CNC MACHINERY & EQUIPMENT:
MACHINING CENTERS, GANTRY TYPE, CNC

MACHINING CENTERS, GANTRY TYPE, CNC CNC MACHINERY & EQUIPMENT - Surplus Record

Used CNC Inc. Specializing in Used CNC Chipmaking Equipment

There are 32 listings in this category
File update: Sun, Feb 5, 2012 01:28

Advanced Search

Sort by:

Original Sort

Burkhardt & Weber #Hyop600, 224"X,150"Y,39.4"Z,Siemens 850,103 ATC,1988 (2)

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati #U-5 Sidewinder, Acra 950,157.5"X,146.2"Y,39.4"Z,60 ATC,#50 tpr,'97,#4686

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Cincinnati, 3 spdl.,5-axis,600"X,84"Y,28"Z,75 HP,7200 RPM,Acramatic 950,#20052

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 3 spindle,5-axis double gantry profiler,1584"bed length,3600 RPM,#60321

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 5-Axis, 3-spindle, CNC gantry profiler, 720"X, 164"Y, 28"Z, 1986

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 5-Axis, 3-spindle, CNC gantry profiler, 720"X, 84"Y, 28"Z, 1988

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 6-Axis CNC gantry style,Siemens 840D,265"X-axis,never run,2005

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Gary Treisman

Cincinnati, 5-axis high speed gantry, 608"X, 333"between columns,2000

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Droop & Rein, 7-axis,Siemens 840D,187"x,126"y,45"z,8"w,49"x197"tbl,89"BC,100atc

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Eumach #MV-5030, double column CNC bridge type machining center,205"x122"x27",2007

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Fooke Endura, Siemens 840CNC,161.4"X,161"Y,63"Z,fixed cross rail,181"BC,16 ATC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Homma, 5-face dbl.column,Fanuc 9M,X-4700mm,Y-2200mm,Z-700mm,3000rpm,1983

HNK Corp, Uiwang Gyunggido, 821095077786 (Fax 82316966362) Kyun Seo

Ingersoll Masterhead, fixed rail, 5-axis, CNC VMC w/heads, APC, GE Fanuc

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Ingersoll, 5-Axis,Fanuc 15i, 200"X,127"Y,49"Z, B&C-Axis, 20000 RPM, 40 ATC

Madison Machinery Co Inc, Hampton Bays, NY 631-728-6103 (Fax 631-574-1280) Joe Madison

Jobs #D32, Fidia M30,80"x230"tbl,177"X,70"Y,55"Z,16k RPM,5-Axis,hsk63,1997,#M4490

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Kao Ming #KMC-6000SV-H, 5-face bridge mIll,234x49.5x30.5",8k RPM,Fanuc18i,50 hrs,'09

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn

Par, 5-Axis, 360"X,144"Y,60"Z, 30000 RPM, vac tables, Aerospace

Fluid Forming Technologies, New Fairfield, CT 203-746-6409 (Fax 203-746-2199) J P Cheneski

Parpas Omnia #32, 5-axis,118"X,98"Y,78"x157"tbl,22k RPM,Selca 3045,2001,#17873

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

Parpas Omnia #32, 5-axis,dbl.col,118"X,98"Y,59"Z,22k RPM,Selca 3045 CNC,'01,#17885

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

Quickmill Eliminator #20-238-54, Fanuc 31i,5-Axis,Cat 50,10k RPM,6900 hours,2009

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Quickdrill #96-180, drilling machine, 180"X, 96"Y, 10"Z , #3462

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

SNK #CNC-3-SP, 5-axis, 120'X, 164"Y, 28"Z, Allen-Bradley 7320, #10769

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

SNK #RB-2N, 108" x 69" x 15.7"(quill), 35.4"cross rail travel, Cat 50, 24 ATC, Fanuc 9, 1982

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Toshiba #MFG16120 Proflr,new cnc,full contour.A/B-axis,tilt,swvl.mill hds,634"X

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Toshiba #MPF-2140, 5-Axis VMC,Fanuc 888,157"x70"tbl,#50 tpr,30 ATC,12k RPM,'97

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Vanguard #20x40R, 78"x 157"tbl,165"X,106"Y,39.37"Z,44000 lb.tbl.load,Fanuc 18i

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #GMB100x20, 39.37"x 78.74"table,40-6000 RPM,25/30 HP,20 ATC (790351)

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #GMB125X25, 49.21"x 98.42"table,40-6000 RPM,25/30 HP,32 ATC (790352)

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #GMB125X30, 49.21"x 118.11"table,40-6000 RPM,25/30 HP,40 ATC (790353)

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Vanguard #GMB160X30, 62.99"x 118.11"table,40-6000 RPM,40/50 HP,40 ATC (790354)

Vanguard Machinery Intl LLC, Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Zimmerman #FZ37, 118"X, 98"Y, 49"Z, Fidia C-20 control, full 5-Axis, 2004

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax 440-232-5541) T. Wigglesworth

Zimmermann #FZ-20, 3-axis,CNC gantry type foam pattern mill,94.5"x240",Fanuc ctrl,1996

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Back to category listings.

= photo available Spec Sheet

= spec sheet available rfq

= request quote from seller camera

= video available web site

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search