

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Nakamura-Tome #TMC20II, CNC lathe, 15.75"x 18"cc, Fanuc 18T, 8" chk, 1993

H & H Machinery, San Ramon, CA 925-577-5356 (Fax 925-401-9526) Tim Hollis

Nakamura-Tome #TMC4, Fanuc 6T,21"sw,60"cc,3500 RPM,12"chk,10 sta.,VDI hldrs,1985

Haider Machinery Inc, Eden Prairie, MN 952-975-4975 (Fax 952-975-4977) Gary Haider

Nakamura #WT-250, CNC lathes,Fanuc 18iTB,6"chuck,2.5"hole,2004,#76243

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Nakamura-Tome #WT300MMY, 7-Axis,8"chks,2.55"bar,25 HP,live tl,Fanuc 18iTB,'06,#9228

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Nardini Genius #250, 20"x 60",10"chuck,Fanuc 20TA,RS-232 port,tailstock,1996

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Southwestern Industries machines FOR SALE http://usedprototrakmillsandlathes.com

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Okuma Cadet, 4200 RPM, 2.2" hole, OSP 5020L, 10" 3-jaw, 1993

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Okuma Cadet Big Bore, CNC turning center, OSP 5020L control, 10"chuck, 1995

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Okuma Cadet #LNC-8, OSP700,15.7"swing,20"cc,8"chk,probe,IGF,2"bar,15 HP,'96,#3019

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma Captain #L470BBM, OSP P200,live tlg,Big Bore,24"swng,12"chk,tlstk w/26"cc,'09

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Captain #L-470M, 12"chuck, 4.33"bore, Okuma THINC control, 2002

Superior Machinery, Burt, MI 989-770-4827 (Fax 989-770-4873) Keith McKay

Okuma Crown BB, OSP 700, Chip Conveyor, Tailstock, 1997

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma #ES-L8, CNC lathe,2-Axis,18"swing,10"cut,2"bar,19"cc,10 HP,4200 RPM,8 tools,tailstock,8"chuck,OSP-U10L,2000

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Okuma Impact #LU15-2ST/350, OSP7000L CNC,30 HP,10"chk,14.96"sw,75-4500 RPM,1996

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Okuma #L1420, OSP 700L,10"chk,14"turn.,28"cc,3500 RPM,12 sta.trrt,#5MT,1997,#3005

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #LAW 2S, 4-axis, 75 HP, 3000 RPM, OSP U100 controls, (2) available

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LB-15, OSP 5020, Chip Conveyor, Tailstock, 1991

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma #LB-15, 15.75"sw,19"length,2.2"bore,A2-6,4k RPM,OSP 5000L,loader,tlstk,'87

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Okuma #LB15-IIMATC-Y, 10"chuck,2-5/8"bore,32 ATC,prog.T.S.,live mill,OSP7000L,1996

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Okuma #LB-35II, 80"centers, OSP5020 control, 15"Kitagawa chuck

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LB-45 Big Bore, OSP P-200,10.23"bar,22" hk,tlstk w/40"cc,60 HP,low hrs,'08

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma #LC20, 1.77"bar, 8"chuck, 8 tools, OSP 5000L,1998

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Okuma #LC20-2SC, CNC 4-axis Simulturn turning center,OSP5000L-G,15-3/4" sw.,1988

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Okuma #LC30, OSP-3000L,12"chk,2.7"bar,30 HP,12 pos.turret,chucker,chip conv,nice

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma #LC40-1SC, 23.62"swing,39"cc,OSP-5000 CNC,12 pos.turret,tailstock,#21216

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Okuma #LC40-2ST, 4-axis,60hp,2500rpm,ready to be rblt.& retrofit w/new Okuma P200 Ctrl.

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LC50-25C/1250, reblt/retrofit w/Okuma Think P200 ctrls,50"cc,75 HP 4-axis

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LC50-2ST/750, OSP 7000, 32"chuck, chip conveyor, 1999

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma #LFS-10M-2 Spindle w/milling, auto load/unload,6"chucks,6k RPM,clean,2006

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma #LH-35, Fanuc OT,15"chuck,24"swing,120"cc,flat bed,H4 & V6 turrets

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Okuma #LNC-8 Cadet, OSP5020G,8"chuck,tailstock,turret,tlg,chip conv.,1995

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn

Okuma #LR102ST, 4-axis, 10 HP, 6000 RPM, OSP 5020 controls

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LR-15W, CNC lathe,OSP 5020L,(2)turrets,subspdl,LNS Sprint,1993,#146912

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Okuma #LR-25, 4-axis, OSP5020L, 12"3-jaw, tailstock, color control, excel, 1989

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Okuma #LR-25, 4-Axis, OSP5020L, 15"chuck, chip conveyor, 1987

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #LT15M, twin spdl,twin turret,live tool capability,C-Axis,OSP 5020L,LNS BF,'95

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Okuma #LT25, twin spindle twin turret turning center,3500 RPM,OSP 7000L CNC,'99

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Okuma #LT-25, twin spindle,twin turret,OSP 7000L CNC,2.75"bar,3500 RPM,1999,#8280

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Okuma #LT-25, 5-Axis,twin trrt & spdl,OSP-U100,60"cc,20"swing,3500 RPM,2000,#3029

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #LU-15 2ST/600BB, OSP7000,2.75"bar,8"chk,14.2"dia,9.8"lgth,APC,BF int,'96

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Okuma #LU-15BB-2ST/350, OSP 7000, 4-axis, 10"chuck, chip conveyor, 1999

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma #LU25/650, OSP700L,12"chks,3.1"bore,26"sw,26",3500 RPM,12/10 trrts,chip,1997

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Okuma #LU35-2SC1500, 4-Axis,29.13"swing,15"chuck,Okuma P200 control,109 cutting hrs,2010

Superior Machinery, Burt, MI 989-770-4827 (Fax 989-770-4873) Keith McKay

Okuma Macturn #30W, Okuma OSP U100L, 21"swing, 3"bore, 60"centers , 2003, #30540

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Okuma Macturn #350W-25-1500, 8-Axis, 120 ATC, 10"3-Jaw on subspdl, barfeed

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Okuma Multus #B300C, Y-Axis Milling Lathe or comparible

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Okuma Twin Star #LT200BB-MY, multi axis turning center, 8"chuck, 2008

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Okuma-Howa #ACT 2SP-V3, twin spindle vertical turning center,12"chucks,1994

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Okuma-Howa #HL35, 18iT,12"chk,3.6"bore,20"sw,24"BC,3500RPM,12 trrt,APC,barfeed,'00

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Olympia / Behringer #V800, lathe,Fanuc 18T,32"sw,135"cc,1975,rblt/retro 2000,#58019

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

Olympic Seiki #VL8, Fanuc 0i,8"chk,20 HP,4500 RPM,8 tools,work changer,chiller,'04

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Omni-Turn, 12" x 12" & 12" x 9"travels, 4000 RPM, 2 & 5 HP

Richlin Machinery Inc, Farmingdale, NY 631-694-9400 (Fax 631-694-9415) Irv Richlin

Poreba #PNA-110, 41"x 236",4-pos.turret,S/R,chip conv,Fanuc 0iTC,new,#16964

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Poreba #PNA-1650, 63"x 472",6"hole,4-pos.turret,S/R,Fanuc 0iTC,2009,#16981

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Pratt & Whitney Star Turn #8-15, N/C lathe slant

Sadler Machinery Sales, Rochester Hills, MI 248-770-9871 (Fax 248-373-1766) Robert Sadler

Pratt & Whitney Star-Turn #1800, universal CNC lathe, 18"3-jaw chuck, chip conveyor, Q51 PC based CNC rebuilt & retrofit

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-538-0367 (Fax 616-878-3736) Jessica Kolenda

Racer #RCM 6M, flat bed,33"x236",30 HP,Fanuc 18iTB,4-pos electronic tl.changer,'08

Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler

Racer #RMC 2162, 21" x 62", Fagor 8055 control, 2002

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Romi #GL240, Fanuc 0iTC,16.5"sw.x15.7"X,6"chk,6k RPM,2.3"bore,never used,'08,#3018

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Romi #M43x140, Fanuc 21T,43"x140",15"Hole,8-Sta.trt,Chip Conv,Stdy,60 HP,2007 #21322

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Ryazan #RT755F3, HD flat bed CNC,Fanuc 0-T w/Heidenhain Scl,8 sta.auto trrt,1993

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

Ryazan, 46"x 306",5"bore,Fanuc OT,30 HP,8 sta.turret,2 steady,chip conv,1996

Ted Grob Sales Inc, Grafton, WI 262-377-8220 (Fax 262-377-0778) Ted Grob

SNK #SUT-10, CNC lathe,23.6"swing,33.2"centers,2"hole,4000 RPM,Fanuc 21T,1995

Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Fax 303-795-7599) Frank Dieveney

SWI #Trak TRL 1630SX, manual & CNC lathe,tailstock,4 pos.tool post,30"centers,2006

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Southwestern Industries Prototrak Trak #TRL1840V, very clean, 2004

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 () Bill Garbe

St. Etienne #H1152N, 2-X,45"sw,160"cc,Flex-Mate,39"4-J FP chk,30"4-J,25"3-J,1987,#23248

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Star Micro-Tronics (Kennametal) #MAF42, Fanuc 16T,5-Axis,tooling,chip conveyor

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn

Star #SST-16, 0.62"bore, 10k RPM, 12'FMB barfeed, live tooling, 1993

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Supermax #TC-2, CNC lathe,Fanuc OT,18.9"swing,2.44"spindle bore,8 sta.turret,5C collet,1996

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Takisawa #TAC-560, 22"swing,40"cc,12"chk,CNC/manual,in/mm,Fanuc 20T,1997,#21369

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Takisawa #TC10, self load CNC chucker,Fanuc 21T,12.5"x7.8",6"chk chip conv,1998

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Takisawa #TC4, 2-Axis,Fanuc 15T,7.2"spdl bore,21"turn dia,20"swing,9.8"X,42.5"Z,'88

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Takisawa #TS-20, CNC lathe,Fanuc 10,20"swing,chip conveyor,tailstock,1989

Sabito Machinery Inc, Concord, ON 905-738-8730 (Fax 905-738-5148) David Slimowitz

Takisawa #TT200CM, 2-spdl,2-trrt,2-Fanuc 21iTB,milling,robot,stacker,2003,#20293

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Takisawa #TX3-l5, 18"chuck,21"swing,16"turn.dia,35"cc,Fanuc 6T,30 HP,#7667

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Tongil Panther #ST-20, lathe,Fanuc 0T,8"chuck,8 sta.turret,tailstock,exc.,1999

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Tongtai Galaxy Nova #200, Fanuc 0T, 8"chuck, 1-3/4", 1994

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Toolmex Haco #TUR800SC, new manual-servo,32"x118",H.D,5.5"bore,30hp,Tri-V,new

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

Toolmex #TUR560MN, Siemens 840,20"x78"BC,Tri-V,20hp,European,new,sale price

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

Toolmex Haco #TUR630AMN,Siemens or Fanuc,25x118,5.5"bore,20hp,Tri-V,European,new

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

Toolmex #TUR630MN, Fanuc 0iT,25"x78",4.1"nore,8 sta.turret,Tri-V,new

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

Toolmex Haco #TUR930MN, Fanuc,12.5"bore,Oil Country,37x118"BC,Tri-V,new

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

Toolmex Haco #TUR930MN/CNC,Fanuc,5.5"bore,37x236"BC,8 sta.disc,Tri-V ways,new

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

Tornos / Grutzpe, Fanuc 16,25"chuck,32"swing,4"spindle bore,79"cc,steady

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Tornos Micro #8, Fanuc 32iA,5-Num.Axis,3.94"bar,sliding hdstk,15k RPM,'08,#30776

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Tornos Precision CNC lathe, Fanuc Series 32i-A w/5 numerical axes,15k RPM,2007

Global Machine Brokers LLC, Watertown, CT 860-484-4449 (Fax 860-484-4452) Joseph Wihbey

Traub #TND-400, 2-Axis w/C-Axis,drilling,Traub Tx8F,18.9"x31.5"cc,4k RPM,12 trrt,'95

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Tsugami #TMB-2, 9-Axis Mill/Turn Center, 2"bar,60 ATC,16 pos.turret,350 hours,2010

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Vanguard #CAK6150DI-890,19.6"sw,1800rpm,2.76"hole,Fanuc Olmate,chk,spl/chip grds.

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #CAK6163, 24.8"sw,12.59"x,53.14"y,17-1000rpm,15hp,12"3-jaw chk.(790229)

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #HTC80150, 40"swing,21.06"X,59.05"Z,50-1800 RPM,50/60 HP,21"3-jaw chk

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vantage #KAN, CNC Lathe,Fanuc 18I-TB,30"Spdl.bore,4-Axis,4-Jaw chk,steady rest,2009

Pinales Machinery Sales, Houston, TX 281-974-1783 (Fax 281-974-1783) Juan Pinales

Vantage #KAN55-V30-6M, CNC lathe,(2) 31-1/2"steady rests,4 chks,chip conveyor,1-1/4"tool shank,47-1/2"bed width,2009,#2752

Hoppen-Webster Machinery Inc, East Peoria, IL 309-698-5564 (Fax 309-698-5562) Ken Webster

VDF, 50"x 282",100"in gap,450 RPM,8-station turret,boring att,AB CNC,1980,#16526

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

Victor #1860DCL, 18"x60",2500 RPM,2.05"hole,Fanuc 20TA w/Teach function,'99,#9179

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Victor #TNS-2, CNC lathe, Fanuc 10TF, LNS Hydrobar feed, tailstock, 25-2500 RPM, 15/20 HP, parts catcher, 1986, #146366

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Victor #TNS-5, Fanuc OT, 27.6"sw, 42"cc, 12"chk, tlstk, chip conv, 1989, #147768

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Voest Alpine W100x5000 Millturn, 36"x196",30atc,live tooling,Siemens 840,1997,S29816

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Voest Alpine #WFL65, 32"x120",5-Axis,Siemens CNC,live milling,90 ATC,2000,#21493

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Voest Alpine #WNC700S X1250, 29.5"sw,49.2"lgth,Siemens 880,C&Y-Axes,2 trrts,'89 (2)

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Waldrich - Siegen, 68" x 480", 60"c/s, 40 ton, Siemens 810D

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Walrich Seigen CNC lathe, 68"x 432", Siemens 840 CNC, steady rests

Opincar Machinery, Smyrna, TN 615-459-7983 (Fax 615-223-9820) Tom Opincar

Warner & Swasey #1SC-12, M-5020, 20 HP, AB7360 CNC, chip conveyor

Southwest Dynamics Inc, Arlington, TX 817-649-5050 (Fax 817-640-1090) Rick Bomer

Warner & Swasey #2SC-15, M-5060, 50 HP, AB7360 CNC, chip conveyor

Southwest Dynamics Inc, Arlington, TX 817-649-5050 (Fax 817-640-1090) Rick Bomer

Warner & Swasey #3SC/24, M-5240, 60 HP, AB7360 control, CNC, chip conveyor

Southwest Dynamics Inc, Arlington, TX 817-649-5050 (Fax 817-640-1090) Rick Bomer

Warner & Swasey #3SC-24, 75 HP, Fanuc 18i, chip conveyor

Southwest Dynamics Inc, Arlington, TX 817-649-5050 (Fax 817-640-1090) Rick Bomer

Warner & Swasey #SC10M-4850, 40 HP, GE1050 CNC, shaft machine

Southwest Dynamics Inc, Arlington, TX 817-649-5050 (Fax 817-640-1090) Rick Bomer

Warner & Swasey #SC15, 15"3-jaw,chip conv,clnt,CNC upgrade,under power,excellent,1975,#163

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Warner & Swasey #SC25, 24"3-jaw,8-3/8"hole,54"cc,2 turrets,60 HP,AB7340 CNC

Southwest Dynamics Inc, Arlington, TX 817-649-5050 (Fax 817-640-1090) Rick Bomer

Warner & Swasey #SC25, 24"chk,8-3/8"thru hole,29"sw,24-3/4"ov/carr.,NUM1060 CNC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

W & S #SC25-120 lathe, Fanuc 18iT,24"chk,6"spdl,25"OCS,33"swing o/bed,120"BC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Warner & Swasey #SC28, 28"/34"swing, Fanuc OT, low price, 1994, #10204

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Warner & Swasey #SC32, 32"chk,13"thru hole,36-1/2"sw,32-1/2"over carriage

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Warner & Swasey #SC32, 36"swing,80"Z,36"chuck,12.2"HIS,Fanuc 15tt,rblt 2000 (3)

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Warner & Swasey #WSC-8II, 2"bar,8"chuck,11"turning length,10 stations,4k RPM,1989

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Wasino #A18, CNC lathe, Fanuc 18i, robot loader, 2000 (4) available

Madison Machinery Co Inc, Hampton Bays, NY 631-728-6103 (Fax 631-574-1280) Joe Madison

Wasino #G-07M, Fanuc 21-TB,3-Axis gang tool lathe,(2) live spdl,low hrs,2004,#30513

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Wasino #L5-J, CNC lathe, 12"chuck, 1981

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

Wasino #LJ-5, 1.7"bar, 21.7"cc, 4k RPM, 12 tools, Fanuc 21-T, 1999

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Wasino #LJ-63M, live tool slant bed,10"chk,3"bore,12 trrt,3500 RPM,Fanuc 10T,1987

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Wasino #SM-10, Fanuc 0T, 5-C, A2-4, 6000 RPM, 8-position turret, live tool, 1995

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Wasino #SM-10, Fanuc 0T, 5-C, A2-4, 6000 RPM, 8-position turret, live tool, 1995

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Wasino #SM-10, Fanuc 0T, 5-C, A2-4, 6000 RPM, 8-position turret, live tool, 1995

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Wasino #TH102, twin facing spdl., CNC lathe, Fanuc OT, gantry loader, 1991

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

Weiler Model = 10"

Netmachinery Inc., Mooresville, NC 704-660-8130 (Fax 704-663-3475) David Kragh

WFL #M65X3000, 5-Axis slant bed lathe,Sinumerik 840C,32.30"swing,19.8"SMW chk,2000

Machinery Works Inc, Saukville, WI 262-284-5611 (Fax 262-284-5613) Adam Wescott

Yama Seiki / Cleveland #G12, CNC lathe, Fanuc O-T, 8"3-Jaw chuck, programmable tailstock

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-538-0367 (Fax 616-878-3736) Jessica Kolenda

Yang #SML12, CNC Turning Center, 5.3" x 5.9", 1994

Holland Machinery Company Inc, Miami, FL 305-635-2325 (Fax 305-638-3524) Sales

Yang #SML12, CNC turning center, Lipe type bar feed collet nose/chuck, 1997

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman

Yang #SML-20, CNC lathe,Mitsubishi CNC,8"chuck,2"hole,18.9"swing,1999,#76335

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Yang #SML-20, CNC lathe, full turret of tooling, chip conv., 18.9"swing, 20"cc, Mitsubishi Ctrl, 1999, #147693

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

BOEHRINGER VDF, 96' DUS-560 2M, Siemens 805 CNC Control, 12" 3-jaw & 22" 4-jaw Chuck, Quick Change Toolpost

Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard

BOEHRINGER VDF, DN-820 x 2 meter CNC Lathe, 3-jaw & 4-jaw chuck, Fanuc 6T control

Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard

Back to category listings.

= photo available Spec Sheet

= spec sheet available rfq

= request quote from seller camera

= video available web site

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search