CNC MACHINERY & EQUIPMENT:
MACHINING CENTERS, HORIZONTAL, CNC Mills

MACHINING CENTERS, HORIZONTAL, CNC Mills CNC MACHINERY & EQUIPMENT - Surplus Record

For over 35 years a Leader in the Machine Tool Ind.

There are 219 listings in this category
File update: Sun, Feb 5, 2012 01:28

Advanced Search

Sort by:

Original Sort

Amera-Seiki #AH-1250, 49.2"pllt,82.7x48.6x48.6,6k rpm,Baxis,120atc,Fanuc 0iMD,2011

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #AH-630,24.8"pllt,39.4"x33.5"x37.4",6k RPM,Baxis,60atc,Fanuc 0i-MD,'11

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Amera-Seiki #AH-800,31.5"pllt,51.2"x48.6"x48.6",6k RPM,Baxis,60atc,Fanuc 0i-MD,'11

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

Bridgeport #XR700 APC, Fanuc 18i MB,chip conv.,12000 RPM,#40 taper,25 HP,2007

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Cincinnati Cintimatic, CNC horizontal milling machine, Delta Dynapth control

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-538-0367 (Fax 616-878-3736) Jessica Kolenda

Cincinnati Maxim #500, 30"X,30"Y,30"Z,20"pllts,120 ATC,Acramatic 950,TSC,'92,#20930

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Cincinnati Maxim #630(2), 9-pallets w/changer, Accramatic 950, 1997

Luke's Machinery Ltd, Winnipeg, MB 204-943-3421 (Fax 204-956-0143) Bob Webb

Cincinnati Maxim #630, 25"x25",12 pllt shuttle,Cat 50,clnt thru,full 4th,10k RPM,'99

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Cincinnati #T35, 5-axis,60"X,72"Y,40"pllt,45 ATC,tilt hd,21k RPM,Acra 950,'91,#17648

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Cincinnati #T35, 5-Axis, 60"X,72"Y,62"Z, (2) 39.3"x 39.3" 4th-X pallets, 45 atc, #25624

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Cincinnati Milacron #XL75, 480"X,96"Y,48"Z,36"W,10"U-Axis hd,135atc,Fanuc 15m,'91(2)

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Daewoo Ace #H50, 28"X, Fanuc O, 40 ATC, one degree, #50 taper, 1989

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Daewoo Ace #H50, 31.5"X,25.6"Y,25.6"Z, 30 HP, Fanuc 16M, #213940

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

Daewoo #DHM50 0,31.5"X,25.6"Y,25.6"Z, 60 ATC,rigid tap,6k RPM,19.7"pal,1998-2002 (2)

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Daewoo #DMH-400, 24"X,22"Y,22"Z,16"pallets,12k RPM,60 ATC,TSC,Fanuc 16M,2000,#21388

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Daewoo #DMH-400, Fanuc 16Mi,(2)16"pllts,23"x22"x22",1°,12k RPM,CTS,'00,#30832

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Daewoo Puma #DMH-500, Fanuc 16i,32"x26"x26",60atc,#50 tpr,8k RPM,'02 (2) #2951

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo #H50S, 20x20,40 ATC,50 BT,coolant thru,Fanuc OM,coolant sys,1°index,clean,'96

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Deckel Maho #DMC160U, 5-Axis FMS,63x49x40",APC,240atc,Millplus 3D CNC,'03,#20866

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Deckel Maho #DMG160 U Duoblock, Fastems Sys., 2003

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

Deckel Maho #MC-800H, 5-Axis,31"X,25"Y,25"Z,10k RPM,DMG532,1994

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Dixi #350-TPA, CNC horizontal machining center, 4-pallet station, 1999

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

DMG DMU #125P, Heidenhain Mill Plus IT 5-Axis,3D contour.ctrl,49x34x31,'04,#30851

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Doosan #HP4000, 23.6x22x23.6",14k RPM,262atc,pllts,30hp,Fanuc 18iMB,#40,mint,'09

Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman

Doosan #HP4000, CNC HMC,262 ATC,coolant thru spindle,15.75"pallets,Fanuc ctrl,2007

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Enshu #JE-40, Fanuc 18M,full 4th Axis,15.7"X,19.7"Y,15.7"Z,new spindle,2002

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Enshu #JE40N, 15.7x19.7x15.7",15.7"x15.7"tbl,10k RPM,#40,16 ATC,Enshu ctrl,1°,'96

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn

Enshu #JE60, Yasnac i80,15.7"pllts,23.6"X,Y,Z,#40 tpr,13k RPM,60 ATC,conv,'99,#B1273

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Enshu #JE60, Yasnac i80MB,23"x23"x23",1°,13k RPM,Renishaw probe,1999,#29901

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Eumach #EBM-2600, CNC horizontal machining center,102"x55",32 ATC,Selca CNC,2007

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Ex-Cell-O #508, Fanuc 18M control, Cat 50, 40"x 40", 75"X, 60"Y, 36"Z

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

Excello #508 W.C., 72"x61"Y,36"Z,A-B 7320 CNC,(2)48"x48"pallets,36 ATC,good,'80

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

G & L #15HS, 36"Y,120"X,24"Z,40 ATC,built-in rotary,4-axis,32"x 132"table,#2729JV

Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea

G & L #15HS, 76"/120"/200"X,36"/42"Y,23"Z,4-axis,24"x 84" R.T.,G&L 800L/8000L

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

G & L #450 Series MC50, 5"spindle,66"X,68"Y,36"Z,40 HP,14-3000 RPM,G&L Numerip

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn

Giddings & Lewis #987-10BS, 36"Y, 120"X, 14"Z

Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Fax 724-458-0753) Thomas Noone

G & L Bickford #15HS Numericenter, 48 ATC,new Fanuc ctrl,252"(21')X,60"Y,30"Z,'88

Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters

G & L #HMC-230, (2) 24.9"x 31.5"pllts,47"X,39"Y,47"Z,100-ATC,10k RPM,Fanuc 16-I Mb,2003

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

G & L #HMC-95, (2)16"x20"pllts,10k RPM,50 ATC,full 4th Axis,Siemens 840d,2001

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

G & L Orion #2300, 4-axis,47"X,47"Y,35"Z,100 ATC,32"pllt,4-APC,G&L8000,1995,#20395

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

G & L #PC60X, 6",30 HP,5-1150 RPM,40 ATC,Cat 50,2 pallets,remf.w/1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

G & L #PC60X, 6",30 HP,5-1150 RPM,40 ATC,Cat 50,2 pallets,remf.w/1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

G & L Ram #500, 35.4"X,31.5"Y,29.5"Z,12k RPM,120 ATC,Cat 50,19.7"pllt,4th axis,'97

Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch

Giddings & Lewis Ram #630, 5-Axis,dual pal. shuttle,40 atc, 10-12000 rpm,'98,#26128

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

G & L, 5-Axis trunnion,2 pallet,14k RPM,140 ATC,Cat 50,ctrl upgrades,new parts,1996

Winslow's Machine Tool Sales, Lexington, TN 731-614-1296 (Fax 731-968-8976) Don Winslow

Goss & DeLeeuw, twin turret, 2- 6 pos.opposing turrets,2-pos.load sys,to machine air comp.cyls,#BR8925,$19,500.00

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Haas #ES-5-4T, 5-Axis,Coldfire proc,HRT-210SP rotary w/tlstk,5th brushless,HS Mach,CT-40,rigid tap,2008

Machinesused.com, Minneapolis, MN 763-745-1166 (Fax 763-476-4092) John Lawton

Haas #HS15AXT, Horizontal Machining Center, 5-axis, 10k spindle, 2001

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HS1RP, 16"x 16"pallets,7500 RPM,thru spdl clnt,24 ATC,#40 tpr,1996,#8324

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #HS1RP, 24"X, 20"Y, 20"Z, 16"x 16"pallet, 24 ATC, rigid tapping, 1999

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Haas #HS1RP, 24"X,20"Y,22"Z, 16"pallets, 24 ATC, 10000 RPM, Haas CNC, 1999, #17470

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #HS1RP, 16"pllts,24"X,20"Y,22"Z,7500 RPM,20 HP,#40 tpr,full 4th,24 ATC,1998

Star Equipment Co., Inc., Union Lake, MI 248-366-6400 (Fax 248-366-6500) Chris Starnes

Haas #HS1RP, #40 tpr,(2) 15.75"pllt,24 ATC,chip blaster,clnt thru,RT,chip conv,1997

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Fax 248-926-8499) Randy/ Jeff/Chris

Haas #HS1RP, 4-axis,24"X,20"Y,22"Z,60 ATC,16"pllt,TSC,options,Haas CNC,'03,#21320

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #HS1RP, 10k spindle,thru spindle coolant,loaded with options,2000

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Heller #MC-500, 4-axis,63"X,55"Y,49"Z,82 ATC,HSK 100,TSC,Siemens 840D,2001,#20396

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Heller #MC-500, 4-axis,63"X,55"Y,49"Z,82 ATC,HSK 100,TSC,Siemens 840D,2001,#20397

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hitachi-Seiki #HC-400, Fanuc 15M,15.7"pallet,20"X,18"Y,18"Z,4th Axis,10 HP,6k RPM,1990

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve

Hitachi-Seiki #HS500, Seicos/Fanuc 16M,19.7"pllts,23"x23"x24",12k RPM,thru/flood clnt

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Hitachi-Seiki #HS630, Fanuc 16M,#40 taper,25"pallet,12k RPM,25 HP,32"x31"x31"

Elite Machine Tool, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Hitachi-Seiki #HS-630, 12k RPM,33.5"X,31.5"Y,33.5"Z,Cat 40,24.5"pallets,#1561

Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Fax 631-586-3612) Joe Shapiro

Ingersoll #HVM600A, 4-Axis,24.8"x24.8"pallet,40.55"X,40.55"Y,23.62"Z,1998,#23955

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Kia #KH40B, horiz.mill, 22"X, 19.7"Y, 50 ATC, Fanuc 15M-A, Ser.KH40015, 1994

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Matt Crull

Kia #KH-40G, 16"pallets,12000 RPM,Fanuc 18i-MB,probe,under 900 hours,2006,#28893

Machnet, Los Angeles, CA 310-909-2020 (Fax 310-909-2030) Gene Taubman

Kitamura Mycenter #H400, Fanuc 15M,15.7"pllts,24x20x20",full 4th,100atc,BT40,'96

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Kitamura #H400, 15.7"x 15.7"pallets,.001°,Fanuc 15M,100 ATC,TSC,1998,#21198

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Kitamura Mycenter #HX250I, 12"X,12"Y,13"Z,full 4th Axis,Yasnac i80,2004,#75736

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Kitamura #HX500I, 4th Axis,pallet changer,coolant thru spindle,chip conv.,2001

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Kuraki #MH-630, CNC HMC,Fanuc 11,33.86"X,27.95"Y,Cat 50,32 ATC,30-4000 RPM,fully enclosed,#M01305

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

Leblond Makino #1210, (2) 39.5"x 39.5"pallets,4k RPM,Cat 50,Fanuc 6MB,360°,1984

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn

LeBlond Makino #A55, 22"X,22"Y,22"Z, dual 15.75"pallets, low hours, 1992

AMTAC Corp, Erie, PA 814-838-4629 (Fax 814-838-4557) Russ Taccone,Jr.

Leblond Makino #MC65-A99, 25"X,20"Y,20"Z, Fanuc 11M, 99 ATC, 1986, #15765

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

LeBlond Makino #MC98, CNC horizontal machining center, dual 25"pallets, 1994

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Machining Systems #HMC-200, 39"x 39"pallet,78"cross,58"vert,#50 tpr,30 HP,Fanuc ctrl

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 () Bill Garbe

Machining Systems #HMC40, 40"X,30"Y,24"Z,48 ATC,Delta 10 ctrl,2400 RPM,1990

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

Makino #A55, CNC HMC,dual pallets,travel=22",Fanuc 16-MC Makino Pro 3

U S Equipment Co, Detroit, MI 313-526-8300 (Fax 313-526-5303) Sales

Makino #A55, 22"X,22"Y,22"Z,(2)15.75"x 15.75"pllts,Fanuc 0MC,1993 (2) Available

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Makino #A66, flexible HMC, Fanuc 16M,40 ATC,X-800mm,Y-700mm,Z-640mm,4th axis,(12)

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Makino #A66, 31.49"x27.55"x25.19",19.7"pllt,hi-pressure clnt,thru spdl,Pro 3,'97

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Makino #A71, horiz. mill, Fanuc Pro 3, 20" pal.,hyd. clamp.,40 ATC, X-28.7,Y-28.7,z-31.5,2003

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Makino #A81, 35.4"X,31.5"Y,40.2"Z, fully contouring, Pro 5 control, 2007

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Makino #A88E, 35"X,32"Y,38"Z,25"pllts,12k RPM,130 ATC,TSC,Pro 3 CNC,2000,#20621

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Makino #A99, (2)32"pllts,39"x39"x37",full 4th Axis,40-ATC,Cts,12k RPM,Fanuc 16i,'01

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Makino #A99E, 49"X,43"Y,49"Z,Pro 3 CNC,90-ATC,18k RPM,HSK-A100,2004,S29921

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Makino #J66, CNC HMC,Fanuc Pro 3 control,19.68"X,22"Y,19.68"Z,15 ATC,15"x 15"table,50-16000 RPM,2001,#MV4910,$57500.00

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Matsuura #900H, Fanuc 15M,36"x 28"x 39",4th Axis,6k RPM,100 ATC,#50 taper,#30691

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Matsuura #ES450H, 17.7"x15.7"x15.7",12"pllt,30 ATC,15k RPM,Fanuc 18iM,1999,#17430

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Matsuura #ES450HII, 17.7"x15.7"x15.7",30 ATC,12"pllt,15k RPM,Fanuc 18iM,2000,#17431

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Matsuura #MAM500PC11, HMC,19.69"X,18.50"Y,17.72"Z,4th Axis,Yasnac i80,1997,#76548

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Matsuura #MAM600HF, hor.mill,23.2"X,21.6"Y,21.6"Z,130 ATC,Yasnac i80,4th Axis,1992

H & H Machinery, San Ramon, CA 925-577-5356 (Fax 925-401-9526) Tim Hollis

Matsuura #MAM600HF, Yasnac i80,15.75"pllt,23.6x23.6x24.6,8k RPM,136atc,chip conv,'93

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Matsuura #MAM600HF-PC2, 15.75"sq.pllts,23.6x18.6x21.6,8k RPM,240atc,1°,Yasnac i80

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Matsuura #MAM-700 HG, X-29.5",19.7"pallets,001°,15000 RPM,Fanuc 16,60 ATC,#21375

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Matsuura #MC900H, 4-Axis,Fanuc 15M,36"x28"x29",20HP,#50 tpr,100 ATC,6k RPM,1994

Elite Machine Tool, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Matsuura #MC900H, Fanuc 11M, 6 pallet, 1987

Elite Machine Tool, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mazak #FH4000, 400mm,22x20x25,12k RPM,30 HP,40 ATC,#40 taper,Fusion 640M,2000

ReSell CNC, Maitland, FL 407-478-8181 (Fax 407-478-1149) John/ Curt

Mazak #FH4000, HMC,(2)15.5"sq.pllts,22"X,20"Y,24"Z,12k RPM,Cat 40,40 ATC,1°,sync tap,CTS,atl,work probe,Mazatrol 640M,2001

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #FH4000, HMC, Fusion 640M, (2) 15.74"pallets, 40 ATC, 12k RPM, 2001

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak #FH480, M-Plus, 22"x 22"x 20", 12000 RPM, 30 ATC, chip conv., EIA/ISO, 1995

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Mazak #FH480, HMC, Maz.M-Plus, 22"X,22"Y,22"Z, 30 ATC, 2 pallets, 1997

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak #FH4800, Fusion 640M, 1 degree, 12k RPM, 40 ATC, 2001

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mazak #FH4800, 15.7"x15.7"pllt,Fusion 640M,22"x24"x22",Cat 40,40atc,'97,#M04660

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #FH580/40, 19.7"x19.7"pllts,Maz.M-Plus,12k RPM,clnt thru,60 ATC,chip conv,'97

Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard

Mazak #H15B, 36"X,33"Y,33"Z,Mazatrol M2,40 ATC,full 4th,2 pallets,4100 RPM

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

Mazak #H15J, 3-axis,25.6"X,20.6"Y,19.6"Z,40 ATC,Maz.M-2,19.69"pllt,Cat 50,chip,'85

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak #H400, M-32 ctrl,2 pallets,7000 RPM,30 ATC,1°,22"X,18"Y,20"Z travels

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mazak #H400, CNC horizontal machining center, 60 tool, M32 control, 400 MM

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

Mazak Mazatech #H400N, 22.05"x,20.08"y&z,Cat.40,30 ATC,Mazatrol M-32A Ctrl,'91

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Mazak #H400N, Maz.M-32 CNC,(2)16"pllts,120 ATC,10k RPM spdl.,collant thru,1°,1990

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Mazak #H500/50, 19.7"pllts,1°,#50 tpr,40 ATC,28"X,25.6"Y&Z,20HP,TSC,'91,#CK-18923

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Mazak #HQC30, 15"X,14"Y,14"Z, Mazatrol control, 30 ATC, 1985, #M01309

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

Mazak #MAZATECH H-500/50, 27.95"X, 25.59"Y, 25.59"Z, 40 ATC, M-32A, 2 pal., 1991

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Matt Crull

Mazak Nexus #HCN5000-II, 28.74"X 28.74"Y 29.13"Z, 12 pallets, 18000 RPM, 2007

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Mazak #PFH4800 Palletech Sys, 2 machine,12 pllt FMS,22"x24.8"x23.62",clnt thru,CC,'06

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Mazak, horizonatal machining center

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mitsubishi #H500/50, 28"X,24.6"Y,23.6"Z,(2) 19.7"x19.7"pallet,60-6k RPM,60 ATC,1998,#25095

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

Mitsubishi #M-4HB, 15.75"pllt,25.6x22x25.6,12k RPM,1°,6-APC,CTS,60ATC,Cat 40,'00

Precision Machinery Sales Inc, Elk River, MN 763-370-7460 () Matt Klein

Mitsubishi #M-H4B, 4th Axis,Meldas MD5-A,25.6"X,22"Y,25.6"Z,40 ATC,clnt.thr.spdl.,'98

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Mitsubishi #MH-500, Meldas 300M CNC,20"pllts,1°,60 ATC,#50 tpr,6k RPM,clean,'92

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Mitsubishi #M-H50D, 29"x25"x25",20"pllts,100 ATC,Cat 50,TSC,Fanuc 16M,'96,#20122

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mitsubishi #M-H50E, 500M,20"pllt,32",26",26",1°,6000 RPM,80 ATC,CTS,1998

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mitsubishi #MH5A, Meldas M3,28"X,24"Y,23"Z,(2)19.7"pllt,#50,60ATC,15HP,IP/UP,1996

AMTAC Corp, Erie, PA 814-838-4629 (Fax 814-838-4557) Russ Taccone,Jr.

Mitsubishi #MH60C, 40"X,31.5"Y,31.5"Z,25"pllts,60 ATC,Meldas 330cnc,4-Ax,'92,#19628

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mitsubishi #MH60D, Mits. 323M Ctrl, 39.4"X,31.5"Y,31.5"Z,Cat.50,120 ATC,'95,#147607

Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Mark Piedmonte

Mitsubishi #MH60D, 39.4"X,31.5"Y,31.5"Z,Cat 50,Meldas 330M 4x,120 ATC,scales,1995

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mitsubishi #MH60E, Meldas 520,39"X,31"Y,31"Z,(2)24.8"sq.pallet,Cat 50,80 ATC,'97

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mitsubishi #M-H80D, Meldas 500,49"X,39"Y,33-1/2"Z,60 ATC,#50 taper,1996,#4685

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mitsubishi #MH80E, 49.2"X, 39.4"Y, 33.5"Z, 6000 RPM, 37.5 HP, 1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Mitsui-Seiki #H5D, Fanuc 15MB,(2)24.8"pallets,34"x27"x29",120 ATC,Cat 50,1997

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Mitsui-Seiki #HJ100A, 62"X,40"Y,48"Z,Cat 50,8k RPM,dual 120ATC,Fanuc 15M,B-axis,'99

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mitsui Seiki #HR8A, (4) 51"pallets,X-70.8",Y-59.0,Z-47.2",W-11.8",92 ATC,BT50 tpr,Renishaw probe,50/40 HP,3150 RPM,1989,#2870

Hoppen-Webster Machinery Inc, East Peoria, IL 309-698-5564 (Fax 309-698-5562) Ken Webster

Mitsui-Seiki #HT3A, 22"x20"x22",400mm pllts,Fanuc 15M,4th,machined only plastic

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

Mitsui-Seiki #HT4A, (2)19.68"pllts,28.34"X,23.62"Y,21.65"Z,60 ATC,8k RPM,1999 (2) Avail

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mitsui-Seiki #HU50A, (2) 20"pllts,1°,28x27x26",#50,Fanuc 16M,thru spdl clnt,#3992

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Mitsui-Seiki #HU63A, F15M,24"pllt,35.4"X,31.4"Y/Z,10k RPM,60atc,#50,CTS,'97,#2869

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mitsui-Seiki #HU63A, (2) 24.8"sq.pallets, 35.4"X,31"Y,31.5"Z, 6k RPM, 30 HP, Cat 50, 60 ATC, Fanuc, 1998

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mitsui-Seiki #HU63A, Fanuc 15M, 35"X,31"Y,31"Z, (2) 24.8"pallet, 60 ATC, 1998

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Mitsui-Seiki #HU63A, Fanuc 16M,24.8"pallets,40"X,31.5"Y&Z,10k RPM,Cat 50,90 ATC,'98

International Machine, Clarkston, MI 248-845-2140 (Fax 248-845-2139) Tim Mack

Mitsui-Seiki #HU63A, 35"X, 31.5"Y,24.8"pallets,.001 deg.,Fanuc 30i-A,2007,#19549

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mitsui-Seiki #JIDIC-H6C, 5-axis,52"x40"x42",Cat 50,120 ATC,Fanuc 15M,gear box,'93

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mori-Seiki #MH40, Fanuc 11M, 32 ATC, pallet load sys., 21.7"X,17.7"Y,19.7"Z, (2)

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Mori-Seiki #MH40, horizontal machining center

Elite Machine Tool, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #MH-40, Fanuc 6M, 1985

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Fax 414-769-1522) Joe Ryan

Mori-Seiki #MH-40, Fanuc 11M, 1986

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Fax 414-769-1522) Joe Ryan

Mori-Seiki #MH50, Fanuc 15M,(2) 19.7"pallets,60 ATC,20 HP,6k RPM,chip conveyor,1993

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Fax 248-926-8499) Randy/ Jeff/Chris

Mori-Seiki #MH50, Fanuc 11M, 4th Axis rotary, Aerospace machine

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Mori-Seiki #MH50, horizontal machining center, Fanuc 11M, pallet changer

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Mori-Seiki #NH5000/40, MSG501,20"pllts,25",24",26",1°,14k RPM,30 ATC,cool jet,2003

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #NH5000/40, Fanuc MSG501,24.8"x23.6"x26.4",30 ATC,14k RPM,conveyor,2002

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #NH5000/40, 24"X,23"Y,26"Z, 14000 RPM, 30 HP, 40 CT, 30 ATC, 2003

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Mori-Seiki #NH5000/40, 24"X,23"Y,26"Z, 14000 RPM, 30 HP, 40 CT, 30 ATC, 2003

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Mori-Seiki #NH5000/40, 24"X,23"Y,26"Z, 14000 RPM, 30 HP, 40 CT, 30 ATC, 2002

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Mori-Seiki #NH5000/40, MSG501,20"pllts,25",24",26",1°,14k RPM,30 ATC,cool jet,2002

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #NH5000/40, MSG501,20"pllts,25",24",26",1°,14k RPM,30 ATC,cool jet,2002

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #SH500, (2)20"x20"pallets, Cat 40, 60 ATC, 12k RPM, Fanuc 16M, 1998

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mori-Seiki #SH500, CNC HMC,MSC-516 CNC ctrl,24.8"X,23.6"Y,25.6"Z,1999,#76279

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mori-Seiki #SH-500/50, MSC-502 CNC, Cat 50, 1 degree, 60 ATC, CTS, 1000 psi, 2000

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

Mori-Seiki #SH-500/50, CTS, Fanuc 16, 24.8"X,23.6"Y,33.5"Z, 2000

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Niigata #HN50C, 19.6"x19.6"pllt,31.5"x27.6"x22.8",6500 RPM,119 ATC,Fanuc 15MA,'95

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Niigata #HN80B, 4-Axis,49"X,48"Y,36"Z,120 ATC,(6) 32"x32"pllts,Fanuc 15M,'90,#21221

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Niigata #HN80C, Fanuc 15MB,(2) 800mm pallets,60 ATC,X-60.3",Y-48",Z-44.8",4500 RPM,40 HP,reconditioned,1996/2011,#2860

Hoppen-Webster Machinery Inc, East Peoria, IL 309-698-5564 (Fax 309-698-5562) Ken Webster

Niigata #HN80C, Fanuc 15M,60x48x36,12k RPM,Cat 50,4th Axis r/tbl,chip conv,'96,#30589

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Niigata #SPN-50, CNC HMC,Fanuc 16iM,29x29x29",12k RPM,1200 ipm cut,500mm,clnt thru

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Niigata #SPN-50 12 APC cell, 230 ATC Matrix,12k RPM,12 pllts w/load/unload,'97/'98

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

OKK #HM40, Neomatic 530,400mm pllts,22"x22"x22",1°,10k RPM,cool thru,40 ATC,'97

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

OKK #HM40, Mitz CNC, 15"pallets, Cat 40, 50 ATC, CTS, 12000 RPM, 1997

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

OKK #HM40, 15.75"pallets,CT-40,10000 RPM,60 ATC,1000 psi thru coolant,Fanuc 16iM,1996

Superior Machinery, Burt, MI 989-770-4827 (Fax 989-770-4873) Keith McKay

OKK #HM40, 16"pallets, 10000 RPM, Fanuc 16iM, tombstone vises, 1998, #29206

Machnet, Los Angeles, CA 310-909-2020 (Fax 310-909-2030) Gene Taubman

OKK #HM50S, 1 deg.indexing,10k RPM,30 HP,rigid tap,chip conv.,thru spdl.coolant,2001

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

OKK #HM50S, Cat.50 tpr,30HP/100-14K RPM spdl.spd,40AT,24.4"X,22.05"Y/Z,'01

Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Fax 631-586-3612) Joe Shapiro

OKK #HM50S, Fanuc 16, 24"X, 22"Y, 22"Z, 14000 RPM, 1000 psi CTS, Cat.40, 2000

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

OKK #HM600, 4-Axis,31x30x,32",40 ATC,24"pllts,TSC,12k RPM,Fanuc 310iSA,'06,#20808

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

OKK #HM80S, (2) 31.5"pallets,40-ATC,39.4"X,33.5"Y,32.3"Z,Fanuc 16i-M,1999,S26219

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

OKK #HM80S, 39"X,34"Y,32"Z,32"pallets,40 ATC,12k RPM,CTS,Fanuc 16iM,1999,#21044

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

OKK #HP500S, 25"X, 24"Y, 28"Z, Cat.40, Full 4th, CTS, Fanuc 180iSMB, 60 ATC, 2005

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

OKK #HP500S, 19.69"x19.69"pllt,Fanuc 21iMB,24"x24.41"x27.95",60atc,'04,#M04659

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

OKK #MH-40, CNC HMC,(2)15.7"x 15.7"pallets,22.05"X,Y&Z,35-10k RPM,Cat 40,40 ATC

International Machine, Clarkston, MI 248-845-2140 (Fax 248-845-2139) Tim Mack

Okuma #MA-HA-40, horizontal machining center, #40 taper, 40 ATC, 2000, #3108

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Fax 256-831-2207) W Robert O'neal

Okuma #MC500H, 28"X,25"Y,25"Z, 20"pallets, 40 ATC, OSP-5020M CNC, 1994, #17394

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Okuma #MC500H, OSP 5020,20"pallets,5000 RPM,#50,40 ATC,28"X,24"Y,36"Z,1990

Richard Lunt Machinery, Seattle, WA 206-484-8585 (Fax 206-767-9825) Richard Lunt

Okuma #MC600H, (2) 24.8"pallets, 60 ATC, OSP 5020M control, 1993

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Okuma #MX40HA, OSP700 Ctrl, 2-16"pallets,1 Deg.,22"X,24"Y,22"Z,TSC,12k RPM

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Okuma #MX60HB, OSP 7000M,39"x31"x31",24"pallets,full 4th axis,100 tool ATC,1999

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma-Howa Millac #50H, 4-axis,(2)20"pallets,50 taper,coolant thru,Fanuc 16M

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Okuma-Howa Millac #630H, 4-Axis CNC horizontal machining center, 1999

Industrial Surplus Inc, Berlin, CT 860-828-3541 (Fax 860-828-6747) Jack Guzewicz

Saello #MACH-3A, 11.8x11.8"pllt,15.75x13.75x15.75",6000 RPM,20 ATC,Fanuc OM,1995

American Machinery Liquidators, East Brunswick, NJ 732-390-0006 (Fax 732-390-0559) Marc Gallanter

Sajo #HMC-40, 5-Axis, 24"X,18"Y,21.5"Z, 12000 RPM, Fanuc 16i-M, 192 ATC, 2000

Piedmont Machy of Charlotte, Charlotte, NC 704-334-4609 (Fax 704-375-3874) David Hodgkins

Sajo #HMC-40, 5-Axis, Fanuc 16i, 12k RPM, thru spindle coolant, tooling, 2003

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Sajo True #HMC40, 5-Axis, Fanuc 15MB, 24"X, 21.5"Z, 18"Y, 1200 RPM, 45 taper

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Matt Crull

Sajo 40 True 5th axis HMC, Fanuc 15MB,15.75"x19.5" 48 station part loader,48 ATC

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Sajo 40 True 5th axis HMC, Fanuc 15MB,15.75"x19.5" 48 part pallets,lights out oper.

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Sharp CNC & retrofit knee/bed mills w/o ATC, 1997

Netmachinery Inc., Mooresville, NC 704-660-8130 (Fax 704-663-3475) David Kragh

Sundstrand #S80 Omnimill, 72"X,65"Y,54"Z,30"W,new CNC,60"pllts,60ATC,#50,6"bor.spdl.

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Supermax #YCM 40, CNC retrofit knee/bed mills w/o ATC, 1989

Netmachinery Inc., Mooresville, NC 704-660-8130 (Fax 704-663-3475) David Kragh

Tongil Elite #MCH-40, Horizontal machining center,1 Deg.,40 ATC,(2) 47"x47"pallet,'95

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Toshiba #BMC500, 4-Axis,32x24x28",60ATC,TSC,20"pllts,5k RPM,Tosnuc 800,'97,#20290

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Toshiba #BMC630, 4-axis,39"X,32"Y,34"Z,24"pllts,60atc,6k RPM,Tosnuc 888,'97,#19003

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Toshiba #BMC-80E, (6) 800 mm pallets, 40 Tool ATC, Cat.50, Tombstones

Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Fax 513-575-3997) Chris Wilson

Toshiba CNC HMC, 39.37"X,35.1"Y,33.5"Z, 2 pallets,15 HP,Tosnuc 888,1997,#1472

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Toshiba #NX76B, 2-mach.FMS,8apc,34"x30"x30",60 & 38atc,tsc,Tosnuc 888,'02,#20289

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Toyoda #FA450, HMC,23.6"X,17.7"pallets,Fanuc 15M,Cat 40,10000 RPM,64 ATC

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Toyoda #FA450, 17.7x17.7,120atc,Cat 40,clnt thru,12k RPM,Fanuc 15MB,1°,gap sensor,'97

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Toyoda #FA-450II, (2)17"pallets,14k RPM,10 HP,Cat 40,Fanuc 15M,1°,1997,#11296

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Toyoda #FHN-50II, Fanuc 11M,28"X,28"Y,19"Z,(6) 19.7"pallets,5°index,64 ATC,1985

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

Toyoda #FHN50-II, horizontal machining center

J Raymond Machinery Sales LLC, Painesville, OH 216-952-8149 (Fax 440-352-1259) John Raymond

Toyoda #FHN80T, Fanuc 0iM control, (2) 31.5"pallets, 3600 RPM, BT50, 1°, 1981/2003

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Traub Heckert #CW800, 41"X,32"Y,34"Z,new CNC,31.5"pallets,60 ATC,30 HP

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Tsugami #MA3II, 16iM,(10)12"pllts,14.1",12.9",15.7",1°,10k RPM,62 ATC,18iM,CTS,2000

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Vanguard #TH6511B, 4.33"HBM,78"X,78"Y,78"Z,21"W,B-axis,35 HP,40 ATC,Fanuc 18i

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #TH65125x125B/3, 49"pllts,TSC,78"x,47"y,47"z,19"w,35 HP,90 ATC,Fanuc 18i

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #TH6513, 5.11"hbm,118"x,78"y,78"z,31"w,B-axis,60 HP,TSC,40 ATC,Fanuc 18i

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #TH6516, 6.3"hbm,118"x,118"y,39"z,31"w,B-axis,70 HP,TSC,40 ATC,Fanuc 18i

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Wahli #150 True 5 axis HMC, Fanuc 15M,#40 tpr,60 parts,lights out,10k RPM,192 ATC

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Wahli #150 True 5-axis HMC, Fanuc 15M, #40 taper, 10000 RPM, 192 ATC, #944450

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Wahli #50, 2-pallets, 28"X,20"Y, B & C axis capable, low hours, #6249

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Wahli Dixie #100, True 5-axis, 96 ATC, 60 part changer, 12000, lights out operation, 1995

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Wahli Dixie #150, True 5-Axis, 27.5"X, 19.7"Y, 27.5"Z, 60-10K RPM,#40 tpr,Fanuc 15M

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Matt Crull

Witzig & Frank Tri-Flex U-60 Turmat 29-Axis,49.5x15x8.65",3 GE Fanuc,6 trrt,#25704

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

MAKINO A99, 39.4"X, 39.4"Y, 37.4"Z, 1998, Fanuc 16MC, Chip Conveyor, 40 ATC

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax 303-651-6556) Steve Beck

Back to category listings.

= photo available Spec Sheet

= spec sheet available rfq

= request quote from seller camera

= video available web site

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search