SELL: Jet Edge Model 55-50 4′ x 8′ 2-Head Waterjet

Want to Sell Jet Edge Model 55-50 4' x 8' 2-Head Waterjet
Jet Edge Model 55-50 4' X 8' AMC WATERJET

SPECIFICATIONS:
Work Envelope…………………….30" x 48"
X or Y-Axis Positioning Tolerance….. /-0.005"
X or Y-Axis Repeatability Tolerance… /-0.001"
Cutting Speed X or Y-Axis………….2-25 IPM
Maximum Traversing Speeds………….300 IPM
Ambient temperature……………….50-95 Degrees F
Relative humidity…………………Non Condensing, Maximum 95% at 100 Degrees F
Input pressure……………………Minimum pressure 40 psi (3 bar)
Input temperature…………………Maximum temperature 70 Degrees F
Filtration……………………….On-board filtration to 0.45 micron
Heat Load (BTU/HOUR)………………25,290 BTU
Motor……………………………50 HP
Maximum Rated Orifice Size…………0.015" (0.38mm)
Output pressure…………………..55,000 psi (3800 bar) continuous for the Series 55 and Series 60 pumps
Water Output Flow Rate…………….1.0 GPM
Motor Type……………………….Electric, Wye-delta start
Hydraulic Pump Type……………….Axial piston, variable displacement, pressure compensated
Hydraulic Pressure Rating………….3050 psi (210 bar) maximum (Model 55-50)
Hydraulic Cooling…………………Flowing water jacket heat exchangers
Hydraulic Filtration………………10 micron full flow
Hydraulic Fluid type………………Medium grade turbine ISO (Standard)
Hydraulic Circulation pump…………13 gpm (49 Lpm) at 60 Hz; 11 gpm (42 Lpm) at 50 Hz (Model 55-50C Only)
Machine Dimensions………………..71" x 36" x 53"
Machine Weight……………………2,500 LBS

EQUIPPED WITH:
Aqua-Slim control PC Based Control
Dual Heads
Manual Z-Axis
50 HP Motor
AccuStream 55,000 PSI Pump
Jet Edge OmniJet cutting head

**29,177 Hours on Pump, Maintained with New Parts**
**Unde r Power for Inspection and Runs Great, Cutomer Selling Due to Work Slowdown**
**Buyer Responsible for Verifying Specifications & Options**
Contact: John Molander, Owner, Tight Tolerance Machinery, Peoria, Arizona 85383 United States E-Mail: tighttolerancemachinery@gmail.com Tel.: 6025164267

Comments are closed.